Become a Patron!

i am a new vapour:D

Please help me i am new to this i have bought a Innokin Coolfire IV Tc100 and the problem is that i get E-liquid in my mouth i did everything as per instruction and saw some videos on youtube but nothing fixing it its a SS coil.
 

SMOKIE

THE MODFATHER
Staff member
VU Senior Leadership
VU Senior Administrator
Senior Moderator
VU Donator
Platinum Contributor
VU Live Leadership
Show Host
Reviewer
Vape Media
VU Live Host
Member For 5 Years
Please help me i am new to this i have bought a Innokin Coolfire IV Tc100 and the problem is that i get E-liquid in my mouth i did everything as per instruction and saw some videos on youtube but nothing fixing it its a SS coil.

There are two main seals in the isub tanks that seem to be the leak issue.

The seal in the chimney (sits on top of the coil), and the O-right one that the coil goes through.

Check both of those are in good condition. You get a couple spare chimney ones in the box, same with the bottom O-ring.
 
i cant figure out which one are u talking about i mean u can only see 1 Oring and 1 seal ill upload some pics please point out for me sorry i m dumb in these things dont want to spoil it.
 

Attachments

  • 20160730_190831.jpg
    20160730_190831.jpg
    1.9 MB · Views: 8
  • 20160730_190850.jpg
    20160730_190850.jpg
    1.1 MB · Views: 7
  • 20160730_190930.jpg
    20160730_190930.jpg
    1.1 MB · Views: 7
  • isubv-21.jpg
    isubv-21.jpg
    195.2 KB · Views: 5
  • 20160730_190943.jpg
    20160730_190943.jpg
    1.1 MB · Views: 7

SMOKIE

THE MODFATHER
Staff member
VU Senior Leadership
VU Senior Administrator
Senior Moderator
VU Donator
Platinum Contributor
VU Live Leadership
Show Host
Reviewer
Vape Media
VU Live Host
Member For 5 Years
Did they give you extra O rings, look to see if there is one for the top of the chimney. I do not have this tank but just trying to help you out. Also make sure all the seals are fitted correct.

Capture.JPGyy6yyyy54h5.JPG
 
I think so i fixed it or maybe i was not doing it properly.Whenever i use to fill the Ejuice i use to smoke right away but yesterday i filled the half tank and i waited for like 10 mins and it worked no juice in my mouth haha:D

Ill try this way one more time i hope so it works and i really appreciate for the quick response for you thanks...
 
I want to know what the difference between Titanium,Stainless Steel,Nickel coils?? which coil is better right now i am using SS coil and how do i know the coil is gone bad???
 

BigNasty

Diamond Contributor
Member For 4 Years
ECF Refugee
I see your problem.
You are smoking your tank.
Allow the juice to soak in and vape your tank.
You will know when it goes bad, a. no vapor, b. tastes like you are licking Satan's taint and c. acrid foulness.
 

ChrisL

VU Donator
Silver Contributor
Member For 4 Years
I want to know what the difference between Titanium,Stainless Steel,Nickel coils?? which coil is better right now i am using SS coil and how do i know the coil is gone bad???
You use the Nickel(Ni200) and Titanium (T1) in temp control mode. You can use SS in both power/wattage mode and also temp control. Different metals have different resistances, thus you get different vape performance. It takes trial and error to find which coil you prefer, whether it is for flavor or vapor production. I personally use Ni200 in temp control for flavor and consistency, and standard kanthal for my lower wattage devices. Not much luck with SS. Welcome to VU.
 
I personally use Ni200 in temp control for flavor and consistency, and standard kanthal for my lower wattage devices. Not much luck with SS. Welcome to VU.

I am using SS coil and i am using it on 50 watts and i would like to know if i take it to 80 or 100 whats the difference as in i can set the temperature bit confused now?
 

ChrisL

VU Donator
Silver Contributor
Member For 4 Years
I am using SS coil and i am using it on 50 watts and i would like to know if i take it to 80 or 100 whats the difference as in i can set the temperature bit confused now?
Try the SS coil in temp mode around 450-500F and see how the flavor/vapor production is to your liking. You might also try the SS coils in power mode at 50 watts, and work your way up until you find the "sweet spot". See which one provides you with the most satisfying vape experience.
 
thanks guys for those replies just 1 more thing i m using currently using Blue velvet by cake 60/40 3 mg really like it and what if i want to try a new flavor/e liquid so how do i switch it to new flavor how do i remove the old one can i wash the tank after removing the coil?
 

ChrisL

VU Donator
Silver Contributor
Member For 4 Years
thanks guys for those replies just 1 more thing i m using currently using Blue velvet by cake 60/40 3 mg really like it and what if i want to try a new flavor/e liquid so how do i switch it to new flavor how do i remove the old one can i wash the tank after removing the coil?
Yes, but sometimes it is difficult to get rid of the older flavor. Change the coil for sure, and like most of us, consider an extra device/tank so you can use more than one flavor at a time. I have 10 box mods, 2 mech mods and 2 pen devices with a different flavor in each one. Crazy, sure, but I like variety....;).
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Yes, but sometimes it is difficult to get rid of the older flavor. Change the coil for sure, and like most of us, consider an extra device/tank so you can use more than one flavor at a time. I have 10 box mods, 2 mech mods and 2 pen devices with a different flavor in each one. Crazy, sure, but I like variety....;).

I have a juice that If i use it in a tank, it'll still taste like ti 3 tanks later lol. I only use it on RDAs now and have to change the cotton to switch flavors. It overpowers everything lol
 

VU Sponsors

Top