Speaking from personal experience with my Stillare V3, you have a short in one of your coils, meaning one of your leads is either too short or not fully secured and it's burning when you fire the mod, the Stillare V3 is tricky!
any tip i can do to repvent that?
When you wrap your leads around the negative screws hold them as tight to the screw as possible and make them wrap around in the same direction that you'll be tightening the screws so as you tighten the screws it makes the leads more secure
It def made the taste go away! thank you! i sometimes feel the burnt but when i open it i see the cotton is dry. but otherwise once its dripped again its good thank you!
You're very welcome!! Glad I could help solve the problem!It def made the taste go away! thank you! i sometimes feel the burnt but when i open it i see the cotton is dry. but otherwise once its dripped again its good thank you!
Turn down the wattage, you probably don't need more than 30.
I'll give you the same advice I gave OP, look for any shorts or hotspots in your build while there is no cotton in it then check all connections, rewick and try again!
Thanks, i did and for the mephisto it worked like a charm, Still having a little trouble with the Little Boy but im gonna go ahead and take it to my local shop and let them have a look at it
Glad it worked and the other thing I can think of is that one of your leads may be too short causing it to burn, it's happened to me in the past
All of them are long enough to peek on the other side of the post, due to clipping them they do have a tiny bit left over.
Double check and make sure those extra pieces are still connected, I've over tightened screws before and severed the leads
