Become a Patron!

I need suggestions for a new tank, please.

F

fckaugust8th

Guest
Hi all, I would like some suggestions for a tank to sit on top of my new Mini Volt. This is going to be an ultra stealth set-up. I MTL and so far I have Nautilus ( both standard and mini), Goblin, Goblin mini, Goblin nano, Pico, Kabuki (clone),GS Air TC, plus a bucket full of regular size tanks. It has to be black to fit in with the red&black mod, I build my coils but either rta or pre-made coils is fine.
Thank you
 
Markw4mms

Markw4mms

#Team Jimi Supporter
VU Donator
Diamond Contributor
Member For 4 Years
ECF Refugee
I suggest a Lemo Drop. I have one, and it's a good little tank if you don't mind building.

lemo-drop-by-eleaf


free-ship-dhl-100-original-ismoka-eleaf-lemo.jpg
 
F

fckaugust8th

Guest
Thank you both for the suggestions. Both are good tanks, they're in the bucket I mentioned in my first post, they get used once in a while, but I'm looking for something very short, about as tall as the Goblin mini or shorter.
 
chris.ardito.3

chris.ardito.3

Silver Contributor
Member For 4 Years
Brewbear said:
Thank you both for the suggestions. Both are good tanks, they're in the bucket I mentioned in my first post, they get used once in a while, but I'm looking for something very short, about as tall as the Goblin mini or shorter.
Click to expand...
Have you look at the Super Tank Mini by Tobeco


Sent from my iPhone using Tapatalk
 
F

fckaugust8th

Guest
@chris.ardito.3 Sure did! I hate to sound so prissy, or Goldilocks-ish but the mod I'm talking about is about 2/3 the size of the eVic Mini so most tanks would look ginormous on it. There in my dilemma!
 
F

fckaugust8th

Guest
@skt239 That is a very nice set-up. My little Mini Volt is about 2/3 the size of the mod in your picture so the Heracles would be way too big. Right now I have a Pico RTA on it and that looks almost too big. I did consider the Nectar nano but I don't think I want a genesis tank and I do not want a RDA - Bambino or Derringer- since this is my hide away vaping on the sly set-up. It is getting to be a quest !
 
skt239

skt239

VU Donator
Platinum Contributor
Member For 4 Years
Brewbear said:
@skt239 That is a very nice set-up. My little Mini Volt is about 2/3 the size of the mod in your picture so the Heracles would be way too big. Right now I have a Pico RTA on it and that looks almost too big. I did consider the Nectar nano but I don't think I want a genesis tank and I do not want a RDA - Bambino or Derringer- since this is my hide away vaping on the sly set-up. It is getting to be a quest !
Click to expand...

Sorry about that, I completely forgot about the mini volt part when I read Evic in your last post.
 
fq06

fq06

Gold Contributor
Member For 4 Years
I really like the look of that mini volt, too low in power for most of the tanks/buils I vape but could be cool with a single coil mini tank.
Looking forward to seeing what you put together with that mod.
 
Heabob

Heabob

Gold Contributor
Member For 4 Years
Member For 3 Years
20mm Dia.
https://www.fasttech.com/products/3...authentic-aspire-triton-mini-tank-clearomizer

18.5mm Dia.
https://www.fasttech.com/products/3006/10012000/3702701-subtank-nano-styled-clearomizer
Clone tho, Black with red seals, wonder if they will make a toptank version of this.
https://www.fasttech.com/products/0/10018680/3964306-authentic-vapesoon-glass-tank-for-subtank-nano
Or the authentic version, but it seems kinda pricey here:
https://www.fasttech.com/products/0/10004861/3919200-authentic-kangertech-subtank-nano-clearomizer

Although my Tron-S is 22mm dia., it seems shorter than others I've got anyway.

Not much available in 18mm Black...
 
F

fckaugust8th

Guest
@Heabob Thank you for the input. At 60 mm in height, the Triton mini is 4 -5 mm taller than my mod:confused: This is turning out to be a hard to find item, harder than chicken teeth:eek:
 
Heabob

Heabob

Gold Contributor
Member For 4 Years
Member For 3 Years
Brewbear said:
@Heabob Thank you for the input. At 60 mm in height, the Triton mini is 4 -5 mm taller than my mod:confused: This is turning out to be a hard to find item, harder than chicken teeth:eek:
Click to expand...

I see that, nobody has any shorter ones either...
 
Heabob

Heabob

Gold Contributor
Member For 4 Years
Member For 3 Years
Wow, so small...
Looks like the mod maker should have made a matching scaled tank to go with it.
 
vuJim

vuJim

Gold Contributor
Member For 4 Years
ECF Refugee
Reddit Exile
You wrote "tank," so I assume you mean tank, as opposed to an RTA or RDA?

Below is a snap of my wife's Mini Volt with my GS Tank (N.B.: "GS Tank," not "GS Air" or "GS Air Tank") atop it, pictured next to my eVic-VTC Mini with a Vector RDA atop it.

Mini-Volt+GS-Tank.jpg


(I apologize for the quality. Looks like the camera lens has some crap on it.)

It's unfortunate eLeaf doesn't make the GS-Tank in other than polished stainless. Other than that it's a terrific little tank. You can knock the airflow down far enough for a very nice MTL vape, or open it up for a "decent" DL vape.

Sweet Vapes has the tank for $13.95, and, last I looked, had a selection of coils for it, too. I like the 1.5Ω coil best. I've used both 70/30 and 50/50 in that tank.
 
F

fckaugust8th

Guest
vuJim said:
You wrote "tank," so I assume you mean tank, as opposed to an RTA or RDA?
Click to expand...
I did mean tank, I already have a Derringer and a Bambino but they go thru the battery kinda' fast so now I'm using the Pico with a CLR coil buid 30g Nichrome 80 2.5 mm 12 wraps at 2.24 ohms. At 10 watts it is really nice with just one airflow hole open.
 
vuJim

vuJim

Gold Contributor
Member For 4 Years
ECF Refugee
Reddit Exile
I can run my GS Tank, with the 1.5Ω coil in it, on my eVic-VTC mini for days upon days. I think I run it at 14W?

If I didn't already have my sights set on a dual-18650 mod, another RDA and another RTA: I'd get a Mini Volt for myself just for the GS Tank.
 
head_jt

head_jt

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
There's always the tfv4 micro tank

Sent from my XT1030 using Tapatalk
 
ChrisL

ChrisL

VU Donator
Silver Contributor
Member For 4 Years
Whichever tank you decide to get (I suggest a black V1 Herakles) , a small "pom" style drip tip seems to make a tank seem stealthier.
 
lzbobcat

lzbobcat

Member For 4 Years
Member For 3 Years
Since you were considering the Nano, the in'ax 22 is a good one also. It's really easy to build compared to the Genesis imo. Holds around 3mls. The flavor is awesome, but you won't get large clouds and huge airflow. I use the 22 and the in'ax dripper as my stealth setups on a Hana mini. Another good thing is that you don't need a lot of wattage for In'ax's. I run mine at around 20 watts, and it lasts all day. They are kind of pricey though. Good luck with your tank quest!


Sent from my iPhone using Tapatalk
 
F

fckaugust8th

Guest
That looks good but at $ 145 it is four times as much as the mod. Right now I have the Pico but I am re-coiling the Kabuki and maybe that will work....at least for today or until .....
 
F

fckaugust8th

Guest
CoV makes a mini Vengeance but it is only sold in the kit with the black or gunmetal Mini Volt.
 
juicy76

juicy76

Silver Contributor
Member For 4 Years
Member For 3 Years
I bought mine last week and watched a YouTube video ... Built it and haven't looked back. Keeping in mind I have been a die hard dripping fool. I dripped for 4 1/2 years before buying any tank.I was the most sceptical person in the community IMHO and I love this thing
 
K

kjwendell1979

And the Vector, my go to rda and rta's. They both look awesome on the sigelei or the simpl
3ac3f42e0a31d568a193549fa4fc229c.jpg


Sent from my SM-N900V using Tapatalk
DERP. I saw stealthy tank and posted the goblin mini before seeing you already have one
 
Last edited:
F

fckaugust8th

Guest
Brewbear said:
This is how it's looks with the Pico
Click to expand...
This is what I'm working with! I have the Goblin Mini and the Vector RDA, I just wanted something in single coil. I actually have the Goblin Nano that is even tinier than the Goblin Mini but that is strictly a 2 coil RTA.
 
F

fckaugust8th

Guest
@vuJim I did mean tank but I am not excluding RTA's, I am using a Kabuki (clone) with the Nautilus RBA and that works out very well. The Nautilus RBA's are very small and a bit of a PITA but worth the effort IMHO. Using the RBA in the Nautilus/mini requires a thick o ring/washer included with the kit that is installed next to the gasket on the top part of the tank. Other than that is smooth sailing. On the Kabuki side of things, you'll have to replace the glass with the Zephyrus glass to make-up the difference in height.
I would be calling it a day but both tanks are stainless or silver color so......
 
F

fckaugust8th

Guest
Quick update, I bought another Mini Volt (black) with the LowPro RDA (not that I needed the RDA) and a CoV Defiant tank. I think I'm set for today!
 
BPROSEK

BPROSEK

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Just got my defiants in today, bout to start vaping it and will update, but thus far out of the package it's a COV winner. Same precision machining as vengeance, top fill super smooth, ceramic coil looks good to go. Perfect blend of vengeance and micro-vengeance imo.
 
You must log in or register to reply here.

VU Sponsors

Top