Innokin Coolfire 2 fires on its own

[Aaronhami924]

I've even taken it apart and cleaned it. Just sitting there, it will start firing on its own. Just rebuilt it again, vaprd on it and let it sit. Its been sitting for about 5 minutes and just started to fire. Any ideas? The switch does not seem to be stuck.

 

[Aaronhami924]

Also, the led b3hind the button does not glow when it self fires. But it does when I push it. So odd. Its been sitting for 20 minutes now and just started firing. And no 10 second shut off, it just keeps firing.

 

[fuzzyone]

You have juice on the motherboard. I had a buzzpro that did the same thing. Basically, your board is soon to be toast.

Sent from my LGL75C using Tapatalk 2

 

[Warhawk-AVG]

You can use 91% or higher isopropyl alcohol and a toothbrush, scrub it down heavily w/ the alcohol, let dry for a few hours, it should work. Believe it or not a layer or two of clear nail polish once it's working right as conformal coating will prevent it from shorting out if juice leaks on it after that, not so much the switch though

Posted from NARFatalk!!

 

[Aaronhami924]

ok, thanks