IPV D2 Coming Soon

[pdasterly]

i notice they don't update their website until after 5 west coast time

 

[Maverik_X]

i notice they don't update their website until after 5 west coast time

thats cause they are still waiting to get them from the airport. they are going by a tracking number for their shipment. if they get them today they will most likely send them out late afternoon or tomorrow. they may only print shipping labels today.

 

[harpo1]

thats cause they are still waiting to get them from the airport. they are going by a tracking number for their shipment. if they get them today they will most likely send them out late afternoon or tomorrow. they may only print shipping labels today.

No they sent out an email stating they came in and would get the pre-orders out today.

 

[Maverik_X]

No they sent out an email stating they came in and would get the pre-orders out today.

does anyone shipping show accepted at post office?

 

[harpo1]

does anyone shipping show accepted at post office?

Probably won't see that until tomorrow since UPS picks them up from 101 vape.

 

[Maverik_X]

From 101's website ,notice the time :

8-4-15 6:47pm

We just checked in our order but it is too late to ship the orders today. We will begin filling and shipping first thing in the morning in the order the orders were received. We have enough to fill ALL of the pre-orders with a few extra. All purchases from this point on are considered in stock but will not ship until after the pre-orders.

picked them up from the airport

 

[harpo1]

From 101's website ,notice the time :

8-4-15 6:47pm

We just checked in our order but it is too late to ship the orders today. We will begin filling and shipping first thing in the morning in the order the orders were received. We have enough to fill ALL of the pre-orders with a few extra. All purchases from this point on are considered in stock but will not ship until after the pre-orders.

That was yesterday.

 

[Maverik_X]

Im not going to argue its pointless. All the vendors get their stuff at the same time. Crap comes in on a plane customs holds on to it for inspection then the vendors either have a carrier or they themselves pick it up after customs clears it.
they use the tracking number provided by the factory to track their package.. they very well could have come in last night. but didn't clear customs till later.

 

[harpo1]

Email from 101 Vape
Hello,


We would like to thank you for your patience on your pre-order for the IPV D2. As of last night (Tuesday 8-4-15) we have received in all of the IPV D2’s and we are working throughout the day to ensure that every pre-order ships out today. Once your order ships we will be provide a tracking number to you that will be emailed over.

 

[Maverik_X]

smh you have never had a vendor lie to get more sales? they track their stuff they see its landed then update their page to show instock cause they will most likely ship within 24-48 hrs. Regardless customs still has to clear the shipment. it's the fetchin government they don't work after 5. so it gets stored in a holding warehouse. they do this to get more sales and get all the customers off their back who pre-ordered. not to mention it drives more traffic to their website which helps their google ranking. Savvy?

Crash course for ya
http://science.howstuffworks.com/transport/flight/modern/customs.htm

http://backlinko.com/google-ranking-factors

 

[f1r3b1rd]

I call it Ninja Marketing

 

[Maverik_X]

I call it Ninja Marketing

 

[Jah]

label created and post office picked up my shipment, no movement past that for me yet

 

[dre]

I'm only seeing shipment information received by UPS at 1:47pm yesterday no other movement. Ups doesn't even have my package yet

Sent from my XT1030 using Tapatalk

 

[Jah]

Im a big fan of USPS priority, except when my mail carrier spazzes out

 

[TwitchVaperMVG]

Here's a review for the iPV D2 if anyone's interested:

 

[Jah]

did you order from 101vapes ?? i did and was expecting postal delivery but got ups notice,,thats going to create a major delivery problem for me,since my mailing is a po box

Yeah 101 vape, but sprang for priority usps shipment. It didnt deliver today and has tomorrow listed as delivery. You probably wont have any problems with PO delivery, the usps handles that part for this particular type of UPS shipping

 

[AdubbaU]

101vape too, shipped whatever day they said it would and delivered here today in AZ. Surprising how quick it goes here, eg. Hit Phoenix, at 5am, routed to city 30 miles away and sorted and on truck by 9am. Not to rub it in, just for shipping reference.

Sent from Sprint HK M8 Tapatalk

 

[dre]

Mines finally out for delivery two days earlier then expected

Sent from my XT1030 using Tapatalk

 

[Mattp169]

mine is at the local post office as an hour ago, not sure if it will go out today for delivery. It might. I hope

 

[pdasterly]

mine arrived at post office on friday

 

[dre]

Check USPS tracking its up to date so maybe it's coming today

Sent from my XT1030 using Tapatalk

 

[pdasterly]

usps doesn't move lol, says pre-shipment info sent to usps

 

[dre]

No silicone sleeve came with mine from 101vape

Sent from my XT1030 using Tapatalk

 

[pdasterly]

that sucks, do they even sell it?

 

[dre]

Not that I've seen

Sent from my XT1030 using Tapatalk

 

[tcg]

Just got mine from 101 vape. Silicone sleeve was on the mod in the shrink wrapped box.

 

[pdasterly]

got mine today
has rubber sleeve already installed on it, from 101vape
Now i need a rta that doesn't leak

 

[dre]

Lucky my 101 d2 didn't have the sleeve. Does your read .008 lower then other mods . my .090 build on my ipv3li reads .082 on the d2

Sent from my XT1030 using Tapatalk

 

[pdasterly]

my aerotank reads perfect, the sleeve was on the device already

 

[Myk]

Lucky my 101 d2 didn't have the sleeve. Does your read .008 lower then other mods . my .090 build on my ipv3li reads .082 on the d2

.00X? Mine read .0X different just from room temperature or body temperature transfer differences.

 

[dre]

Goblin mini and d2 is my new on the go set up

Sent from my XT1030 using Tapatalk

 

[dre]

Anyone withe a ipv3 Li notice the d2 gives a better vape with titanium then the Li? I think the ipv 3 is a little weak and needs a firmware update

Sent from my XT1030 using Tapatalk

 

[Wingsfan0310]

Anyone withe a ipv3 Li notice the d2 gives a better vape with titanium then the Li? I think the ipv 3 is a little weak and needs a firmware update

Sent from my XT1030 using Tapatalk

After I updated the IPV3 Li it goes up to 100j with Ti. Your saying your D2 is more powerful with 50j than the Li is on 100j? I don't have a D2 so I can't compare but I'm surprised

Cheers,
Steve

 

[dre]

Not that is more powerful just the vape feels fuller then the LI

Sent from my XT1030 using Tapatalk

 

[Maverik_X]

what is LI ?? im having a duh moment

iPV3 Li

 

[dre]

I figured out why I'm d2 ohm is lower then my ipv3li. The 510 spring is a lot stiffer in the d2 so I think it's more accurate. Better connection.

Sent from my XT1030 using Tapatalk

 

[Myk]

I figured out why I'm d2 ohm is lower then my ipv3li. The 510 spring is a lot stiffer in the d2 so I think it's more accurate. Better connection.

Sent from my XT1030 using Tapatalk

I was going to suggest trying to lock the lesser one in at a higher reading. My D2 seemed weak (oddly even at higher temperatures). I checked where that atty was locking in on my iPV4 and locked it in around the same on the D2 and now it's more satisfying.
I noticed this on the iPV4 with nickel, it was a little better with a different build, the problem wasn't there when I switched to titanium.
I don't know what the future will bring with TC but lock in temperature differences and ohm differences in all the connections is an issue.

 

[KaBoomStick]

Mine was supposed to be here today. Ah well. Guess I'll have to wait till tomorrow.

 

[dre]

I was going to suggest trying to lock the lesser one in at a higher reading. My D2 seemed weak (oddly even at higher temperatures). I checked where that atty was locking in on my iPV4 and locked it in around the same on the D2 and now it's more satisfying.
I noticed this on the iPV4 with nickel, it was a little better with a different build, the problem wasn't there when I switched to titanium.
I don't know what the future will bring with TC but lock in temperature differences and ohm differences in all the connections is an issue.

The lesser ohm value is the most correct I believe. You just might have to turn up the the temp to get the same vape like the other mods. The ipv4 and 3li 510 spring is a lot weaker then the d2. So the connection isnt as good as the d2.

Sent from my XT1030 using Tapatalk

 

[Maverik_X]

The lesser ohm value is the most correct I believe. You just might have to turn up the the temp to get the same vape like the other mods. The ipv4 and 3li 510 spring is a lot weaker then the d2. So the connection isnt as good as the d2.

Sent from my XT1030 using Tapatalk

@dre there are also wiring differences, solder points, types of alloys, thickness, mass of the mod that all play a role in the reading.

 

[Myk]

The lesser ohm value is the most correct I believe. You just might have to turn up the the temp to get the same vape like the other mods. The ipv4 and 3li 510 spring is a lot weaker then the d2. So the connection isnt as good as the d2.

Sent from my XT1030 using Tapatalk

I'd never assume all springs are the same. Even if they're out of the same lot.
But I don't think that's it here (at least not the whole answer). The Ni vs TI was on the same mod, same atty, even Ni vs Ni slightly different build. Plus it was my D2 that was the weaker hitting with the same atty.

It would make sense that the lowest possible reading is the most correct you can get, but turning up the temperature wasn't making up for it. Perhaps there are other issues at play. The Ω increase isn't linear is it? Maybe an increase in temperature loosens a connection.
I'm curious what happens when my room temperature drops 5-10 degrees in winter. But I'm sure I'll love the boost I get when I take that first hit on a cold tank.

I heard Dimi talking about Phil B and DrF, mentioning this type of stuff. It is a limitation to TC. We would need more exact lock in to get exact temperatures compared to what we set them at.

 

[dre]

Any ipv3 Li owners and d2 notice the d2 works much better in titanium mode then the 3?

Sent from my XT1030 using Tapatalk

 

[dre]

I got a work around the minimum voltage in power mode of 3.2-4.2 depending on battery level. Set it in j mode and ti01 and you can fire below battere voltage. I recently put a nichrome.30ohm build and it was to hot and in power no matter how low the watts were it was the same as 50w. But in Joule mode I can get my 36w were I like it

Sent from my XT1030 using Tapatalk

 

[Mattp169]

all i know is i got a dual coil ni200 for my maganus today and on my d2 at 500F 50J My jusice has never tasted better. I love my little d2. perfect size, perfect abilities. Not too fancy, but fancy enough, just would prefer it to be not all black, some silever would have been nice on it