hi all, i purchased a joyetech cuboid mini today and it seems to be a great 80w mod, however when using the notch coil, after a few hours it seems like the coil is flooding. it spitting hot liquid into my mouth and barely seems to be vaporizing any of it. any ideas what what might be the problem ?
Become a Patron!
joyetech cuboid mini notch coils
- Thread starter miks1
- Start date
Kind of same problem here with both NotchCoil and the 0.5ohm SS head. I have witnessed your problem a couple times. My bigger problem is that always when I fill the tank, it instantly completely floods the coil and seems that I can't do anything to help. I have to wipe the coil a little, wash the mouthpiece because it is full of liquid, and try to ramp up the power.
65vg/35pg liquid, air intake full or almost fully open.
NotchCoil I have used temp mode at 40-50w and around 210-250c, 0.5ohm SS around 30w and same temp.
Currently using the 0.5ohm at wattage mode at 26w, seems more reliable.
65vg/35pg liquid, air intake full or almost fully open.
NotchCoil I have used temp mode at 40-50w and around 210-250c, 0.5ohm SS around 30w and same temp.
Currently using the 0.5ohm at wattage mode at 26w, seems more reliable.
Thank you for the information. I'm sorry you are having problems 
Sounds like they still need to fix their leaky flooding coil problem before producing more. Same issues as the cubis tank coils. I will wait until they resolved the quality of the coils before buying. Thanks for helping me not waste more money.
Sounds like they still need to fix their leaky flooding coil problem before producing more. Same issues as the cubis tank coils. I will wait until they resolved the quality of the coils before buying. Thanks for helping me not waste more money.