75w IPVD2 might be a contender. TC is always a good option...
Agreed, I have not ever picked a mod based on the size of an atomizer either, but as I was re-reading the thread, it seemed to me that no matter how good the smaller mods are, the Subtank Plus is very large and heavy. I can see the potential for it to fall over very easily. @f1r3b1rd has a very good point, a dual battery mod will accommodate any atty easier than a smaller mod will.
That 150tc actually does look hot with the subtank plus though.... just found this in the Google. (it hurt to say that... not a fan of the kanger for personal reasons)
LOL! I understand that pain! I'm still using my Subtank Mini (original with updated build deck), and while it isn't great, it isn't bad. I really don't know what to replace it with, which is why I'm still using it. I think I want the Saucecode and the Crown, they both seem to fit the bill for what I need, but even if I could find them both, I can't afford them both.That 150tc actually does look hot with the subtank plus though.... just found this in the Google. (it hurt to say that... not a fan of the kanger for personal reasons)
Back off topic...because I think the OP would love it as a next step also....
Okay, since we are back off topic, how good is the flavor from the Saucecode? I'm a flavor chaser, not a cloud chaser. What's the airflow like on the KF4? I looked at them, but with all the parts in the deck section alone, I was a little put off.
The saucecode is good! Its another Atlantis spoof if you know what I mean. Between it and the silobeast, my vote is for the silo beast.
Those rba decks fit in the silo beast just fine... Anything that would in an Atlantis works in it. The triton rba kit looks bad ass, it mimics the style of an Atlantis verticle coil rather than a tiny kayfun deck. And you get it separate for 10$ then can use it in anything that accepts Atlantis coils.
You may like this..I have a v2 that I used for a while in tc mode on the dna40s;because the kf4 sucks for ni200.I haven't checked out the Silo Beast at all, but I actually got to check out the Triton RBA kit at a local shop. It is much more of a PITA than it looks. I have stayed away from the Aspire line for a LONG time because I had horrible experiences with their tanks early on. I had great luck with the Kangers back then, so I stuck with them even when the Subtank coils essentially killed my flavor. Once I switched to the RBA deck though, they became reasonably good. My Russians have been rock solid through everything though, if only they could be updated ...
Not necessarily when you factor in maintenance cost and the cost of the less expensive rbas. Granted it all comes down to figuring out how you want the rba to perform and finding what matches.
The maintenance cost on a subtank is almost nothing if you are using an RBA deck. Essentially it becomes the same maintenance cost as an RTA, wick and wire only. That is the reason I don't use pre-built coils and absolutely must have a deck with any subtank I own. I can afford to spend $25 or so on a Subtank that may only get used a couple times, I can't afford to spend $75+ on a good RBA that I might not end up using. So I read a lot, and research a lot, and put hands on gear in any shop I can find, and try and check everything out so that when it comes time for me to spend I have a pretty good idea of what I am getting into. The big problem is the speed at which things are coming out. Every time I think I have found the perfect product, a new one or improved one comes out and the cycle starts all over ... LOL!Not necessarily when you factor in maintenance cost and the cost of the less expensive rbas. Granted it all comes down to figuring out how you want the rba to perform and finding what matches.
And those huge airholes are misleading, it still comes down to the bottleneck at the post. it is substantially more than the 3.1; but, not at all what it least Looks like.... its closer to what you get from a lemo. Check the hole on the post under the coil
At least that much bigger, probably more, I sold mine so I can't compare side by side.
would preorder a cthulo2 if I were in your shoes, single or dual coil
I'm glad you found something that works for you. Like I said earlier, the Subtank is just okay, better than anything else available when I got it, but now looking like it's time to move on for me.
If you do get the SauceCode RBA Kit or the SauceCode (comes with the RBA) itself, be careful with the negative post. I have both and recently build a coil and put it in the RBA Kit, in order to use it in my Triton. Just positioning the coil bent the negative post. I also read a review, were the post broke off. I still put the RBA in the Triton and it became THE flavor tank. However, the coil's legs need to go under the screws, which can be a PITA!
So properly built, the Saucecode RBA does fit in the Triton? If I can't find the tank, maybe I can just find the RBA and a Trition... Hmmm ....
That looks the same as the SauceCode RBA Kit. The RBA of my SauceCode (Tank) is missing the notches at the deck.
Yep.
@f1r3b1rd ... Eleaf Lemo or Melo? I thought the Melo took coils and the Lemo was the RTA. I don't have either, am I confused?
Melo my bad-- lemo is an rba
No worries! I was just confirming. I do tend to get confused on things sometimes as I don't have anything other than a Kanger SubTank, some Russian 3.1s, a couple RDAs and some Gennies ... Far too much other stuff out there to keep track of, and no cash to own it all!!! LOL
