need info/help . Smok TFV8 rebuildable

[rduncan06]

Okay Guys , I'm not new to vaping , but def new to Sub Ohm..I tried it, & its Absoutly awesome.I started vaping 1-4-11. Anyway , I have the Smok Stik TFV8 Baby Duel Coil Rebuildable Deck..I've been building coils for my Kayfun lite Plus for years..So instead of having to twist 20 coils to figure it out , & wasting a bunch of wire, I figured I'd just ask you guys. I have the Kuro Concept coil jig. But I wanna build 0.25 and 0.35 ohm coils on the TFV8 Rebuildable Deck. What wire should I use ? What size rod ? & How many twists for each build..? Thanks in advance...

 

[zephyr]

You could do 26awg kanthal, 6/5 wraps around 2.5mm bit for 0.35 ohms, that seems like a good starting place

Or a parallel 28awg kanthal 6/5 wraps around a 2.5mm bit for 0.25 ohms

 

[rduncan06]

You could do 26awg kanthal, 6/5 wraps around 2.5mm bit for 0.35 ohms, that seems like a good starting place

Or a parallel 28awg kanthal 6/5 wraps around a 2.5mm bit for 0.25 ohms

Okay , thanks for the reply.

 

[zephyr]

Okay , thanks for the reply.

I made a mistake with the parallel 28 build, I'm not sure it will fit. What guage wire do you use for your kayfun?

 

[rduncan06]

I made a mistake with the parallel 28 build, I'm not sure it will fit. What guage wire do you use for your kayfun?

I think its a 28 gauge build. But its only a single coil ,where as the TFV8 Baby is a duel coil ..Last time I twisted coils for the KayFun , I twisted about 50 at one time ..So I haven't twisted one in quite a while lol..

 

[zephyr]

You could do parallel 28 5/4 wraps around a 3mm bit, that would fit I betcha, be about 0.25 ohms

 

[rduncan06]

You could do parallel 28 5/4 wraps around a 3mm bit, that would fit I betcha, be about 0.25 ohms

Okay thanks..I'll give that a shot..