Need some advice on build for parallel box

[R3alJim Shady]

Okay so I exclusively build with SS316L. I have a set of 26g32g fused claptons in my Goon and I'm getting a pretty slow ramp up time.

I was thinking of going with either twisted or parallel 26g coils. Not sure if one build would heat up faster than another.

I want to build at about .15 ohms or so. I have 24g, 26g, 28g, and 32g 316L wire. Advice is appreciated!

 

[gopher_byrd]

Up your watts or get smaller wire for the Clapton wire. I make my fused with 26/38 and minimal ramp up. The 32 gauge is causing the ramp up time. More metal to heat up.

 

[R3alJim Shady]

Ah, gotcha. 38g is hard to come by locally. Is Unkamen is the best source to find this size?

 

[gopher_byrd]

Where are you located? In the US there are plenty of sources. Lightening Vapes, TempCo industrial, KBeeVapes, and Kidney Puncher are where I buy here. I've not heard of Unkamen.

 

[R3alJim Shady]

Unkamen is a jewelry supplier. It's where I used to buy my titanium. Just bought some off eBay from KBeeVapes. Thanks!

 

[midknight420]

I have an awesome build in my theorem that as a single coil is .24Ω. Would put it at around .12Ω as a dual coil. It is 2x26g twisted/parallel 29g, 6/5 wraps. Could use 32g for parallel and should bring the ohms up just a hair for you. Ramps up fast and a nice warm, but not hot vape.

I'm not crazy, my mother had me tested.

 

[Dutch0hms]

Dual 26SS316L/38Ni80 3mm 6 wrap fused claptons ohms out at 0.15
http://www.wireandstuff.co.uk/ is where i get my 38Ni80.