Hi Vaping Underground members, In this review i take a look at the Feelin Pod Kit from Nevoks. The Feelin Pod Kit was supplied for the purpose of this review by Ivy from Nevoks.
http://www.nevoks.com/products/nevoks-feelin-pod-kit/
Introduction
Nevoks are a relatively new manufacturer being founded in 2019 during the beginnings of the pod/AIO trend so have concentrated on such products. The Feelin is a pod device offering different power settings, different airflow options and the choice of either draw or button activation. Coming in 4 colour options i had a good "feelin" about this one so let's check it out!
___________________________________________________________________
In The Box
Contents:
1* Feelin Device
1* Feelin Empty Pod 2.8ml (2ml TPD)
1* SPL-10 Mesh Coil 0.6 Ohm
1* SPL-10 Mesh Coil 1.0 Ohm
1* Type-C Cable
2* User Manual (English, Chinese)
1* Warranty Card
___________________________________________________________________
Aesthetics and Ergonomics
The Feelin comes in cardboard packaging and on opening i was met by a stealthy cuboid pod device with a tactile rubber like coating. The device is plastic but is made well and with that really nice coating certainly doesn't feel cheap. I received the Black version, it's available in Red, Silver, Blue or Black and all colours look nice in my opinion.
Up top we have a protruding pod giving a 360 degree clear viewing window with a comfortable Black mouthpiece that tapers from both sides as well as front and back. The top section on the mouthpiece has the same rubber like TPE coating as we see covering the device. On the face of the device we have a pill shaped indentation which houses a round concave fire button top and then a vertical column of 3 LED lights beneath, the bottom half of the face has "nevoks" embossed into the surface. On one side we have the airflow inlets at the top and then underneath in a vertical position towards the face we have the Type C USB port with printed charge rate specifications. On the rear towards the bottom we have "FEELIN" printed and printed safety marks on the base.
The device is very comfortable in the hand and can easily slip into a pocket making it ideal for on the go!!!
___________________________________________________________________
Feelin Specs and Features:
Size: 99.5*22*18mm
Materials: PC+ABS
Capacity: 2.8ml (TPD 2ml)
Power Range: 10W-22W
Output: 3.3V-4.2V
Battery: 1000mAh
Charging: Type-C5V/1.5A
Resistance: 0.6 & 1.0 Ohm
3 Power levels
Adjustable airflow
Magnetic pod attachment
Colours: Red, Silver, Blue, Black
___________________________________________________________________
The Pod
The Pod is rectangular with a frosted bottom section and clear main section which protrudes outside the device acting as a 360 degree viewing window. To one side on the lower frosted section so it will need removing from the device to fill we have a silicone flap with attached plug which needs lifting to reveal a very generous fill port. The flap has an arrow showing where to lift and sometimes these flaps can be fiddly to either remove, fix back in position or both but on the Feelin pod it removes and secures with ease! Filling is quick and mess free, the capacity is 2.8ml with the standard pod and 2ml with the TPD version.
Up top we have a comfortable mouthpiece so no drip tip allowing your own to be fitted, it slants inwards both front and back as well as from both sides and the inner bore is suited towards either a loose MTL or RDL draw. Moving to the base we have the cylindrical opening for the coil head to be fitted and a small magnet to each corner.
___________________________________________________________________
The Coil Heads
The coil head just gets press fitted into the pod via the cylindrical opening at it's base.
You receive 2 different coils with the kit none of which are pre-installed and both are SPL Mesh coils which has leak resistant technology. You receive a 1.0ohm coil head with narrow internal bore and is rated between 10w to 13w. The other included coil head is the 0.6ohm which has a wider internal bore but still quite narrow being narrower than most coil heads with a similar resistance, this coil head is rated between 18w to 25w.
___________________________________________________________________
Fitting The Pod
Looking inside the pod bay we can see the Gold plated, spring loaded contacts on a slightly raised surround and to one side the airflow tube leading to the membrane switch. We can also see the 3 airflow holes and a magnet to each corner to line up with the ones on the pod.
The pod fits extremely securely giving no movement whatsoever, to remove it needs gripping then give a strong pull, cracking job!
___________________________________________________________________
The Airflow
On the device one side we have three airflow inlet holes which allows air to get to the base of the pod. It is claimed the device has adjustable airflow but it's actually the pod can be put in either way with one way allowing the air full access to the base of the coil while the other has a protruding section which obstructs the airflow inlets to give a tighter draw, you can restrict even further by covering one or two of the airflow inlet holes with a finger or thumb.
___________________________________________________________________
Review Continued Below:
http://www.nevoks.com/products/nevoks-feelin-pod-kit/
Introduction
Nevoks are a relatively new manufacturer being founded in 2019 during the beginnings of the pod/AIO trend so have concentrated on such products. The Feelin is a pod device offering different power settings, different airflow options and the choice of either draw or button activation. Coming in 4 colour options i had a good "feelin" about this one so let's check it out!
___________________________________________________________________
In The Box
Contents:
1* Feelin Device
1* Feelin Empty Pod 2.8ml (2ml TPD)
1* SPL-10 Mesh Coil 0.6 Ohm
1* SPL-10 Mesh Coil 1.0 Ohm
1* Type-C Cable
2* User Manual (English, Chinese)
1* Warranty Card
___________________________________________________________________
Aesthetics and Ergonomics
The Feelin comes in cardboard packaging and on opening i was met by a stealthy cuboid pod device with a tactile rubber like coating. The device is plastic but is made well and with that really nice coating certainly doesn't feel cheap. I received the Black version, it's available in Red, Silver, Blue or Black and all colours look nice in my opinion.
Up top we have a protruding pod giving a 360 degree clear viewing window with a comfortable Black mouthpiece that tapers from both sides as well as front and back. The top section on the mouthpiece has the same rubber like TPE coating as we see covering the device. On the face of the device we have a pill shaped indentation which houses a round concave fire button top and then a vertical column of 3 LED lights beneath, the bottom half of the face has "nevoks" embossed into the surface. On one side we have the airflow inlets at the top and then underneath in a vertical position towards the face we have the Type C USB port with printed charge rate specifications. On the rear towards the bottom we have "FEELIN" printed and printed safety marks on the base.
The device is very comfortable in the hand and can easily slip into a pocket making it ideal for on the go!!!
___________________________________________________________________
Feelin Specs and Features:
Size: 99.5*22*18mm
Materials: PC+ABS
Capacity: 2.8ml (TPD 2ml)
Power Range: 10W-22W
Output: 3.3V-4.2V
Battery: 1000mAh
Charging: Type-C5V/1.5A
Resistance: 0.6 & 1.0 Ohm
3 Power levels
Adjustable airflow
Magnetic pod attachment
Colours: Red, Silver, Blue, Black
___________________________________________________________________
The Pod
The Pod is rectangular with a frosted bottom section and clear main section which protrudes outside the device acting as a 360 degree viewing window. To one side on the lower frosted section so it will need removing from the device to fill we have a silicone flap with attached plug which needs lifting to reveal a very generous fill port. The flap has an arrow showing where to lift and sometimes these flaps can be fiddly to either remove, fix back in position or both but on the Feelin pod it removes and secures with ease! Filling is quick and mess free, the capacity is 2.8ml with the standard pod and 2ml with the TPD version.
Up top we have a comfortable mouthpiece so no drip tip allowing your own to be fitted, it slants inwards both front and back as well as from both sides and the inner bore is suited towards either a loose MTL or RDL draw. Moving to the base we have the cylindrical opening for the coil head to be fitted and a small magnet to each corner.
___________________________________________________________________
The Coil Heads
The coil head just gets press fitted into the pod via the cylindrical opening at it's base.
You receive 2 different coils with the kit none of which are pre-installed and both are SPL Mesh coils which has leak resistant technology. You receive a 1.0ohm coil head with narrow internal bore and is rated between 10w to 13w. The other included coil head is the 0.6ohm which has a wider internal bore but still quite narrow being narrower than most coil heads with a similar resistance, this coil head is rated between 18w to 25w.
___________________________________________________________________
Fitting The Pod
Looking inside the pod bay we can see the Gold plated, spring loaded contacts on a slightly raised surround and to one side the airflow tube leading to the membrane switch. We can also see the 3 airflow holes and a magnet to each corner to line up with the ones on the pod.
The pod fits extremely securely giving no movement whatsoever, to remove it needs gripping then give a strong pull, cracking job!
___________________________________________________________________
The Airflow
On the device one side we have three airflow inlet holes which allows air to get to the base of the pod. It is claimed the device has adjustable airflow but it's actually the pod can be put in either way with one way allowing the air full access to the base of the coil while the other has a protruding section which obstructs the airflow inlets to give a tighter draw, you can restrict even further by covering one or two of the airflow inlet holes with a finger or thumb.
___________________________________________________________________
Review Continued Below: