False alarm on wanting to sell the tank, I just got frustrated with some things but I am a happy camper after ironing out some Things with it. Sorry about that guys. Ok so here's the deal, I have a IPV D2 D, so that device as many of you know fires ohms as low as 0.2ohms ( right now I don't have any mods other then the IPV D2 , so I plan on something with higher watts then 75 eventually) Anyways when you use all 3 coils in the Turbo tank it becomes .02ohms, when you use 2 coils in the tank it becomes 0.3ohms. Right now I am vaping the turbo with 2 coils and the device is reading 0.31 oh yea in at 65 watts, and it hits really nice with a lot of vapor, air is open. Some advice , make sure you take out the fan, I did, it makes the vapor not even warm and I don't like cold vapor, keep the fan in and there is a air flow near the top also, I only keep that open very slightly, and I keep the bottom airflow wide open like most of the people I know that vape these type of tanks. I will post a cloud chuck video from it if you guys want. Now resistance is fluctuating between 0.31 & .0.32 no big deal right, I mean the IPV d2 fires coils as low as .02 so I am safe right now just using the 2 coils at 0.31. Also will mention that if you only use 1 coil it will be 6ohms or so. I wanted to experiment with and being that you can use all 3 coils in at once ( yes this tank is sextuplet , they give you these little stopped to put in place if you remove a coil. let me tell you guys this thank can handle the power I mean I can tel at 65 watts that I wish I had a mod that went to 120 watts cause it was craving alot more power and I guess this is because it should when using 2 coils at 0.3. And yes I need to get a mod that goes higher then 75watts, but this is what I am working with. so getting back on track here, the initial concern I had when I was testing it with all 3 coils is the manual in the tank says when using all 3 coils the ohms should read at 0.2, but where I got frustrated is my IPV D2 device was reading 0.19 then go back to 0.2, then go back to 0.19 so I was nervous because of the IPV D2 says it will only fire coils down to 0.2, the fact that it was fluctuating down to 0.19 to me is unsafe. So untill I get a mod that can go down to 0.15, then to be safe i will use the 3 coils at 0.31 / 0.32, which like I said is also good at 65 watts. just say the word and I will do a 5 second pull video to show you the cloud production of how good it is.
Sent from my iPhone using Tapatalk
