So I'm not exactly brand new to vaping, I have been Vaping on my HexOhm 2.1 for the past year when the local shop owner got me set up, he gave me a fairly hurried run down on things as he was pretty busy that day (only vape shop in a 50 mile radius in rural Pa will do that).
The run down basically consisted of him figuring out the coils, and telling me to always use seven wraps with the Clapton wire I have pictured, and for the past year that has done very well for me. but as of recently I started to get a little more curious about new RDA's and their set ups and what changes I might need to make, so I set out to educate myself as best as possible.
At the time of his setting things up and telling me that seven wraps around a 30mm post would be good enough I had absolutely no idea what I was doing, but i now understand the the HexOhm 2.1 requires a minimum of 3ohm set up to not damage the chip, the problem, those seven wraps only seems to put out at .29, and increasing the wraps to nine just bumped things up a bit to .35.
Doesn't this meant hen that I have been well under the needed 3Ohm?
Am i missing something here, or just not understanding something correctly?
I haven't experienced any negative effects with this set up once in the past year, and my understanding was continued usage like that below the min 3 would damage the chip, but neither the chip nor my batteries seem to have had so much as a slight issue.
I've tried to use the steam engine site to figure things out, but with my current clapton wire and not having a 100% solid grasp on these things I just couldn't figure out what I was doing
Clearly I am still learning, but I would never trade this box away for another, in the last year it has been nothing but good to me, and stood up to the abuse of me carrying it around and using as my only vape.
Current set up:
HexOhm 2.1
Potentiameter set dependent on the liquid between 50 and 75% no higher or lower
RDA: Velocity Mini(this could be a clone, though I couldn't say, there are few markings on it to identify it.
Wire: Clapton Clapton 24n80/34k
9 wraps around a 30mm post
RDA Ohm tested on a Coil master 512 mini
Batteries: Samsung 18650 25R 2500mAh X2 (Should I be worried they are spying on me? /JK)
I'm hoping I am giving enough detail for some more experienced people can help me out
The run down basically consisted of him figuring out the coils, and telling me to always use seven wraps with the Clapton wire I have pictured, and for the past year that has done very well for me. but as of recently I started to get a little more curious about new RDA's and their set ups and what changes I might need to make, so I set out to educate myself as best as possible.
At the time of his setting things up and telling me that seven wraps around a 30mm post would be good enough I had absolutely no idea what I was doing, but i now understand the the HexOhm 2.1 requires a minimum of 3ohm set up to not damage the chip, the problem, those seven wraps only seems to put out at .29, and increasing the wraps to nine just bumped things up a bit to .35.
Doesn't this meant hen that I have been well under the needed 3Ohm?
Am i missing something here, or just not understanding something correctly?
I haven't experienced any negative effects with this set up once in the past year, and my understanding was continued usage like that below the min 3 would damage the chip, but neither the chip nor my batteries seem to have had so much as a slight issue.
I've tried to use the steam engine site to figure things out, but with my current clapton wire and not having a 100% solid grasp on these things I just couldn't figure out what I was doing
Clearly I am still learning, but I would never trade this box away for another, in the last year it has been nothing but good to me, and stood up to the abuse of me carrying it around and using as my only vape.
Current set up:
HexOhm 2.1
Potentiameter set dependent on the liquid between 50 and 75% no higher or lower
RDA: Velocity Mini(this could be a clone, though I couldn't say, there are few markings on it to identify it.
Wire: Clapton Clapton 24n80/34k
9 wraps around a 30mm post
RDA Ohm tested on a Coil master 512 mini
Batteries: Samsung 18650 25R 2500mAh X2 (Should I be worried they are spying on me? /JK)
I'm hoping I am giving enough detail for some more experienced people can help me out
Last edited: