Oumier White Bone Mini RTA Review by DeucesJack





KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 3 Years
VU Challenge Team
Reviewer
And finally here it is! Same build as described by Deucesjack ... Thanks again !
Simply great flavour and nice clouds, very smooth, amazing build quality and esthetically pleasing.
Worth every cent, quality / price ratio very high, planning on getting some more
Little tip...I found unlike the boreas which pisses everywhere doing this ...when refilling close the juice control....leaving it upright now open the juice control before screwing down the cap. I find sometimes with thicker juice it gets bubble locked if I don't do this.... wicks like a champ after
 

Deucesjack

VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
And finally here it is! Same build as described by Deucesjack ... Thanks again !
Simply great flavour and nice clouds, very smooth, amazing build quality and esthetically pleasing.
Worth every cent, quality / price ratio very high, planning on getting some more
Told you bro, glad you're enjoying it. It truly gives me great pleasure when members here use and have the same experience with my recommendations.

Sent from my GT-N8013 using Tapatalk
 
Last edited:

errevi

Member For 3 Years
Member For 2 Years
Little tip...I found unlike the boreas which pisses everywhere doing this ...when refilling close the juice control....leaving it upright now open the juice control before screwing down the cap. I find sometimes with thicker juice it gets bubble locked if I don't do this.... wicks like a champ after
Thanks KingPin!
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 3 Years
VU Challenge Team
Reviewer
No probs I've used this little tank more than any of my others so far can't get enough of it ...comes to work with me now the lot ...so glad Deuces recommended it to me thanks again buddy
 

brittany741

Member For 2 Years
Member For 1 Year
Thank you for this thorough review! I just placed my order for one, so the wait begins.

What other single coil tanks rival the Serpent Mini in flavor?

I have purchased: Rose v3, Kayfun 5, Ubertoot (leaks like a sieve all over the place), Erlkonigan, Aromamizer Supreme, Hurricane V2, and many others and I simply haven't gotten the results so many others rave about. But I do with the Serpent Mini. The trouble with the Mini is capacity. I vape entirely too much to warrant such a tiny juice capacity. The Mini also produces condensation above the AFC ring and the occasional droplet from the airflow holes, which makes it incompatible with when I do leave the house. I love the Kayfun but I am just not getting the flavor I expected and I've tried many different builds.

Thank you again!
 

Deucesjack

VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Thank you for this thorough review! I just placed my order for one, so the wait begins.

What other single coil tanks rival the Serpent Mini in flavor?

I have purchased: Rose v3, Kayfun 5, Ubertoot (leaks like a sieve all over the place), Erlkonigan, Aromamizer Supreme, Hurricane V2, and many others and I simply haven't gotten the results so many others rave about. But I do with the Serpent Mini. The trouble with the Mini is capacity. I vape entirely too much to warrant such a tiny juice capacity. The Mini also produces condensation above the AFC ring and the occasional droplet from the airflow holes, which makes it incompatible with when I do leave the house. I love the Kayfun but I am just not getting the flavor I expected and I've tried many different builds.

Thank you again!
Thank you for the kind words. I like the Merlin Mini and Ammit a lot as well. My new flavor tank is the Vandyvape Kylin. Review coming soon.

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

Eilchner

Member For 2 Years
Member For 1 Year
Thanks for the great review!

I just got mine today and I have 2 questions:
1. How do you take the tank apart? I wanted to clean it properly, but I can't take it apart in any way.

2. Are the coils that come with the RTA Kanthal, SS, or..?
 

Deucesjack

VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Thanks for the great review!

I just got mine today and I have 2 questions:
1. How do you take the tank apart? I wanted to clean it properly, but I can't take it apart in any way.

2. Are the coils that come with the RTA Kanthal, SS, or..?
Pull off the drip tip.

Take off the top cap. It screws off like a regular RTA.

Unscrew the base.

Whenever I get coils and the material isn't specified I always assume they are kanthal and run said coils in power mode only.

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

Eilchner

Member For 2 Years
Member For 1 Year
Pull off the drip tip.

Take off the top cap. It screws off like a regular RTA.

Unscrew the base.

Whenever I get coils and the material isn't specified I always assume they are kanthal and run said coils in power mode only.

Sent from my SAMSUNG-SM-G900A using Tapatalk
Thanks for the quick reply.
I think i wasnt precise. I've done that and I'm left with the chamber in the glass tank. Is there any way to separate those?
 

Deucesjack

VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Thanks for the quick reply.
I think i wasnt precise. I've done that and I'm left with the chamber in the glass tank. Is there any way to separate those?
Sure, they should just twist off like the rest of the tank. You may need to use rubber gloves or a vape band for grip. Sometimes I use a needle nose pliers. I insert the tips into the juice ports, grab the base and twist. If you do that be careful not to damage the juice ports.

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

Eilchner

Member For 2 Years
Member For 1 Year
Sure, they should just twist off like the rest of the tank. You may need to use rubber gloves or a vape band for grip. Sometimes I use a needle nose pliers. I insert the tips into the juice ports, grab the base and twist. If you do that be careful not to damage the juice ports.

Sent from my SAMSUNG-SM-G900A using Tapatalk
Sorry for the fuss, I got it now. I just didn't suspect it would need so much force to get it open. Thanks.
Off to build it then :)
 

Deucesjack

VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Sorry for the fuss, I got it now. I just didn't suspect it would need so much force to get it open. Thanks.
Off to build it then :)
Glad I could help. Enjoy!

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 3 Years
VU Challenge Team
Reviewer
Watch those pesky o rings when you take it apart note where everyone is as you go there's a lot of them and they are easy to lose!
 

errevi

Member For 3 Years
Member For 2 Years
Yes you can open that also, but pay attention and be extra gentle trying to open the chamber unscrewing the top (where you refill) from the base (where the chamber is) you can break the glass of the chamber very easily.
Done once, never did that again, I just open the cap, separate the chamber from the deck and rinse with hot water
 

Eilchner

Member For 2 Years
Member For 1 Year
Watch those pesky o rings when you take it apart note where everyone is as you go there's a lot of them and they are easy to lose!
I noticed it when I was taking it apart- orings flying everywhere! Luckily, none of them got lost and all are back in place.
Yes you can open that also, but pay attention and be extra gentle trying to open the chamber unscrewing the top (where you refill) from the base (where the chamber is) you can break the glass of the chamber very easily.
Done once, never did that again, I just open the cap, separate the chamber from the deck and rinse with hot water
I was very careful about it, didn't squeeze the glass too hard. I know that you can clean it without taking it apart, but it's much more convenient and easier to dry for me that way.
 
Hi, I just join vapingunderground and read deucejack review here, seems promising RTA but how's the flavor comparing to Merlin Mini or Kylin RTA? I like merlin mini due to the tight draw (I'm using the smallest restrictor) and I just tried friend's kylin and I kinda like and seem don't mind with the air flow on kylin
 

iVapeDIY

Bronze Contributor
Member For 2 Years
I bought this single coil tank on Black Friday from fasttech.com for $15.
Glad I got my WBM early ... now, out-of-stock everywhere ... remaining stock is $40 (USD) :eek:

Hi, I just join vapingunderground and read deucejack review here, seems promising RTA but how's the flavor comparing to Merlin Mini or Kylin RTA? I like merlin mini due to the tight draw (I'm using the smallest restrictor) and I just tried friend's kylin and I kinda like and seem don't mind with the air flow on kylin
Yes, WBM is MTL compatible and has similar flavor chasing properties. Also, found a drip tip that fit the following (for standardized temperature) and compared them (all are similar to Merlin Mini) ...
  • Oumier WhiteBone Mini
  • Wotofo Serpent Mini
  • UD Goblin Mini V3
http://vapingunderground.com/thread...a-good-mtl-flavor-chaser.334629/#post-1785844
 

Puff

Gold Contributor
Member For 4 Years
I keep forgetting about this RTA. I want one of these.


Sent from my LG-V930 using Tapatalk
 

VU Sponsors

Top