Out of Mods

[pescadore]

All my regulated box mods are broken and all I have left is a Cronus single battery Mech Mod. Is it dangerous to run my Smok TFV 4 Mini tank on this mod. I don't want to blow up and have no experience with Mech Mods.

 

[nightshard]

It depends on the resistance of your head and the type of battery used in the mech.
Give us more info to get a proper answer.

 

[SirRichardRear]

All my regulated box mods are broken and all I have left is a Cronus single battery Mech Mod. Is it dangerous to run my Smok TFV 4 Mini tank on this mod. I don't want to blow up and have no experience with Mech Mods.

how did you break all you regulated mods? which ones were they? are you in the market for a new one?
with that said it depends on which coil you are using and what battery. Looks like they have a 1.8ohm coil which should be safe with pretty much any battery (2.3 amps) and a .3 ohm coil which I'd recommend using a 20 amp battery (it draws 14 amps) like an LG Hg2, or samsung 30Q. They also have an RBA deck but doesn't sound like building is your thing yet. They also have a 1.5 ohm, .35ohm and .4ohm coil options which will also be fine on the 20 amp battery. Don't use the Ti or Ni coils on it those are for temp control only

 

[pescadore]

It depends on the resistance of your head and the type of battery used in the mech.
Give us more info to get a proper answer.

.4 resistance with single Clapton coil on RBA deck for TFV4 Mini. I am using 3.7v 3000 mAh battery

 

[pescadore]

.4 resistance with single Clapton coil on RBA deck for TFV4 Mini. I am using 3.7v 3000 mAh battery

Battery is the brown LG Hg2

 

[SirRichardRear]

Battery is the brown LG Hg2

.4 ohms would draw about 10.5 amps and thats a good 20 amp battery so you'll be fine using that

 

[nightshard]

With the HG2 which is 20A it should be just fine, with 0.4 ohm coil you are going to push 10. 5A and 44W max.
If you want to get higher wattage (which i guess you would) you should build lower.
0.21 is the minimum recommended for a 20A battery with 20A 84W max.

 

[pescadore]

.4 ohms would draw about 10.5 amps and thats a good 20 amp battery so you'll be fine using that

Thanks ... all the research that I could find told me that but I just wanted to double check from experienced Mech Mod users. I am sending my HCigar VT133 back to Evolv for repair. I think the board is bad. Just needed something to use tell I got it back. Thanks again.

 

[r055co]

The Cronus has a 510 pin and with your LG you're fine. With a 0.4 ohm coil that should provide a decent Vape.

Watch out, you might get seduced by Mech's, I sure in the hell did

 

[jonathanmark1401]

With a HG2 which is 20A it should be just fine, with 0.4 ohm coil you are going to push 10. 5A and 44W max.
If you want to get higher wattage (which i guess you would) you should build lower.
0.21 is the minimum recommended for a 20A battery with 20A 84W max.

I love living life on the edge with my 25r lol


Sent from my iPhone using Tapatalk

 

[yasaboss]

I love living life on the edge with my 25r lol


Sent from my iPhone using Tapatalk

Better than browns, and just as good or better the the vtc5a