Become a Patron!

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
Purchased from subtanksupply

Steam Crave Aromamizer Titan RDTA

Azs7zGE.jpg

dirvL1b.jpg

PlIApYG.jpg

FdCFdBj.jpg

EDKq4r2.jpg

qYxrOA1.jpg

F19MeGE.jpg

U5zXHEG.jpg


User Manual:
7NSt0gH.jpg

KNBH5rE.jpg

WzfCRpR.jpg

rRYOLkC.jpg

7X8vbXu.jpg

a2tu0IY.jpg

9LNxEX6.jpg

4pRefAS.jpg

E8jWULH.jpg

xNBaJag.jpg

YDaSR66.jpg

uPoFe0X.jpg
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
Drip Tip:
(Delrin)
14.5mm tall
18mm OD
15mm ID tapering down to 9.5mm ID
Will stand 9.55mm above the top cap
hrWHlT0.jpg

7GYrjyr.jpg

wdd3x2E.jpg

DyAsNfE.jpg


Top Cap:
6.8mm tall
41mm OD
12.75mm ID @ drip tip insert
Printed on top is "SteamCrave Aromamizer Titan RDTA"
There are 3 O-rings.
1 for drip tip
1 around outer ring to seal against outer filling port.
1 to seal inside of upper ring.
D4clKKc.jpg

ut7hrMH.jpg

wMRXr61.jpg

QDJDXpO.jpg


Filling Port:
11mm tall
41mm OD
There are 2 bean shaped juice fill holes measuring 26.5mm X 5.5mm
A raised ring where the top cap threads into measuring 22mm OD X 17.6mm ID and 7mm tall.
On the bottom there is a large O-ring that seals to the glass and a smaller O-ring that seals to the chimney.
On this piece the chimney ID is 10mm ID.
Fz38Dql.jpg

GXkTquO.jpg

ofJU6Zy.jpg

8U0aCxW.jpg


Glass:
28.9mm tall X 40.1mm OD
J1cWbeF.jpg


Chimney:
30.2mm tall
14.7mm OD at top and bottom knurling
12mm OD at center
10mm ID
Says "SteamCrave" and has an image of the logo etched in.
b6iSkjO.jpg

AUMFjE5.jpg

37cE9Ur.jpg


Chamber:
20.6mm tall
41mm OD where glass sets in.
38.7mm OD @ air flow
29.5mm OD where base threads on.
In this channel is a large O-ring.
There are two juice flow channels measuring 15.15mm X 2.65mm that go all the way through.
2 air flow holes measuring 11.5mm X 4.25mm with a screen like opening.
3 O-rings;
Two of them seal @ top and bottom of AFC, the other seals where juice flow ring connects.
While looking at it form the top there is a raised dome like covering that is 30mm OD and the coils would rest right under this.
While looking at it from the bottom there is a 28mm ID X 16.8mm deep cavity with a dome-ish shaped top that houses the build deck.
qEBNErA.jpg

KV8myT2.jpg

OSp3TH8.jpg

OBRfaOm.jpg
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
Air Flow Control (AFC) Ring:
9mm tall
41mm OD
There are 2 larger 4mm X 11.8mm air holes with an extension that is 2mm X 11.8mm.
Additionally there are 2 holes that are 5.75mm X 4mm and 2 holes measuring 4mm round.
BdJrH8n.jpg

3i1TxHc.jpg


Juice Flow Ring:
6mm tall
41.2mm OD
There are 4 etched images that show lock and unlock to indicate if the juice flow is open of closed.
Between each is 3 grooves.
On the inner diameter of the ring are 4 notches to provide full stop locks for the juice control.
*NOTE: Be careful with these O-rings as they are thin.
They'll seal everything up just fine but when dry fitting the juice flow ring back on I managed to cut the very bottom O-ring.
This can be prevented by getting your O-rings wet.
Juice works well for this.
K3YARBb.jpg

8Kp1hXR.jpg

3JFXobT.jpg


Base:
8.08mm tall
40.9mm OD with heavy knurling,
5.3mm deep
There is a large O-ring around the threading that connects it to the housing and a small O-ring that seals where the 510 of the deck go through the bottom.
There are 4 air flow holes measuring 10.5mm X 2mm.
On either side of the air flow holes there are the blocks that create the full stops.
On the bottom is says "Designed by BJ" and has a serial number.
uIYYuz5.jpg

zSn1TVs.jpg

fBquT35.jpg

rh933gb.jpg


Build Deck:
With pre-installed Postless option.
(shown in instructions as being called Standard Build Deck #1 on page 5)
16.15mm tall
27.8mm OD while measuring between the tabs, 28.6mm OD @ the tabs.
There are 2 juice flow channels measuring 9.9mm X 2mm
The ring that seals to the O-ring in the center of the base is 12mm OD
From the top of the standard build option posts to the inside bottom of the deck is 6.6mm
Distance between outside post holes is 14mm
Distance between center post holes (if you chose to use triple coils) 10.4mm
Post holes in this section are 2.5mm ID
wZXQKZd.jpg

3lXL8x6.jpg

P7Zgeyk.jpg

C2SOJ5X.jpg

epTMNnD.jpg


The build:
yi4v09L.jpg

NKwLuoU.jpg

0Jcz246.jpg

mAsn1dv.jpg

oKpjmbI.jpg

nfkEAmd.jpg
 
Last edited:

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
lQq2dVc.jpg

WalYqUn.jpg

1sTe7wU.jpg

Dctlj3d.jpg

hJ6lEkk.jpg

ESwMtjO.jpg

kjnaU76.jpg

1VvABTF.jpg


With Velocity style posts:
From the top of the velocity build option posts to the inside bottom of the deck is 12.3mm
Distance between post holes is 10.5mm
Post holes in this section are 2.7mm ID
sUegO9w.jpg

RqJbTQq.jpg

a3KU1Mt.jpg

YNQvqzJ.jpg

agfISol.jpg

qhwJgOP.jpg


The build:
D7IqY9s.jpg

qQPap6x.jpg

4QowFf8.jpg

PrjVVld.jpg

xmJRsqe.jpg

w9fveS8.jpg
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
ova42B1.jpg

48tHAJE.jpg

lfiMApd.jpg

cbgVSaB.jpg

tekZzdV.jpg

2IhVBOO.jpg

V5aFh7n.jpg

HoqKaGo.jpg

wqdKiwh.jpg

uKejREe.jpg

YBA8UJC.jpg

snA6MC5.jpg

UePfKA0.jpg

elrO9gN.jpg


With Series style posts:
24mm tall
From the top of the series build option posts to the inside bottom of the deck is 14.5mm
Distance between post holes is 10.5mm
Post holes in this section are 2.7mm ID
Xo4xYsE.jpg

PhmsfT1.jpg

2PKOwHs.jpg

ZN9W96d.jpg

1qVvWy4.jpg


The build:
zhdnVfR.jpg
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
dOixjqd.jpg

h9hSpwk.jpg

Mdlf9BH.jpg

QlLVE95.jpg

naEoBbO.jpg

zy5C7Bn.jpg

YFt2m6b.jpg

DHPvnnG.jpg

XeLxJ4B.jpg

L4g7r0e.jpg

hyQKpNC.jpg

6zl3j9V.jpg

7tMMxut.jpg


Large Spare Glass (28ml):
29.1mm tall X 39.88mm OD
Inside:
Spare Bag #1:
Extra black and white O-rings
Black and stainless screws.
Spare Bag #2:
Series post (including insert posts) and Velocity posts.
Cj6kLPQ.jpg

0Fiee4m.jpg


Small Spare Glass (18ml) #1:
17mm tall X 40.1mm OD
Inside:
Vape band and extra drip tip with same measurements are pre-installed one.
Only difference is this one is Ultem.
7Ep2Tx7.jpg

qdFzzxj.jpg

TNvlAzg.jpg

b4zanEA.jpg


Small Spare Glass (18ml) #2:
17mm tall X 40.1mm OD
Inside:
Foam insert holding the shorter chimney for the smaller glass sections.
M6G5L4u.jpg
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
Short Chimney:
18.2mm tall
14.7mm OD at top and bottom knurling
12mm OD at center
10mm ID
Says "SteamCrave" and has the logo etched in.
8vclAL2.jpg

tzVkCxW.jpg


There is also an allen key in the box.

Full assembled this massive tank is 75.35mm tall.
Excluding drip tip AND 510 it is 61.35mm tall.
2Tqh8PD.jpg


Compared next to the Steam Crave Aromamizer Plus with 20ml tank extension on Ijoy Captain PD270:
Xu6CxkU.jpg

k4dec6V.jpg


On the Vaptio N1 Pro (triple coil postless):
CMLOJXK.jpg

VQvStQ4.jpg

jSdEGPC.jpg


on the Ijoy Captian PD270
ZFbBDsw.jpg

Because I could, on the Smok Alien
QDex2XX.jpg


I used 1ml to prime the wicks.
Then I managed to fit an additional 31ml into the tank.

******************************************************************************
Coils used in Series and Standard builds:
(3X26/36SS 4.5mm ID 6 wrap from b_d_builders

Coils used in Velocity build:
(3X26/36SS 4mm ID 6 wrap from b_d_builders
******************************************************************************

I have only managed to find two CONs for this beast;
1. The juice flow control (JFC) and air flow control (AFC) are extremely snug and difficult to open / close.
If you're not careful you could cut an O-ring when assembling the AFC ring.
2. Limited mods that will hold with without overhang.
If you are not picky about that, then this would be an absolutely awesome choice.

However these Titans look awesome on the Laisimo F4
EFenIuA.jpg

rbgWmlZ.jpg

caaQEgI.jpg

PiVmj98.jpg

KgQa53k.jpg

0wijfv4.jpg

yI2tAQa.jpg

AiCFSyG.jpg

jbPF4dN.jpg

8NmNrK3.jpg
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
PROs:
This list is simply too long but I'll mention a few:
3 different build options
Juice capacity
Flavor
Build quality
Machining is clean
Design

This is a massively large tank with plenty of options to build what you want.
Very solid and performs exceptionally well.

Manufacture link:
http://www.steamcrave.com/titan-p00072p1.html

Info per manufacture:
In the box you will find:
1×AromamizerTitan 28ml version whole unit
1×Spare 28ml glass
1×18ml shorty chimney (in spare box)
2×18ml shorty glass(in spare box)
2×Post for Velocity style modular
1×Post for seriesmodular
1×Vape band
1×Ultem drip tip
1×Allen Key
1x Pack of Spare O ring and grub screws

Designed and created by Bj Shi tested by powervapers and modmakers
Innovative Lego modular build deck for postless/Velocity/Series option for endless coil configurations
Juice capacity options 18ml and 28ml with 4.5ml in reservoir for RDA mode
Smooth SteamCrave quality vape experience you know and love in the 41mm format
Titan will give your high powered mods a run for your money!

Manufacture Pics:
732uacD.jpg

B548Ts4.jpg

MdWsaAj.jpg

m23pbOk.jpg

YpaHlC3.jpg

JSThoF1.jpg

Faf1my9.jpg


I purchased all three of mine from the great crew over at subtanksupply.
Here is a link for you to get yours:
https://www.subtanksupply.com/rta-rba-tanks/aromamizer-titan-rdta-by-steam-crave.html
 

VU Sponsors

Top