INTRODUCTION
_____________________________________________________________________________________
_____________________________________________________________________________________
******DISCLAIMER – Mechanical mods are for advanced vapors only. This has the ability to be a series stacked device, which makes this even more fierce. Please have a solid understanding of ohms law, battery safety, and mechanical mod maintenance before using a device like this. ******
Hello Everyone and welcome to Pizza Dave’s Vape Reviews. Today I will be going over the Coilart Mage V2 Stacked Edition mechanical mod. This single or dual-series mechanical mod is compatible with 18650 (via adapter), 20700, or 21700 batteries. It features an auto adjusting fire button, so the button will be flush with the bottom of the device (similar to a Vgod or Karma mech). I will get into more details below, so let’s just dive right in, shall we?
Disclaimer: This device was sent to me by Sourcemore for review.
_____________________________________________________________________________________
WHAT YOU GET
_____________________________________________________________________________________
- Available in black
STOCK SHOT
PACKAGING
UNBOXED
_____________________________________________________________________________________
MOD OVERVIEW
Alright, so what we have here is an entry level mech mod. It has a buyer friendly price point, has the ability to be used as either a single or dual battery device, and for the price, is actually built pretty well. The sections of this mod feel solid, and the knurled design gives this a great feel. The inside of the tube is lined with some sort of plastic, which is there as a safety barrier, should you have some tears in the batteries. I will never suggest running any vaping device with torn wraps but having this protection is a nice feature. Like I said above, this can be used as a single battery mod. In this configuration, it will measure in at roughly 25mm wide and 91mm tall. In stacked mode, it will be roughly 200mm tall, give or take. The kit comes with all of the necessary parts you will need to keep this device running for a long time. It has two series adapters, which are essentially rubber disks with a contact in the center. They can be a bit funky to push into the mod since they have a bit of a vacuum/pressure effect, but they stay firmly in place. It also has two extra springs, one for the fire button, and one for the adjusting ring on the fire button. Both appear to have the same spring tension. The last spare component is a gold-plated contact for the fire button. Out of the box, a silver-plated contact (or some sort of silver metal) is pre-installed in the button. The last bit of parts that come with this are battery adapters for 18650 batteries. Use of 20700 or 21700 batteries require no adapter.
_____________________________________________________________________________________
_____________________________________________________________________________________
HOW IT VAPES
So, what do I think of this device? I have had a handful of mech mods from different brands, but this is my first series mech. Instead of diving head first into stacking, I elected to use this as a single cell mod. My first build was a .15-ohm fused Clapton. It worked as expected, and with a single Samsung 30T, performance was excellent. It felt like it hit really well, and quickly became one of my favorite mechs I have used. My second build was a .13-ohm stapled fused Clapton and performance was great with this as well. I ran this same build on a Plan B Collab box (parallel 21700), and it didn’t hit nearly as hard as the Mage. After dabbling with single battery operation for a while, I did some building for higher resistance and felt it was time to try it stacked. ***Small disclaimer. If using in series, exercise some battery knowledge and use married batteries for safety**** I went for a .30-ohm fused Clapton build in my newly acquired Terk V2 rda. Insert Keanu Reeves saying “Whoa”! The firing of this is downright violent. I totally get why guys love to rock series now, as it is pretty amazing. The vapor production and ramp up is ridiculous. I didn’t run it a lot in this fashion, as it is just too much for me for regular use, but it is definitely fun to play with. Alright, so we know it hits well, but let’s look at some of the other characteristics of the mod. The overall build quality of the mod is well done, but they took some short cuts with the fire button. It is very soft to press and is easily one of the softest mechanical buttons I have used to date. If this were to get set down on an uneven surface where the button could be pressed, the weight of the mod itself will go in and it will fire. This is even worse in stacked mod, as the weight of two 21700s adds some heft to it. I felt much worse when I first got the mod, as the bottom protruded out slightly. I disassembled it to take a look at the springs and inside of the fire button and found that when I reassembled it was flush. I found that the thread on contacts (silver or gold) can come undone slightly and this will make the button stick down. This is something the user will always want to keep tabs on for safety, as once it is snug in place, the bottom of the mod is flush, and the button cannot be pressed by accident as easily.
_____________________________________________________________________________________
PHOTO GALLERY
_____________________________________________________________________________________
_____________________________________________________________________________________
******DISCLAIMER – Mechanical mods are for advanced vapors only. This has the ability to be a series stacked device, which makes this even more fierce. Please have a solid understanding of ohms law, battery safety, and mechanical mod maintenance before using a device like this. ******
Hello Everyone and welcome to Pizza Dave’s Vape Reviews. Today I will be going over the Coilart Mage V2 Stacked Edition mechanical mod. This single or dual-series mechanical mod is compatible with 18650 (via adapter), 20700, or 21700 batteries. It features an auto adjusting fire button, so the button will be flush with the bottom of the device (similar to a Vgod or Karma mech). I will get into more details below, so let’s just dive right in, shall we?
Disclaimer: This device was sent to me by Sourcemore for review.
_____________________________________________________________________________________
WHAT YOU GET
_____________________________________________________________________________________
- Coilart Mage V2 Stacked Edition Mech Mod
- Base Section – For single battery operation
- Stacked Section – For series, stacked operation
- 2 18650 battery sleeves
- 2 Series Discs
- Extra Springs for firing and auto-adjustment
- Gold and Silver button contacts
- Available in black
STOCK SHOT
PACKAGING
UNBOXED
_____________________________________________________________________________________
MOD OVERVIEW
Alright, so what we have here is an entry level mech mod. It has a buyer friendly price point, has the ability to be used as either a single or dual battery device, and for the price, is actually built pretty well. The sections of this mod feel solid, and the knurled design gives this a great feel. The inside of the tube is lined with some sort of plastic, which is there as a safety barrier, should you have some tears in the batteries. I will never suggest running any vaping device with torn wraps but having this protection is a nice feature. Like I said above, this can be used as a single battery mod. In this configuration, it will measure in at roughly 25mm wide and 91mm tall. In stacked mode, it will be roughly 200mm tall, give or take. The kit comes with all of the necessary parts you will need to keep this device running for a long time. It has two series adapters, which are essentially rubber disks with a contact in the center. They can be a bit funky to push into the mod since they have a bit of a vacuum/pressure effect, but they stay firmly in place. It also has two extra springs, one for the fire button, and one for the adjusting ring on the fire button. Both appear to have the same spring tension. The last spare component is a gold-plated contact for the fire button. Out of the box, a silver-plated contact (or some sort of silver metal) is pre-installed in the button. The last bit of parts that come with this are battery adapters for 18650 batteries. Use of 20700 or 21700 batteries require no adapter.
_____________________________________________________________________________________
_____________________________________________________________________________________
HOW IT VAPES
So, what do I think of this device? I have had a handful of mech mods from different brands, but this is my first series mech. Instead of diving head first into stacking, I elected to use this as a single cell mod. My first build was a .15-ohm fused Clapton. It worked as expected, and with a single Samsung 30T, performance was excellent. It felt like it hit really well, and quickly became one of my favorite mechs I have used. My second build was a .13-ohm stapled fused Clapton and performance was great with this as well. I ran this same build on a Plan B Collab box (parallel 21700), and it didn’t hit nearly as hard as the Mage. After dabbling with single battery operation for a while, I did some building for higher resistance and felt it was time to try it stacked. ***Small disclaimer. If using in series, exercise some battery knowledge and use married batteries for safety**** I went for a .30-ohm fused Clapton build in my newly acquired Terk V2 rda. Insert Keanu Reeves saying “Whoa”! The firing of this is downright violent. I totally get why guys love to rock series now, as it is pretty amazing. The vapor production and ramp up is ridiculous. I didn’t run it a lot in this fashion, as it is just too much for me for regular use, but it is definitely fun to play with. Alright, so we know it hits well, but let’s look at some of the other characteristics of the mod. The overall build quality of the mod is well done, but they took some short cuts with the fire button. It is very soft to press and is easily one of the softest mechanical buttons I have used to date. If this were to get set down on an uneven surface where the button could be pressed, the weight of the mod itself will go in and it will fire. This is even worse in stacked mod, as the weight of two 21700s adds some heft to it. I felt much worse when I first got the mod, as the bottom protruded out slightly. I disassembled it to take a look at the springs and inside of the fire button and found that when I reassembled it was flush. I found that the thread on contacts (silver or gold) can come undone slightly and this will make the button stick down. This is something the user will always want to keep tabs on for safety, as once it is snug in place, the bottom of the mod is flush, and the button cannot be pressed by accident as easily.
_____________________________________________________________________________________
PHOTO GALLERY