INTRODUCTION
Hello everyone and welcome to another review by me, Pizza Dave. Today I will be going over the Origin AIO by OXVA. This company has been around for a little while now, and they are known for making AIOs and pod systems. Just a little tidbit of info about this, but the lead designer is the same one that made the Aegis series for Geekvape. I don’t know the backstory as to if he left the company, or if OXVA is a subsidiary company, but that’s just what I am told. Anyways,, so many pod systems hit the market and they don’t have anything new or innovative to offer, that is not the case with the Origin. At first glance, one would assume this has its own battery due to its size. However, this houses an external 18650, which is super impressive. It also has a small display which shows everything you need know, all while maintaining this small frame. Without further adieu, let’s get right to it eh?
This device was sent to me by OXVA for review.
_____________________________________________________________________________________
WHAT YOU GET
Available in a black/red, Brilliant Black (all black), Muzo Green (rainbow), Carbon/Black, and Silver Aurora (my model)
STOCK SHOT
PACKAGING
UNBOXED
_____________________________________________________________________________________
Measurements: 113.5mm x 32.8mm x 23.5mm
Battery: Single 18650
Power Range - 5-40w
Capacity - 3ml
Other features: Adjustable power output, adjustable airflow, RBA available separately.
_____________________________________________________________________________________
FIRST IMPRESSIONS / SUMMARY
Wow, this fits an 18650? Going into it, I knew it handled that battery, but I was super impressed by the size of it in my hand. Along with this slim design comes a solid feel and nice trim as well. My model is Silver Aurora, which essentially has a polished trim with white/blue mixed side panels. Starting at the top, there is a proprietary drip tip which slides over top of a slim stem. It offers a 510-like opening. On one side, there is a viewing window for liquid, three airflow inlets, and their Logo. On the face, there is a recessed fire button, display, adjustment button, and a charge port. Pop on over to the other side, and you’ll find a magnetic battery door with a small slit for removal. This door is held solidly in place with the magnets, and it has no wiggle room. The door feels a bit cheap as it is 100% plastic, but I understand using this for the application. Once the door is opened, there is the pod up top, and 18650 battery tray at the bottom. Let’s get into how to operate and the usage next.
_____________________________________________________________________________________
OPERATION
The Origin is a device which has quite a few features, but still keeps it simple. It has a fire button, screen, and a single button for adjustment. Here are the basics.
That’s about all you need to know to run it. The screen shows battery level, resistance, power setting, and voltage output. It will also notify you when there is a fault. The fire button has an illuminated ring when firing and will flash when there is a fault as well.
_____________________________________________________________________________________
POD / COILS
The origin pod section reminds me of a differently shaped Artery Pal II. They have a small indeed where you pry the pod out of the device. They swivel out of the top section of the device and then are pulled straight out. It has a side flapper for refills, and coils which are inserted through the bottom. The coils thread into an air flow ring for adjustment. Airflow comes in through the side of the device and right into the AFC. Adjusting it can be a pain when inserted, but once set, you won’t need to fiddle any more. Liquid level is viewable through the a cut out on the side of the device, or one could quickly pop open the battery bay for a better look. This system works and keeps things compact, but let’s look at their coils, as this is always the make or break point for pod systems.
.3-ohm UNI mesh coil - I ran this coil at 30w with 6mg liquid. I was actually surprised at how hard this hit, and 6mg was almost too strong. Flavor and vapor on point, and airflow wide open on the AFC is more of a restricted lung than MTL.
.5-ohm UNI mesh coil - I ran this one at 15w with the same 6mg liquid. It was more enjoyable with this coil. I turned the airflow down to ⅓ - ½ and found it to be a nice MTL vape. Flavor is good, vapor is cut back a little, and it would be the coil I would push people towards if they are using this device to quit smoking.
RBA Base - I was sent the RBA to review as well. This kit comes with a ni80 2.5mm spaced round wire coil that comes in at .6-ohms. I pushed the limits on this a little more and went for 20w. It built up the warmth a bit and vapes very well. I enjoy rebuilding and love the longevity one can get out of a device with an RBA. If coils are no longer produced, one can just build their own for a long time, and for cheaper. This RBA isn’t too bad to build either. It has a compact 2 screw design, so one coil leg goes one way and the other in the opposite direction. It has small wicking slots on the sides and not retaining ring, so simply wetting the cotton down and tucking downward holds it in place before you screw the top portion on. It took a little bit of fiddling to get the cotton thinned enough and to the right length, but once set, boom… done. I never had issues with it keeping up at 20w and the performance is solid. Flavor from this isn’t leaps and bounds away form their UNI coils though, so if you like their coils and don’t want to rebuild, you don’t have to opt. for the RBA, I just love the option to have this. Oh… and it comes with a 510 base, so you can build this thing on a regular mod, work out hot spots, and have a stable base to build on.
Since everyone will ask about it, the coil life on these is about the industry average. I used some sweeter liquid and got somewhere around 20-30mls through the coils before they started to get burnt. Nothing crazy, just average.
_____________________________________________________________________________________
PHOTO GALLERY
_____________________________________________________________________________________
Hello everyone and welcome to another review by me, Pizza Dave. Today I will be going over the Origin AIO by OXVA. This company has been around for a little while now, and they are known for making AIOs and pod systems. Just a little tidbit of info about this, but the lead designer is the same one that made the Aegis series for Geekvape. I don’t know the backstory as to if he left the company, or if OXVA is a subsidiary company, but that’s just what I am told. Anyways,, so many pod systems hit the market and they don’t have anything new or innovative to offer, that is not the case with the Origin. At first glance, one would assume this has its own battery due to its size. However, this houses an external 18650, which is super impressive. It also has a small display which shows everything you need know, all while maintaining this small frame. Without further adieu, let’s get right to it eh?
This device was sent to me by OXVA for review.
_____________________________________________________________________________________
WHAT YOU GET
- 1 Origin Device
- 1 3ml pod
- 1 Airflow ring (goes on base of coil)
- 1 .3-ohm UNI mesh coil
- 1 .5-ohm UNI mesh coil
- 1 Micro USB charging cable
- Paperwork
- They also sell an optional RBA base
Available in a black/red, Brilliant Black (all black), Muzo Green (rainbow), Carbon/Black, and Silver Aurora (my model)
STOCK SHOT
PACKAGING
UNBOXED
_____________________________________________________________________________________
Measurements: 113.5mm x 32.8mm x 23.5mm
Battery: Single 18650
Power Range - 5-40w
Capacity - 3ml
Other features: Adjustable power output, adjustable airflow, RBA available separately.
_____________________________________________________________________________________
FIRST IMPRESSIONS / SUMMARY
Wow, this fits an 18650? Going into it, I knew it handled that battery, but I was super impressed by the size of it in my hand. Along with this slim design comes a solid feel and nice trim as well. My model is Silver Aurora, which essentially has a polished trim with white/blue mixed side panels. Starting at the top, there is a proprietary drip tip which slides over top of a slim stem. It offers a 510-like opening. On one side, there is a viewing window for liquid, three airflow inlets, and their Logo. On the face, there is a recessed fire button, display, adjustment button, and a charge port. Pop on over to the other side, and you’ll find a magnetic battery door with a small slit for removal. This door is held solidly in place with the magnets, and it has no wiggle room. The door feels a bit cheap as it is 100% plastic, but I understand using this for the application. Once the door is opened, there is the pod up top, and 18650 battery tray at the bottom. Let’s get into how to operate and the usage next.
_____________________________________________________________________________________
OPERATION
The Origin is a device which has quite a few features, but still keeps it simple. It has a fire button, screen, and a single button for adjustment. Here are the basics.
- 5 clicks of the fire button turns the device on and off
- Pressing the adjustment button raises the wattage in 1-watt increments and it round robins after 40w
- The chip automatically sets a recommended wattage upon insertion, so it’s already in the ballpark when you get started. It also limits the peak wattage based on the resistance, preventing one from going too hot and burning a coil up.
- Pressing the fire button and adjustment button together will lock out the device completely. It will not fire when locked. Press this again to unlock.
That’s about all you need to know to run it. The screen shows battery level, resistance, power setting, and voltage output. It will also notify you when there is a fault. The fire button has an illuminated ring when firing and will flash when there is a fault as well.
_____________________________________________________________________________________
POD / COILS
The origin pod section reminds me of a differently shaped Artery Pal II. They have a small indeed where you pry the pod out of the device. They swivel out of the top section of the device and then are pulled straight out. It has a side flapper for refills, and coils which are inserted through the bottom. The coils thread into an air flow ring for adjustment. Airflow comes in through the side of the device and right into the AFC. Adjusting it can be a pain when inserted, but once set, you won’t need to fiddle any more. Liquid level is viewable through the a cut out on the side of the device, or one could quickly pop open the battery bay for a better look. This system works and keeps things compact, but let’s look at their coils, as this is always the make or break point for pod systems.
.3-ohm UNI mesh coil - I ran this coil at 30w with 6mg liquid. I was actually surprised at how hard this hit, and 6mg was almost too strong. Flavor and vapor on point, and airflow wide open on the AFC is more of a restricted lung than MTL.
.5-ohm UNI mesh coil - I ran this one at 15w with the same 6mg liquid. It was more enjoyable with this coil. I turned the airflow down to ⅓ - ½ and found it to be a nice MTL vape. Flavor is good, vapor is cut back a little, and it would be the coil I would push people towards if they are using this device to quit smoking.
RBA Base - I was sent the RBA to review as well. This kit comes with a ni80 2.5mm spaced round wire coil that comes in at .6-ohms. I pushed the limits on this a little more and went for 20w. It built up the warmth a bit and vapes very well. I enjoy rebuilding and love the longevity one can get out of a device with an RBA. If coils are no longer produced, one can just build their own for a long time, and for cheaper. This RBA isn’t too bad to build either. It has a compact 2 screw design, so one coil leg goes one way and the other in the opposite direction. It has small wicking slots on the sides and not retaining ring, so simply wetting the cotton down and tucking downward holds it in place before you screw the top portion on. It took a little bit of fiddling to get the cotton thinned enough and to the right length, but once set, boom… done. I never had issues with it keeping up at 20w and the performance is solid. Flavor from this isn’t leaps and bounds away form their UNI coils though, so if you like their coils and don’t want to rebuild, you don’t have to opt. for the RBA, I just love the option to have this. Oh… and it comes with a 510 base, so you can build this thing on a regular mod, work out hot spots, and have a stable base to build on.
Since everyone will ask about it, the coil life on these is about the industry average. I used some sweeter liquid and got somewhere around 20-30mls through the coils before they started to get burnt. Nothing crazy, just average.
_____________________________________________________________________________________
PHOTO GALLERY
_____________________________________________________________________________________