Become a Patron!
Post pictures of your setups!
- Thread starter Mjjmfa
- Start date
SkullKandy Posidon DNA 75C back from repairs!
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
Got a Catfish with the same colors.....SkullKandy Posidon DNA 75C back from repairs!
Sent from my XT1585 using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Hope you guys love a bit of work put into a setup...
My Polished End Green Defiant DS with Polished Reload BF
Took about 7 hours to do those caps and get them as mirrored as they are, will be doing the body next...just need more time and high grit paper.
How I polish:
I start with 180 and remove the coating/deep scratches and make sure all my sanding is perfectly even, then repeat with 220, then repeat with 400, then repeat with 550, then repeat with 800, then repeat with 1000, then repeat with 1500, then repeat with 2000, then repeat with 3000, then repeat with 5000 and then buff it all with my Dremel and Metal Polish, followed by Polishing Compound. Took about 6 hours. I drew all that out on purpose to give an understanding of how much is involved....but the results are SPECTACULAR!
My Polished End Green Defiant DS with Polished Reload BF
Took about 7 hours to do those caps and get them as mirrored as they are, will be doing the body next...just need more time and high grit paper.
How I polish:
I start with 180 and remove the coating/deep scratches and make sure all my sanding is perfectly even, then repeat with 220, then repeat with 400, then repeat with 550, then repeat with 800, then repeat with 1000, then repeat with 1500, then repeat with 2000, then repeat with 3000, then repeat with 5000 and then buff it all with my Dremel and Metal Polish, followed by Polishing Compound. Took about 6 hours. I drew all that out on purpose to give an understanding of how much is involved....but the results are SPECTACULAR!
I do too. Utilitarian with a touch of finesse.
My work selection, because I am very indecisive.
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
The Yihi and The 30mm Modfather Voltrove.
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
You may have talked me into it - I have a brand new purple one I could do something similar to.Hope you guys love a bit of work put into a setup...
My Polished End Green Defiant DS with Polished Reload BF
Took about 7 hours to do those caps and get them as mirrored as they are, will be doing the body next...just need more time and high grit paper.
How I polish:
I start with 180 and remove the coating/deep scratches and make sure all my sanding is perfectly even, then repeat with 220, then repeat with 400, then repeat with 550, then repeat with 800, then repeat with 1000, then repeat with 1500, then repeat with 2000, then repeat with 3000, then repeat with 5000 and then buff it all with my Dremel and Metal Polish, followed by Polishing Compound. Took about 6 hours. I drew all that out on purpose to give an understanding of how much is involved....but the results are SPECTACULAR!
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
I'll have to see what Mothers will do to it. I know it will take the finish off of some of the older anodized Hexohms.
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Dammit Ray! This is all your fault. And it's a low serial number, too.
Just kiddin' buddy - I'll polish the body and leave the top and bottom purple, and the "lip" where the squonk bottle hole is. I'll use a gentler method around the S/N and DD text to try and keep them intact. It'd be great if they could hold the purple, but I'm not counting on it.
Just kiddin' buddy - I'll polish the body and leave the top and bottom purple, and the "lip" where the squonk bottle hole is. I'll use a gentler method around the S/N and DD text to try and keep them intact. It'd be great if they could hold the purple, but I'm not counting on it.
Dammit Ray! This is all your fault. And it's a low serial number, too.
Just kiddin' buddy - I'll polish the body and leave the top and bottom purple, and the "lip" where the squonk bottle hole is. I'll use a gentler method around the S/N and DD text to try and keep them intact. It'd be great if they could hold the purple, but I'm not counting on it.
I wouldnt use the dremel for anything more than removing the coating, dont waste your own time and mod by forcing you to use more time than already required. The reason I did it all by hand was to ensure that all the surfaces were perfectly level and smooth, Ive never fancied power tools for auto-body because they always seem to make surfaces turn out wavy.
Grab some 180 grit and wrap it around a credit card and do it by hand or duct tape the paper to a table top and rub the mod over it in a "X" pattern.
Starting Finish:
Removed Clear Coat:
Then at 2000 Grit:
Then I finished the wetsanding and buffed it with the dremel:
If you do continue to use the dremel, drop the rough wheels and use those Green rubber bits, that way it removes everything off the surface but it wont remove the metal itself, its what I use on trigger groups when Im gunsmithing.
I really hope to see that thing finished! I am doing that new Trinity 20700 Tube and the DS Body here shortly...
Last edited:
Lookin good, Ray....!I wouldnt use the dremel for anything more than removing the coating, dont waste your own time and mod by forcing you to use more time than already required. The reason I did it all by hand was to ensure that all the surfaces were perfectly level and smooth, Ive never fancied power tools for auto-body because they always seem to make surfaces turn out wavy.
Grab some 180 grit and wrap it around a credit card and do it by hand or duct tape the paper to a table top and rub the mod over it in a "X" pattern.
Starting Finish:
Removed Clear Coat:
Then at 2000 Grit:
Then I finished the wetsanding and buffed it with the dremel:
If you do continue to use the dremel, drop the rough wheels and use those Green rubber bits, that way it removes everything off the surface but it wont remove the metal itself, its what I use on trigger groups when Im gunsmithing.
I really hope to see that thing finished! I am doing that new Trinity 20700 Tube and the DS Body here shortly...
Today a squonker..... 
fish with a nipple lover tip........
Sent from my Pixel 2 XL using Tapatalk
fish with a nipple lover tip........
Sent from my Pixel 2 XL using Tapatalk
I didn't know you squonked. Lol hard to fit a 41mm bottle in there.Today a squonker.....
Sent from my Pixel 2 XL using Tapatalk
Sent from my LM-Q610(FGN) using Tapatalk
I was about to comment something similar about him.
Only a couple..... I over squeeze and flood and tip over and pocket leaking and forget to squeeze and dry hit and one battery..... I recently found better ways to go 10 to 12 hours a day non stop vaping........
Sent from my Pixel 2 XL using Tapatalk
Today Big Daddy Dong......
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Love the Releaux... I was thinking the FDA was going to abolish vaping..... So we bought like (10) for the bunker....... Ha.....ha
Sent from my Pixel 2 XL using Tapatalk
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
You could always use the Brass or SS Brushes for the Dremel and give it a REAL brushed finish. If you ever want it finished I can offer to for some shecklesYeah, it actually dug too deep. So I'll just keep it as a distressed look.
Broscience Vapes : Model 1550 BSV
400 watts
4s Lipo
Built in balanced charger
Replacement panels
Fat Daddy's 510
Aircraft Aluminum
Evolve 250C
Sent from my Pixel 2 XL using Tapatalk
400 watts
4s Lipo
Built in balanced charger
Replacement panels
Fat Daddy's 510
Aircraft Aluminum
Evolve 250C
Sent from my Pixel 2 XL using Tapatalk
Last edited:
Setup for life!!
Loving this set up..... Like a kid with a new toy.....
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Sexy.....
Sent from my Pixel 2 XL using Tapatalk
Goldfinger sexy......
Paranormal 250c with dotmod24 w/ bubble glass
Sent from my iPhone using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
The pic doesn’t do it justice.
Definitely confirms that I need a gold rda for that mod though
I think the wood panels, like nothing bright like a dark rosewood and the gold rda will make it pop..... Make it classy.....The pic doesn’t do it justice.
Definitely confirms that I need a gold rda for that mod though
Sent from my Pixel 2 XL using Tapatalk
Something like this color........
Last edited:
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
That is really nice!I think the wood panels, like nothing bright like a dark rosewood and the gold rda will make it pop..... Make it classy.....
Sent from my Pixel 2 XL using Tapatalk
Something like this color........
The Rda is green.... So anything looks good with that color.....
I'm just throwing out some ideas....
You have to create your own mod..... Your going to vape it...... Ha .....
Sent from my Pixel 2 XL using Tapatalk
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
I knew I liked you...
Paranormal 250c with dotmod24 w/ bubble glass
Sent from my iPhone using Tapatalk
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
It’s STILL, hands down, the best rta ive ever used. I have the reload as well; but, i prefer the airflow, and flavor from the dotmod.I knew I liked you...
Today trick vaping with the Limitless plus...
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Today built and hit that Glaz.....
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
How is it compared to the Plus?Today built and hit that Glaz.....
Sent from my Pixel 2 XL using Tapatalk
Sent from my XT1585 using Tapatalk
Sorry but more clouds and taste better for starting ..... It is a flavorful tank..... The only thing that has me thinking is it holds 7ml of juice.....
The Aromamizer plus holds 10ml ....... But give me week and I'll know
% which is the best....The Aromamizer takes a day or 2 to really start tasting good...... The Glaz I mean your first hit is like BAM....... It surprised me for sure......and after 2 or 3 hits .... Condensed.....
Sent from my Pixel 2 XL using Tapatalk
You will like it ....
Sent from my Pixel 2 XL using Tapatalk
Nothing compares to The Titan..... It's on a league of it's own !!!!!!!!!
Lmfao the fish...
Sent from my XT1585 using Tapatalk
You will like it ....
Sent from my Pixel 2 XL using Tapatalk
Nothing compares to The Titan..... It's on a league of it's own !!!!!!!!!
Sent from my XT1585 using Tapatalk
Just ordered a Therion BF from Dhgate. What are the odds I get it within a month shipped epacket?
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
I would say the odds of not getting it at all are higher......