Become a Patron!
Post your builds
- Thread starter Vape_geek
- Start date
Nope
How is that zerker? I've been considering it's MTL RDA brother.Basic Berserker build.
7 wraps 26 gauge nichrome 80 spaced. 2.5 mm ID. Cotton bacon prime, Vango VCT 50mg salt nic.
Vapes great. Wow what a hard hitter. Yummy.
Sent from my SM-G935W8 using Tapatalk
The berserker is awesome on flavour, it has a tight draw, when you wick it right. This thing is phenomenal . The down side. Wick too much, it dries out, wick too little it floods. It takes a few tries to get it right. I dont know about the MTL rda. This is the mtl rta original. I dont use it often, but when I do. And the wick is correct. It is amazing.
Sent from my SM-G935W8 using Tapatalk
Good to know. I love a good tiiiggghhht draw, if that's what I'm hankerin for. And the wicking ... sounds a lot like my Smok rta. If the wicking isn't just right your screwed
That is massive!Dual 7 wrap Aliens in the Apocalypse RDA I got from 315jessie
Sent from my SM-G965U using Tapatalk
Sent from my SM-G935W8 using Tapatalk
Modification of my usual fralien to try out increased resistance.
Enigma! 2x28g, 12x.3r, 36g (28g decore)
3mm id, .10 ohms, all SS
3mm id, .10 ohms, all SS
Looks tasty. I’m vaping some sfcs now too, that enigma was a cotton burner.
It's a .24 ohms build. 7.5 parallel wraps at 4mm ID, 29/36 Ni80.
Clean!!!!
Thank you, thank you for saying 7.5 wraps instead of 8 - I'm struggling lately with being correct vs. saying it how most others say it
Woo!
52g Framed Staples....I tried going 54g, I got them coiled and then I noticed a ton of screw ups looking under a lens....So I dropped down 2 Gauges and tried again.
Installed in the VXVTech X RDA (its like a Mini Version of the Dead Rabbit RDA)
Specs: 5ply .3R N90/28g SS/52g N80
It doesnt look as tiny when the magnifications is so close...but 42g with the same magnification looks massive, Ill leave a shot to compare the 52g and 42g with.
Remember those staples in the center are 46g....and look how large those babies look in comparison. I think the size of the Framed Staples also throws off the "feel", they are about the same size as the staples in the middle of the wires just above...
Installed in the VXVTech X RDA (its like a Mini Version of the Dead Rabbit RDA)
Specs: 5ply .3R N90/28g SS/52g N80
It doesnt look as tiny when the magnifications is so close...but 42g with the same magnification looks massive, Ill leave a shot to compare the 52g and 42g with.
Remember those staples in the center are 46g....and look how large those babies look in comparison. I think the size of the Framed Staples also throws off the "feel", they are about the same size as the staples in the middle of the wires just above...
Beautiful!! I've always loved the way tightly fused superfine get's all splotchy during coloring.52g Framed Staples....I tried going 54g, I got them coiled and then I noticed a ton of screw ups looking under a lens....So I dropped down 2 Gauges and tried again.
Installed in the VXVTech X RDA (its like a Mini Version of the Dead Rabbit RDA)
Specs: 5ply .3R N90/28g SS/52g N80
It doesnt look as tiny when the magnifications is so close...but 42g with the same magnification looks massive, Ill leave a shot to compare the 52g and 42g with.
Remember those staples in the center are 46g....and look how large those babies look in comparison. I think the size of the Framed Staples also throws off the "feel", they are about the same size as the staples in the middle of the wires just above...
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
I did some 48g plain staples last night with 12 ply 0.2 ribbon. It was late (I was tired, but wanted to make them) and the wraps didn't come out very consistent. Should have gone to bed and waited until today to make them. But that's okay, they were made for performance, not coil porn. I made 3 of them for a triple coil install in the Titan RTA using the postless deck going on the Titan PWM.
Last edited:
It is a pain in the ass to get it clean, I kept having the wire back on itself repeatedly. Out of a 12" length those coils were all I got out of it cleanly and Ive been working for a week on this stuff, I havent dared to vape any of the high gauge builds....I keep thinking of the wrap burning off and going into my lungs
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Gotta have pics right?
Like I said, lots of inconsistencies because I was tired. Heck, one of 'em I even wrapped wonky.
Like I said, lots of inconsistencies because I was tired. Heck, one of 'em I even wrapped wonky.
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
For some reason, I can work with 48g a lot easier than 50g. It's like once the wire hits 50g it loses it's cohesion for me. I have 52 and 54, but those snap if I even look at them. I need a smoother work surface before I try using them again. Maybe pick up a small sheet of plexiglass or something similar at Home Depot.It is a pain in the ass to get it clean, I kept having the wire back on itself repeatedly. Out of a 12" length those coils were all I got out of it cleanly and Ive been working for a week on this stuff, I havent dared to vape any of the high gauge builds....I keep thinking of the wrap burning off and going into my lungs
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Here's a better pic using the Nikon with the Sigma macro lens (the others are with my phone). Still haven't learned the proper F-Stop settings for a better depth of field.
Nice series build!
Great work man! I found that when I built the enigma it vaped in very similar fashion to that of a sumo wrestler’s asshole. They are terrific to look at but they burn cotton for sure.Enigma! 2x28g, 12x.3r, 36g (28g decore)
3mm id, .10 ohms, all SS
Such beautiful Color my friend!
Great binding Meg! If I had to take a wild guess I’d say you used 46g. Looks perfect!
Hey Raymo. What would you say 52g framed staples vape like in comparison to let’s say 40g framed staples? Its amazing you can use the 52g without breaking it!52g Framed Staples....I tried going 54g, I got them coiled and then I noticed a ton of screw ups looking under a lens....So I dropped down 2 Gauges and tried again.
Installed in the VXVTech X RDA (its like a Mini Version of the Dead Rabbit RDA)
Specs: 5ply .3R N90/28g SS/52g N80
It doesnt look as tiny when the magnifications is so close...but 42g with the same magnification looks massive, Ill leave a shot to compare the 52g and 42g with.
Remember those staples in the center are 46g....and look how large those babies look in comparison. I think the size of the Framed Staples also throws off the "feel", they are about the same size as the staples in the middle of the wires just above...
Great work man! I found that when I built the enigma it vaped in very similar fashion to that of a sumo wrestler’s asshole. They are terrific to look at but they burn cotton for sure.
Ahh...uhhmm...I tried to click Like, I really did lmao
Great binding Meg! If I had to take a wild guess I’d say you used 46g. Looks perfect!
Yep, every day!
Clicking is hard work. Mistakes are bound to happen
Clicking is hard work. Mistakes are bound to happen
I was hovering there, but "sumo wrestler asshole, nice to look at" kept running through my mind
Here's a better pic using the Nikon with the Sigma macro lens (the others are with my phone). Still haven't learned the proper F-Stop settings for a better depth of field.
For more stuff in focus use a larger number Fstop, the detail is less but you will have more in view per shot. I use a lower number (6-8 Fstop) and shoot more for stacking. I tried 33 Fstop a while ago for a macro shot and I got it all in focus, but the lighting on the image was very dark even with ISO400 and the setting before BULB in Shutter Speed....it wasnt as nice as F14 and 6 pictures stacked.
I really want to get some 57g from Kingorchid and made a simple 2 core SFC....thats my end game with these high gauge stand offs on IG. One high gauge build to rule them all
@Shredtravolta I personally wouldnt vape anything with wrap higher than 46g, as I said before...its a health risk IMO
Last edited:
Parallel SFCs, (2) 2x28g/36g
All SS ~4mm id, 3.5 wraps, .16 ohms
All SS ~4mm id, 3.5 wraps, .16 ohms
ooOOOoo dem's puuurdy!!Parallel SFCs, (2) 2x28g/36g
All SS ~4mm id, 3.5 wraps, .16 ohms
Let me tell you a story ...
A long time ago in a galaxy far far away ... Shit no that's not right ...
When I jumped into building a few months ago I signed up for instagram to get inspiration and learn from others. One of the first builders I found to follow was a man called @snappy_vapes (now @snappy_builds). He was always encouraging to me, as I found most people in the building community are. One day he posted this RAD coil. I had no clue what it was or what it was called ... but I thought, "When I can do that ... I'll have 'made it' as a builder!" Well folks ... today is that day!! I present to you ... a ribbon stitched hedgehog
It's not quite what I want. I would prefer some .2 ribbon, which I don't have. And the decore is a smidge big for the fraple under it. But hot damn this is a sentimental occasion for me
A long time ago in a galaxy far far away ... Shit no that's not right ...
When I jumped into building a few months ago I signed up for instagram to get inspiration and learn from others. One of the first builders I found to follow was a man called @snappy_vapes (now @snappy_builds). He was always encouraging to me, as I found most people in the building community are. One day he posted this RAD coil. I had no clue what it was or what it was called ... but I thought, "When I can do that ... I'll have 'made it' as a builder!" Well folks ... today is that day!! I present to you ... a ribbon stitched hedgehog
It's not quite what I want. I would prefer some .2 ribbon, which I don't have. And the decore is a smidge big for the fraple under it. But hot damn this is a sentimental occasion for me
Let me tell you a story ...
A long time ago in a galaxy far far away ... Shit no that's not right ...
When I jumped into building a few months ago I signed up for instagram to get inspiration and learn from others. One of the first builders I found to follow was a man called @snappy_vapes (now @snappy_builds). He was always encouraging to me, as I found most people in the building community are. One day he posted this RAD coil. I had no clue what it was or what it was called ... but I thought, "When I can do that ... I'll have 'made it' as a builder!" Well folks ... today is that day!! I present to you ... a ribbon stitched hedgehog
View attachment 120200
It's not quite what I want. I would prefer some .2 ribbon, which I don't have. And the decore is a smidge big for the fraple under it. But hot damn this is a sentimental occasion for me
Whoaas, yep, you made it! :0
It is a pain in the ass to get it clean, I kept having the wire back on itself repeatedly. Out of a 12" length those coils were all I got out of it cleanly and Ive been working for a week on this stuff, I havent dared to vape any of the high gauge builds....I keep thinking of the wrap burning off and going into my lungs
Just got some 50g and 52g on the way ...I like this challenge!
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Let me tell you a story ...
A long time ago in a galaxy far far away ... Shit no that's not right ...
When I jumped into building a few months ago I signed up for instagram to get inspiration and learn from others. One of the first builders I found to follow was a man called @snappy_vapes (now @snappy_builds). He was always encouraging to me, as I found most people in the building community are. One day he posted this RAD coil. I had no clue what it was or what it was called ... but I thought, "When I can do that ... I'll have 'made it' as a builder!" Well folks ... today is that day!! I present to you ... a ribbon stitched hedgehog
View attachment 120200
It's not quite what I want. I would prefer some .2 ribbon, which I don't have. And the decore is a smidge big for the fraple under it. But hot damn this is a sentimental occasion for me
Fucking awesome congrats mate!
Thanks!! I don't know if I've made it or not. It's just kind of a goal/milestone thing that I've been looking forward to for a while now.
I would love to get in on the superfine stuff. But I'm barely comfy with 42 yet. Give me some time and I'll work my way up there with you guys. In the mean time I'll sit back and watch the show!
Thank you sir! The fact that you said f**k is actually kind of heartwarming
28ga x 4/36ga Quad Core SS316 Alien
6 wrap
3mm
Dual Coil @ .1 ohms
In a copper 24mm Goon
On a copper Sub Ohm Innovations
Sub Zero X
I bought a replacement hybrid cap and button in black to trick out the copper a little bit.
I did NOT wind the alien wire. That came from Advanced Vape Supply.
6 wrap
3mm
Dual Coil @ .1 ohms
In a copper 24mm Goon
On a copper Sub Ohm Innovations
Sub Zero X
I bought a replacement hybrid cap and button in black to trick out the copper a little bit.
I did NOT wind the alien wire. That came from Advanced Vape Supply.
Last edited:
Oh man I didn't mean to imply that at all, I was just worried AVS was fucking up and that your life was in danger
Welcome to Post Your Builds, btw!
best place on the forum