I run a parallel 10 wrap 26 ga SS316l 3mm coil in mine.
Fits perfectly and vapes nice on the pico.
Fits perfectly and vapes nice on the pico.
Been vapin 3+ years only had one mod break after I dropped it.
Been vapin over 2.5 years on the same Kanger Kbox mini.
Vapin around a year on a Kanger dripbox 160.
No 'up in smok' mods though
That's one of reasons I got funnily enough, I use my pico as my on the go setup.I run a parallel 10 wrap 26 ga SS316l 3mm coil in mine.
Fits perfectly and vapes nice on the pico.
Yes and I promise it’s all I’ll use. Just. Make. Them. Stop!!!!Skt didn’t get postless decks ....do you get them now skt?
Pico and wasp is my out and about vape. regulated squonkers are for my desk and recliner side table.That's one of reasons I got funnily enough, I use my pico as my on the go setup.
I hear you and I myself am set for a bit aside from a few more things I'd like to get.On cost of vaping as a smoking alternative and a hobby.
Been vaping over 3 years now.
Have spent total maybe 1/3 on what i would have spent on $4/pack cigs.
Am stocked up to where I would not HAVE to buy anything till next year. And then just PG/VG and flavoring and maybe another spool or wire and some cotton. Sometime within 2 years more batteries as they wear out...
I used to smoke 3 packs a day. Do glad I found vaping!I hear you and I myself am set for a bit aside from a few more things I'd like to get.
When I quit smoking it was costing me $12 for 3 cartons worth of ciggy tubes (600) and $22 for a bag of tobacco that was the equivalent of 3 cartons. That would last me about 3 weeks. That's about as cheap as the ciggy habit could get for me.
From what I understand now, a pack of Marlboro/Camel is $10! That would be $100 per week to slowly kill myself.
I see no problem with people spending money on not only a healthier alternative to Cigs but a hobby that gives them something to do and stimulates the brain cells. Spending money on mods and Atty's is still cheaper depending on how heavily one smoked in comparison to how much they spend on vape gear.
Pico and Subtank Mini for me atmPico and wasp is my out and about vape. regulated squonkers are for my desk and recliner side table.
My other main vape. Subtank mini V2 RBA on a Kanger Kbox mini.Pico and Subtank Mini for me atm
I was about 1.5 packs a day but that doubled when I stocked my fridge with beer on the weekends. I can honestly say I don't miss those days at all.I used to smoke 3 packs a day. Do glad I found vaping!
I'll be honest i still sometimes have a cig with a beerI was about 1.5 packs a day but that doubled when I stocked my fridge with beer on the weekends. I can honestly say I don't miss those days at all.
I understand. The two really are perfect for each other.I'll be honest i still sometimes have a cig with a beer
I have 7 wasps
Lmao I feel for you, I've ordered one too and my GF is going mad at me "why did you order 4 of them" but your gonna love the Wasp. I tried one a couple months back and kept trying not to buy one and caved.Well after reading all the praise for the wasp I’m going to have to get one now. Just so you all know I’m going to blame all of you for making me get it when I get the look from the wife.
In the immortal words of Socrates, “ I drank what?!”
I shared one with my wife at the beach this summer. She rarely smokes, maybe once a year. It wasn’t horrible, wasn’t great either. I definitely didn’t wake up wanting one.I'll be honest i still sometimes have a cig with a beer
I've noticed I can't stand the smell of a cigarette anymore. We've all been there I'm sure. Someone walks in after smoking and we are like man you smell good. Yeah not anymore for me.I shared one with my wife at the beach this summer. She rarely smokes, maybe once a year. It wasn’t horrible, wasn’t great either. I definitely didn’t wake up wanting one.
At least they are cheap.Well after reading all the praise for the wasp I’m going to have to get one now. Just so you all know I’m going to blame all of you for making me get it when I get the look from the wife.
In the immortal words of Socrates, “ I drank what?!”
My Smok Alien lasted about 6 months before acting up. Wasn't a fan..Lol I’m not a fan of the smok alien honestly...I rocked a 3 year old sigeli 150tc for 3 years lol. It was a beast. Had been through hell and back and still worked. My brother in law has it now and still works like a dream
I'm vaping on my almost 2 year old DB160 right now. Paint flaked off long ago, pretty beat up looking even with a wrap, but still vapes strong. I'm using a Velocity clone with BF pin with a glass barrel. It's an old setup, but I still love it, something about that glass barrel.I use wasps on mine now.
Just recently bought a 3rd DB160 for a little over $20.
Still using my first one.
The 22 mm Goon clone works fine on them too.
when I get a new vape stash mod I will use it for a week or two to be sure it works fine and then put it away.
Paint came off the squonk side of my DB160 but control side is still pristine.I'm vaping on my almost 2 year old DB160 right now. Paint flaked off long ago, pretty beat up looking even with a wrap, but still vapes strong. I'm using a Velocity clone with BF pin with a glass barrel. It's an old setup, but I still love it, something about that glass barrel.
My Smok Alien lasted about 6 months before acting up. Wasn't a fan..
Right you are. I even tried all the hacks to fix, adjusting the spring, yada yada, no dice. And upgrading firmware, forget it!I guess I’ve had good luck. I have two aliens that I’ve had over a year. Never had any problems with either of them.
But they aren’t my favorites because they are terrible at reading the right ohms on my tanks and the batteries don’t last as long as other mods I have.
In the immortal words of Socrates, “ I drank what?!”
Right you are. I even tried all the hacks to fix, adjusting the spring, yada yada, no dice. And upgrading firmware, forget it!
Sent from my SM-N950U using Tapatalk
Lol that dude is a know it all cock sucker. I've tried to be nice to the little bitch but I'm going to just keep it real. You Don baldy are a fucktard. Suck a dick and choke on cum.What the fuck? What is wrong with you?
I need more airflow. If that gave just a tiny bit more airflow it would without a doubt be perfect.Like the DPRO by Coilart, thing is cute! View attachment 103265
And they got the screws going the right direction, so flat wire will stay flat and not twist. I need to either get a small squonker mod for it or trade it though, I don't have a dripper's patience.
I need more airflow. If that gave just a tiny bit more airflow it would without a doubt be perfect.
I used to be a junkie. I'll never ever let some dbag like him make me upset I've accomplished so much.
If you really wanna see him get mad talk about how contact coils are better than spaced. He will blow a gasket.
Sent from my Z981 using Tapatalk
Lol that dude is a know it all cock sucker. I've tried to be nice to the little bitch but I'm going to just keep it real. You Don baldy are a fucktard. Suck a dick and choke on cum.
It's not postless it's got a fucking block for a post ya dumb fuck. It works like a postless but it's not. Not like the dpro or the pulse. Those are true postless build that have nothing in the dripper just coils and cotton.
Don baldy your just mad at life. I'm sober as can be and enjoying my life I'm tired of how you like to make people feel bad. Your the king douchebag go back to ecf where your little following is. We don't need you. All you do is copy paste info. Your a poser. Know it all little douchebag.
Sent from my Z981 using Tapatalk
Major fail.Dude - it was Don29Palms that hurled the insult, not DonBaldly
Why have you quoted Brad he's done fuck all wrong to you. Crawl back into your hole you fucking dickLol that dude is a know it all cock sucker. I've tried to be nice to the little bitch but I'm going to just keep it real. You Don baldy are a fucktard. Suck a dick and choke on cum.
It's not postless it's got a fucking block for a post ya dumb fuck. It works like a postless but it's not. Not like the dpro or the pulse. Those are true postless build that have nothing in the dripper just coils and cotton.
Don baldy your just mad at life. I'm sober as can be and enjoying my life I'm tired of how you like to make people feel bad. Your the king douchebag go back to ecf where your little following is. We don't need you. All you do is copy paste info. Your a poser. Know it all little douchebag.
Sent from my Z981 using Tapatalk
Back too topic though postless decks actually ain't half bad. You don't have to worry about what size of coil you can fit in!New movie coming out...Fantastic Postless Decks and How to Build Them.
I have yet to build on one but I've seen reviews and definitely agree. Some of the Atty's I've seen can take some rather big coils.Back too topic though postless decks actually ain't half bad. You don't have to worry about what size of coil you can fit in!
I use a Kylin and Reload clone an have had zero leaks.I have yet to build on one but I've seen reviews and definitely agree. Some of the Atty's I've seen can take some rather big coils.
Any leaking issues with postless decks? My preference is single coil builds and a month ago I had a choice between getting a 22mm single coil pulse rda or a 22mm Goon. Despite my preference for single coil I chose the Goon. Not a fan of VV and didn't trust that juice wouldn't seep through the screws and leak.
Postless decks have actually become my favourite deck option. I don't understand how people find them so difficult.Wow, didn't realize the postless deck was such a hot button issue!
I absolutely love my goon and am so happy with that choice despite being a dual coil setup. The flavor on that little rda is Fucking awesome.I use a Kylin and Reload clone an have had zero leaks.
I don't own the Pulse 22 so couldn't comment but the Goon is a damn good choice. I don't use RDA'S much now but they are alot less fiddly than RTA'S for sure. I'd definitely recommend picking up a Reload or Reload clone. I've just ordered an authentic but they are always out of stock. It's been months till I found one!
Based on the reviews I've watched I would agree. Cutting the legs and positioning the coil to the airflow slots doesn't look difficult at all. Especially with all that space to work with on the deck.Postless decks have actually become my favourite deck option. I don't understand how people find them so difficult.
Easier decks I've ever worked with but if you get a deck with postless an get stuck just message me I own quite a few postless deck RTA'S an RDA'S.Based on the reviews I've watched I would agree. Cutting the legs and positioning the coil to the airflow slots doesn't look difficult at all. Especially with all that space to work with on the deck.
Not knocking those that may have struggled so please don't take offense.