Become a Patron!

PROJECT SUB-OHM™ "BRIEFCASE" TC 50 WATT BOX MOD - $53.99 + FS

VaporJoe

_ the end has arrived _
Staff member
VU Owner
VU Senior Leadership
VU Senior Administrator
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
ECF Refugee
Vape Media
Member For 5 Years
Reddit Exile
VU Patreon



Introducing the Project Sub-Ohm™ "briefcase" TC Temperature Control Edition 50 Watt Box Mod by SMY, featuring a dual wattage and temperature control system, a revamped sliding ball locking door, and the capability to fire down to 0.1 ohms! The Project Sub-Ohm™ "briefcase" TC Temperature Control Edition features a newly integrated Temperature Control module, allowing for the use and adjustment from 200 to 600 degrees Fahrenheit while also including a Wattage system that can range from 5 to 50 watts! A bright, LED screen showcases useful data such as overtime protection settings, puff statistics, battery life, output current, output voltage, resistance, temperature protection and vaping timer. Manufactured out of Zinc Alloy, the Project Sub-Ohm™ "briefcase" TC has been slimmed down from it's predecessors, and features a heavy duty construction. On the back face, the iconic Project Sub-Ohm™ logo is engraved on the back plate, contrasting with the darker tones of the device. Each device is serialized exclusively with a Project Sub-Ohm™ run. The Temperature Control Revolution is here. The Project Sub-Ohm™ "briefcase" TC Temperature Control Edition 50 Watt Box Mod by SMY.


Product Features:

  • Temperature Control Module
    • 200 to 600 degrees Fahrenheit
  • 5 to 50 watt range
  • 0.1 to 3.0 ohm resistance range
  • LED Screen
  • Uses single 18650 IMR battery
  • USB Charging Port
  • Manufactured out of Zinc Alloy with a Gunmetal Finish
  • SS 510 Fittings with Spring-Loaded Positive Pin
  • Iconic Project Sub-Ohm™ Engravings
  • Individually Serialized
  • Short circuit, reverse polarity, temperature, and low voltage protection

Product Dimensions:

  • 49mm x 99mm x 28mm

Product Includes:

  • Project Sub-Ohm™ "briefcase" TC Temperature Control Edition 50 Watt Box Mod by SMY
  • One Microfiber Cleaning Cloth
  • One USB Charger
  • User Manual

WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $53.99
ALL ORDERS GET A FREE 10ML BOTTLE OF MILLENNIUM JUICE

FREE SHIPPING



yEfy0sCjBkM


Click here to get more information on this deal....
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Nice mod to bad it's not that good from the reviews I've seen. Evic vt or ipv4 is a better choice
 

JColt

Bronze Contributor
Member For 5 Years
Nice mod to bad it's not that good from the reviews I've seen. Evic vt or ipv4 is a better choice

Where are reviews? I have only seen the regular 60 watt reviews but none on this one.
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
That dude on youtube djlsb vape has a review it. The chip is a little off on temp but it works
 

JColt

Bronze Contributor
Member For 5 Years
Thanks will look at it. So far I have 3 temp mods and all 3 require different settings.
 

JColt

Bronze Contributor
Member For 5 Years
Just watched vid. Like that you just have to change temp and no joules adjust. He mentions using good quality nickel wire. Mine should be here Fri so I can play with this weekend.
 

nabibrian

VU Donator
Gold Contributor
Member For 4 Years
Just got mine today.
So far, a great device.
I will have to give more feedback at a later time once I have used it a bit more.
 

JColt

Bronze Contributor
Member For 5 Years
Using mine right now. Nice and heavy and feels solid. Easy menu. Looks nice. Looks awesome with kanger subtank 25mm on it. Set temp, no joules or wattage to muck with in Temp mode.
 
Last edited:

nabibrian

VU Donator
Gold Contributor
Member For 4 Years
OK, so at first this was an awesome device.
Now... I am having some serious issues that is making me want to throw this thing in the river.

As soon as I power it on, it detects the atty then I set the watts.
I take 1-2 5 second puffs and then it no longer detects an atty on the device.
So I have to go through a whole series of processes just to get it to read the atty again then I have to set the watts again just to get another 1-2 puffs only to go through the same thing over again.

I read a few reviews on VaporDNA about the same issue and now when I go back to the site to read these reviews, the reviews are magically no longer there. Very frustrating!
I have sent their customer service an email. I will wait to see what they say.

So far, a very faulty device. Very disappointed!!
 

JColt

Bronze Contributor
Member For 5 Years
Did you go into settings and change auto lock time and shut down time? Both are set for like 3 min's. I change mine to 30 min autolock and 60 shutdown
 

nabibrian

VU Donator
Gold Contributor
Member For 4 Years
You think this is the problem?
I will have to try that. I sure hope that is the issue.
Thanks for the reply. I hope it is as simple as that because I really want to like this briefcase, I really do.
 

JColt

Bronze Contributor
Member For 5 Years
Yeah mine shut down several times in first hour I was playing with it. Those 2 settings are real low default. After I changed I went through the rest of battery and half way through another with no problems.
 

nabibrian

VU Donator
Gold Contributor
Member For 4 Years
No same issue, Screen Display reads: CHECKED ATOMIZER
having to go through this all over again....aaaaaaarrrrrgggghhh!
 

JColt

Bronze Contributor
Member For 5 Years
Try a different atty and or a different battery. Make sure not in Temp Mode if not using nickle?
 

nabibrian

VU Donator
Gold Contributor
Member For 4 Years
I am using new batteries and I will try a different atty and yeah, I made sure not to be in temp mode. This is really frustrating.
 

VU Sponsors

Top