Straydonkey
Member For 3 Years
Become a Patron!
RDA coil
- Thread starter Straydonkey
- Start date
I like 3x28/38 or 36ga(clapton wrap). 5 wraps around a 3mm jig. Im not familiar with that RDA. If it's dual coil I use fused claptons 2x28/38.
I like to vape between 40-60W myself. Check out Wire Optim or Advanced Vape Supply for SS316L.
I like to vape between 40-60W myself. Check out Wire Optim or Advanced Vape Supply for SS316L.
@Just Frank already gave you great advice. That's a 22mm dual coil rda, correct? If so, you'll want something like this https://wireoptim.com/clapton-wire-coils-fused-2x-core-ss-316l-316l-10-pack/
You'll save quite a bit by just buying a spool of SS clapton wire and winding your own coils around a 2mm or 2.5mm bit.
You'll save quite a bit by just buying a spool of SS clapton wire and winding your own coils around a 2mm or 2.5mm bit.
Straydonkey
Member For 3 Years
I
'm looking more towards premade/ prewrapped rda coils
You could look for Wotofo (N80)or Coilology brand coils.
Wrapping wire around a little screwdriver isn't hard though. You'd get way more coils for your money.
And soon people will need to start making their own coils want to or not.
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
I've been using mostly these N80 aliens but the fused clapton's cost less by quite a bit.
The N80 alien's in 6w/3id in dual come out to .2 - .22
The SS aliens in 6w/3id in dual are about .16
For both, the legs are long enough to add a wrap unless the atty needs really long legs. Or remove a wrap and even 4id can be pulled down to 2 or 2.5id on a jig.
So there's a good range of size and resistance.
50% off w/code 50off. Shipping is <$4. Free at $30 I think.
www.advancedvapesupply.com
www.advancedvapesupply.com
www.advancedvapesupply.com
Are you running that 'sometimes 80w' on your Solo?
The N80 alien's in 6w/3id in dual come out to .2 - .22
The SS aliens in 6w/3id in dual are about .16
For both, the legs are long enough to add a wrap unless the atty needs really long legs. Or remove a wrap and even 4id can be pulled down to 2 or 2.5id on a jig.
So there's a good range of size and resistance.
50% off w/code 50off. Shipping is <$4. Free at $30 I think.
Nichrome 80 Coils and Wire
www.advancedvapesupply.com
4 Pack Alien Coils 316L SS (28gx3/36g)
Four Alien Clapton Coils made with our 316L SS for use in TC or wattage mode. 3 x 28g core wires, wrapped with 36g. The wrap wire comes from a de-cored clapton and is then re-wrapped over these 3 core wires to create the wave effect you see. This is what sets this coil apart from a 3 core fused...
www.advancedvapesupply.com
Pre Made SS Coils
Are you running that 'sometimes 80w' on your Solo?
Straydonkey
Member For 3 Years
I m
ight give it a shot. Just kinda want to be sure of what I am doing,
80 watts very rarelyI've been using mostly these N80 aliens but the fused clapton's cost less by quite a bit.
The N80 alien's in 6w/3id in dual come out to .2 - .22
The SS aliens in 6w/3id in dual are about .16
For both, the legs are long enough to add a wrap unless the atty needs really long legs. Or remove a wrap and even 4id can be pulled down to 2 or 2.5id on a jig.
So there's a good range of size and resistance.
50% off w/code 50off. Shipping is <$4. Free at $30 I think.
Nichrome 80 Coils and Wire
4 Pack Alien Coils 316L SS (28gx3/36g)
Four Alien Clapton Coils made with our 316L SS for use in TC or wattage mode. 3 x 28g core wires, wrapped with 36g. The wrap wire comes from a de-cored clapton and is then re-wrapped over these 3 core wires to create the wave effect you see. This is what sets this coil apart from a 3 core fused...Pre Made SS Coils
Are you running that 'sometimes 80w' on your Solo?
Straydonkey
Member For 3 Years
T
Thank you for info
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
This is why I asked about battery, but maybe your 80w is on another mod?
Straydonkey
Member For 3 Years
Got my solo I think from eight vape, not sure it's been a while. and yes my solo goes up to 100w
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
It's single 18650 right? so your running a 30A Samsung 20S, or a 25A Molicel P26A, or ? For your 80w....
Straydonkey
Member For 3 Years
Straydonkey
Member For 3 Years
No problem, these batteries work just fine. I also have a Laisimo l1 and use the same batteries
nadalama
Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
I know I'm probably outnumbered here, but that's nothing new. 
I took a look at the Cloudscape RDA, it looks pretty small and low-profile, and if I were deciding on coils to put into it, I'd get a pair of 0.6 ohm N80 single-core Claptons. I think if you get much heavier than that, the cap of that RDA is going to be so hot it will be uncomfortable.
Link: https://wireoptim.com/clapton-wire-coils-single-core-n80-n80-10-pack/
You'd select options (1) 36 N80/26 N80 single core, (2) 2.5mm, and (3) either 5 or 6 wraps. Those coils at 5 wraps would be approximately 0.546 ohms per coil, 0.27 ohms for the two; or at 6 wraps, 0.647 per coil, 0.32 ohms for the two.
Now let me get the heck out of here before I get pummeled with rotten tomatoes. lol
I took a look at the Cloudscape RDA, it looks pretty small and low-profile, and if I were deciding on coils to put into it, I'd get a pair of 0.6 ohm N80 single-core Claptons. I think if you get much heavier than that, the cap of that RDA is going to be so hot it will be uncomfortable.Link: https://wireoptim.com/clapton-wire-coils-single-core-n80-n80-10-pack/
You'd select options (1) 36 N80/26 N80 single core, (2) 2.5mm, and (3) either 5 or 6 wraps. Those coils at 5 wraps would be approximately 0.546 ohms per coil, 0.27 ohms for the two; or at 6 wraps, 0.647 per coil, 0.32 ohms for the two.
Now let me get the heck out of here before I get pummeled with rotten tomatoes. lol
Straydonkey
Member For 3 Years
lol ok, thank you