Hello! I am new here but have done alot of research and attempted many solutions with no resolve.
Basically I have the reuleaux dna200 and it works great! But as of late when I leave it sitting and idle for about 20m or so it won't fire back on. This started happening after I used Escribe to attempt a custom theme, which it was fine, then I did a full factory reset and hard reboot.
Then later it turned off wouldn't turn on, took out batteries put back in didn't work, I plugged in a micro USB and it came back on, but it came back on with my old settings before the factory reset and I was highly confused.
Now it does it every20m or so after not using it, using it it's fine, but I leave it idle and it just turns off, I basically "jump start it" with a micro usb to get it working.
Attempted fully draining batteries, using the recovery recharge in escribe then doing factory reset/hard reboot and vice versa.
The mod still registers in Escribe even with the batteries out which means the boards good, and it charges fine while plugged in and works fine just like it goes idle for so long it just shuts off and no amount of clicks or combinations fix it. Has to be "jump started" everytime.
Anyone have ANY insight on this? maybe batteries are faulty? maybe my firmware is messed up now? I attempted full factory resettings then updating firmware/not updating and still nothing.
Please looking for ANY solutions to this problem its quite annoying.
Thank you ahead of time
"TLDR: rxdna200 after idling for 20m or so turns off wont turn back on unless micro usb is plugged in then turns on and works"
Basically I have the reuleaux dna200 and it works great! But as of late when I leave it sitting and idle for about 20m or so it won't fire back on. This started happening after I used Escribe to attempt a custom theme, which it was fine, then I did a full factory reset and hard reboot.
Then later it turned off wouldn't turn on, took out batteries put back in didn't work, I plugged in a micro USB and it came back on, but it came back on with my old settings before the factory reset and I was highly confused.
Now it does it every20m or so after not using it, using it it's fine, but I leave it idle and it just turns off, I basically "jump start it" with a micro usb to get it working.
Attempted fully draining batteries, using the recovery recharge in escribe then doing factory reset/hard reboot and vice versa.
The mod still registers in Escribe even with the batteries out which means the boards good, and it charges fine while plugged in and works fine just like it goes idle for so long it just shuts off and no amount of clicks or combinations fix it. Has to be "jump started" everytime.
Anyone have ANY insight on this? maybe batteries are faulty? maybe my firmware is messed up now? I attempted full factory resettings then updating firmware/not updating and still nothing.
Please looking for ANY solutions to this problem its quite annoying.
Thank you ahead of time
"TLDR: rxdna200 after idling for 20m or so turns off wont turn back on unless micro usb is plugged in then turns on and works"
