series vs parallel

[Alienmane]

So I have a tuglyfe parallel unreg box mod, I put a 5 wrap 22 gauge kanthal on the, but it just doesn't seem to be pushing as much as the same building would in my mech tube mod, is their any reason to, like a hardware issue? And what, if I were to get a series box would it push more power than my parallel?

 

[Alienmane]

It* build*

 

[StereoFreeze]

Short answer is yes, a series mod will hit way harder because it combines the voltage of both batteries. That being said, you have to build differently for a series box .5ohms or above.

 

[Alienmane]

I was told for alot of vape on the parallel I should build parallel coil wraps, do you know any other builds that would produce a lot of vapor?

 

[ej1024]

Series -DOUBLE THE VOLTS
PARALLEL- doubles the MAH and it increase AMPS...



VAPE IT

 

[ej1024]

Parallel are preferred unregulated box mods, especially for super subohm ing ,it's all about the AMPERAGE


VAPE IT

 

[SgtRock]

I'm running dual parallel 26ga Ni80 coils (7/6 3.5mm @~.2) in a velocity on my parallel box and it will chuck it out there for sure.

Same coils with 24ga Ni80 will of course put out more but it also ups the heat (and lowers the ohms). I prefer building with the 26.

I have run a lot of coils with 22 ga Ni80 and it's ok for single coils in an RTA (IMO) but for dual coils I'm not a fan.

 

[r055co]

Parallel = build low, I build around 0.2
Series = build high, I build between 0.8-1.0

I really enjoy fused Clapton's around 1.0 on my Noisy Cricket.

Sent from my Nexus 6 using Tapatalk