Become a Patron!
Show Us your custom Made Mod's
- Thread starter DireHavok
- Start date
Wow, some gorgeous work there. Particularly like the ellipse shaped ones. All made by you? Any more links?
Was wanting to turn my old gameboy color in to box mod could anyone pm me suggestions such as which batteries to use etc
Taajsgpm
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
VapeTechnologies
VapeTechnologies LLC Advanced Custom Boxes
VU Donator
Member For 4 Years
Member For 3 Years
Member For 2 Years
Unlisted Vendor
Oh hey
some seriously skilled individuals up in here
heres one im working on now
some seriously skilled individuals up in here
heres one im working on now
I make the NES mods all the time for people. The Wii one is new and I'm almost done. Wish I had pictures of my other one... ill make a new one so I dont spoil the surprise.
Crap, I had the whole build posted and kept getting error messages.
Custom built SX350J Vapor Flask anyway.
Custom built SX350J Vapor Flask anyway.
A couple of random builds I've done
Nice to see some of the mods on here, beautiful work
Nice to see some of the mods on here, beautiful work
Not sure if this is the right sub-forum but anyways....I've been wanting to build a custom regulated box mod for some time and I want to go ahead and pull the trigger. My question is where is a good place to find the materials I need (box, 510 connection, buttons etc)
Any information or links would be greatly appreciated, thanks!
Any information or links would be greatly appreciated, thanks!
http://vapingunderground.com/threads/basic-mosfet-wiring.2361/
This thread has alot of good info on making boxes
This thread has alot of good info on making boxes
Thank you, that's just what I was looking for.
I love the wood one. Do you can sell any boxes?Just an idea I had for a DNA30 (actual evolv) chip I had and $2.60 worth of scrap plexiglass.
I present Crapbox ver 2
Size comparison next to a Fasttech clone
Do you like the homemade battery connectors?
Might look like crap but vapes like a champ, is lightweight, sliding back panel for battery access, and has a spring loaded 510.
Something I was working on today (WIP DIY DNA 30 Maple box mod).
Finish is drying currently.
Sometimes it's nice to have a mill, and a lathe in the shop
Sent from my SM-G920V using Tapatalk
I am wanting another pipe mod myself, looks great.
Sent from my SM-G920V using Tapatalk
This is my first build.....it is a duel 26650 built in series
Sent from my SCH-S968C using Tapatalk
Sent from my SCH-S968C using Tapatalk
I love PWM so much bang for the buck. Those dual 26650 PWM builds I posted earlier with the square boards only cost about $7.50 in parts.
Do you use the pass through a lot @david4500 ? Im debating on making one for work, but don't know if I would like it.
Hmm... I have used it some at my computer desk. Having the constant power supply is nice, but at the same time I had a hard time adjusting to having a cord hanging off the mod. It was really something I had in my head that I needed to get out and translate to reality. The board with the tact fire switch, pot, on-off, and standoffs. I had someone commission another OKR passthrough board from me. I made that one to their specifications, but the whole time I had this design in my mind. If you may like to make one (no pressure), please send me a message. I have the board on oshpark (but it isn't shared) and I have a drilling template and mouser/digikey projects saved.
thewanderernick
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
UGHhhhhh are any of you guys willing to sell me a home made mod with temp control....these bad boys you guys got look great
I have looked at your oshpark profile jobs page, and noticed you didnt have it on there. I really haven't got into OKR and Raptors much because to me PWM seems to be great, and very cost effective. But I do like to try new things.
Also was really liking the board standoffs. We use plastic versions of what you did with your pass through box above, at work, that we use with very small headless screws that press in. All that stuff is just collecting dust at work because we havent had to build boards in years for our machines, and calling my name to adapt to box mods
I will have to study up on the OKR build, and message you if I get another digikey/mouser order ready.
I am at awe of you guy's master pieces. I can only hope what I eventually attempt to built is worthy of these pages
VapeTechnologies
VapeTechnologies LLC Advanced Custom Boxes
VU Donator
Member For 4 Years
Member For 3 Years
Member For 2 Years
Unlisted Vendor
Here's some viewing pleasure.. enjoy
3D printed frame, laser cut acrylic doors. 2S PWM (ModPCB Tiny PWM unpopulated boards)
3D printed and laser cut acrylic..............
how I'm sure most of us feel about the FDA recently....
2S PWM.....
2S PWM, CNC'd 1590G etched, powder coated, laser engraved, CNC cut outdoor vinyl.
CNC'd 1590A+ 2S 18650 (Voltrove Electronics) Smart PWM V2.1...
deep relief acid etched, bead blasted, polished, and clear powder coated. Laser engraved lid. Box featured on a few media outlets.
This is currently my personal box, used with a modfather 30mm RTA. It was a lot of work to make this happen.
Batch of mods for the folks running the show over at VapeNation. 2S PWM's acid etched, powder coated, bead blasted, laser engraved, CNC vinyl, 3D printed components, Varitube 510. I like Varitube and always have, regardless of what some people have to say. Both FDV and VT 510's are very good quality and can take the abuse. My personal preference is Varitube but also used plenty of FDV's and like them all.
Thanks for watching
3D printed frame, laser cut acrylic doors. 2S PWM (ModPCB Tiny PWM unpopulated boards)
3D printed and laser cut acrylic..............
how I'm sure most of us feel about the FDA recently....
2S PWM.....
2S PWM, CNC'd 1590G etched, powder coated, laser engraved, CNC cut outdoor vinyl.
CNC'd 1590A+ 2S 18650 (Voltrove Electronics) Smart PWM V2.1...
deep relief acid etched, bead blasted, polished, and clear powder coated. Laser engraved lid. Box featured on a few media outlets.
This is currently my personal box, used with a modfather 30mm RTA. It was a lot of work to make this happen.
Batch of mods for the folks running the show over at VapeNation. 2S PWM's acid etched, powder coated, bead blasted, laser engraved, CNC vinyl, 3D printed components, Varitube 510. I like Varitube and always have, regardless of what some people have to say. Both FDV and VT 510's are very good quality and can take the abuse. My personal preference is Varitube but also used plenty of FDV's and like them all.
Thanks for watching
Leaning tree wood mods DNA 75. Dual LiPo's 2400mah. SMOK cloud beast. CZAR drip tip.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I love the attention to detail with this build. Good job fam 
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
That LED makes me horny
That is coolCoca-Cola Retro Style Collectible SX350 Mod #2
This is the second of only 2 made.
Features 50 Watts, .2 Ohm, Bypass Mode, Fatdaddy 22mm 510 connector, Upgraded 18ga silicone wire, Padded battery sleeve, Small rounded clicky button, USB port, vent hole.
Hello everyone!
Before moving on to another more challenging project, I did some practice on this box. I took this mechanic and I inserted a circuit for a pico 75w, both available on FT. I chose this circuit because it works in TC with adjustable TCR and because it has the right dimensions to take the place of a battery.
Before moving on to another more challenging project, I did some practice on this box. I took this mechanic and I inserted a circuit for a pico 75w, both available on FT. I chose this circuit because it works in TC with adjustable TCR and because it has the right dimensions to take the place of a battery.
