Become a Patron!

Sick RDA build

Youngvapor

Member For 3 Years
Member For 2 Years
Hey guys. So i want to build a sick coil. I want atleast 10 wraps dual SS 316L. Is there any RDAS i can build such huge coils ?
 

BKTOAD

Silver Contributor
Member For 4 Years
Hey guys. So i want to build a sick coil. I want atleast 10 wraps dual SS 316L. Is there any RDAS i can build such huge coils ?

I would say, depending on wire gauge, any rda 22mm or bigger with a 2 post deck.

I can fit a 10.5 wrap 2x28/36 fused clapton dual in my double vision. Or a 12.5 wrap straight 24g dual.

If you want a "sick coil", learn to build advanced coils.
 

Youngvapor

Member For 3 Years
Member For 2 Years
I have put 9 wraps in a Griffin 25 Plus if that helps.
I would say, depending on wire gauge, any rda 22mm or bigger with a 2 post deck.

I can fit a 10.5 wrap 2x28/36 fused clapton dual in my double vision. Or a 12.5 wrap straight 24g dual.

If you want a "sick coil", learn to build advanced coils.
That is pretty sick! Must be some huge cloud production if im not wrong. Of course i have to measure how many amps it will turn into before i build anyrhing :)
 

Jriley

Bronze Contributor
Member For 3 Years
Lol... The question is mass vs wraps.. More impressive is seeing a 4 wrap fill up a 30mm rda and still ramp faster. You building on a series?
 

Youngvapor

Member For 3 Years
Member For 2 Years
Lol... The question is mass vs wraps.. More impressive is seeing a 4 wrap fill up a 30mm rda and still ramp faster. You building on a series?

Going to build it in parallel. Temple styled RDA dual velocity deck. Most likely something like 0.40ohm on a 4 diameter 24 gauge SS316L wire.

All i need to know now is how much voltage will drain the batteries. In ohms calculator it goes to 7.75volts at 150wattage. Is this safe on 4 18650 batteries? Batteries are of course 4.2volts each.

Update: Hard choice, but i dont think i want more heat than 260. So instead or 20 gauge i should probably use 22 at 0.30ohm.

Okay guys so im struggling a bit. Im not sure if i want smaller diameter coils for more wraps or larger. I dont know.

Goal is atleast 10-12 wraps on SS316L

Okay. So im not sure if im going to aim for more gauge, less gauge or less diameter. What is the difference flavor or wattage wise?


Update: Nevermind! So i played around with the heat flux! My build is set!

Okay so i will be running 20Gauge SS316 wire at 0.12ohm 5mm diameter coil. So i think this is it! Shows a good sign at the heat flux :) What do you guys think about that ? :)

8 wraps ! :)
It stays in the green zone at 150 watts :)

Only thing i wonder is. Is it dangerous or bad for batteries to stay underneath 4.7 volts when firing 150watts ?
 
Last edited:

Youngvapor

Member For 3 Years
Member For 2 Years
I went up a little. So umm, instead of the temple i bought the mason 40mm RDA. Going to be awesome. 16wraps 20awg dual 316L coils MMMMM. Heat flux at 200mw on 210watts. Going to be awesome!
 

VU Sponsors

Top