SIGELEI 213 - HELP -S.O.S

[DonJonQ8]

Hi, Im new to the world of vape and Can sure do with some help from my fellow vapestas. Could you tell me what configuration I should run the 213 at? After all the feedback read so far on various sites, Im a bit skeptical and need help figuring this out.

Could you tell me what should I vape at: ? Which would be considered safe for vaping...Ive got the Gemini RTA with the coils that were sent with the box itself. The image below of the battery is what im using at the moment. Is it ok? Some say it isnt.

Ohms: ?
Volts: ?
Watts: ?
Temp: ?
Amp: ?
Battery Type: ?

Ive just bought the Innokin isub 5ml Tank today to use with the Sigelei 213.
At what recommended specs should I vape at?


View attachment 60273
View attachment 60272

 

[JuicyLucy]

Here is my take

Neither of your images is showing,

Ohms = a matter of personal preference. If you are definitely planning to use the included coils, the mod will show you what the ohm is on them.

volts= with a regulated mod, vape in wattage mode, that will automatically control the voltage

Watts = start low and gradually turn it up until you are satisfied with the quality of the vape. If it gets too hot, tastes burnt, turn the wattage down. Start at 15 or 20 and adjust up (or even down) until you like the vape you are getting. If you coils are over 1 ohm, start even lower.

temp = Really wouldn't want to mess with TC unless you are addressing a problem later.

amp= battery should be able to do at least 20A. Batteries that claim over 40 Amps are rewraps and mislabeled

battery= both those mods take 18650, buy the best quality/brand you can afford that will do at least 20A. Best brands: Sony, LG, Samsung or even Panasonic. Avoid off brands like Efest or anything with the word "fire" in it.

Others may have other opinions.

 

[DonJonQ8]

tart at 15 or 20 and adjust up (or even down) until you like the vape you are getting. If you coils are over 1 ohm, start even lower.

Here is my take

Neither of your images is showing,

Ohms = a matter of personal preference. If you are definitely planning to use the included coils, the mod will show you what the ohm is on them.

volts= with a regulated mod, vape in wattage mode, that will automatically control the voltage

Watts = start low and gradually turn it up until you are satisfied with the quality of the vape. If it gets too hot, tastes burnt, turn the wattage down. Start at 15 or 20 and adjust up (or even down) until you like the vape you are getting. If you coils are over 1 ohm, start even lower.

temp = Really wouldn't want to mess with TC unless you are addressing a problem later.

amp= battery should be able to do at least 20A. Batteries that claim over 40 Amps are rewraps and mislabeled

battery= both those mods take 18650, buy the best quality/brand you can afford that will do at least 20A. Best brands: Sony, LG, Samsung or even Panasonic. Avoid off brands like Efest or anything with the word "fire" in it.

Others may have other opinions.

Thank you Lucy