Hi Vaping Underground members, In this review i take a look at the Mag Baby 50W Mod Kit with TFV12 Baby Prince Tank from Smok. The SMOK Mag Baby 50W Mod Kit with TFV12 Baby Prince Tank was supplied for the purpose of this review by Maggie from the Healthcabin.
https://www.healthcabin.net/smok-mag-bab...17507.html
Introduction
The Baby Mag is a tiny pocket friendly version of the ergonomically friendly Smok Mag device, and also comes with a baby version of the prince tank. The device itself warrants the Baby Mag title due to the almost identical pistol handle shape of it's parent but once the aesthetics and ergonomics are taken out of the equation the tiny 50w device with a built-in 1600mAh battery has more in common with the Q-Box a small device that packed a punch, so what sort of a punch does the Baby Mag pack? I give my humble opinion.
In the Box
Contents:
1pc Mag Baby Mod
1pc TFV12 Baby Prince Tank
1pc V8 Baby-Q2 0.6ohm Dual Coils(Pre-installed)
1pc V8 baby-M2 0.25ohm Dual Coils
1pc Replacement Glass Tube
1pc USB Cable
1pc User Maanual
Spare parts
Aesthetics and Ergonomics
The Baby Mag comes in typical Smok packaging and is a tiny version of it's parent the Mag. The Baby Mag like the Mag is shaped like the handle section of a gun, giving the device a pistol grip. Whatever the rights or wrongs of this there is no denying the ergonomics are unrivalled in my opinion. I received the Navy Blue Black version that comes with a matching Navy Blue Tank, it's also available in Black Red, Red Black, Silver Black, Black Prism, Gold Black, Purple Black, Green Black, and Pink Black. One side of the device has a trigger fire button at the top and underneath the device is curved, on this curved section is a Black panel that houses a Black pill shaped rocker style vertical bar for the navigational buttons, your 3 fingers (your other finger is used for firing) rests on this section comfortably and as explained later you don't alter anything by mistake despite the rocker being there. The opposite side is again shaped to make the palm of your hand feel comfortable and has a raised black panel with venting. The front of the device has a mirrored black panel shaped to match the contours of the device which houses the 0.96" OLED screen, at the bottom of this panel we have "SMOK" printed and at the top of both front and back we have more venting. The back of the device has a Carbon fiber sticker that's shaped like an upside down hockey stick, to the side of this is a vertical micro USB port and a reset hole. The bottom of the device has branding and safety stamps printed in bright White, moving to the top we have a 510 plate which is raised one side to be level as the top of the device is slightly slanted, the 510 is Gold plated and spring loaded. The tiny device is well made and the finish on mine seems durable.
Baby Prince Specs and Features:
Size: 53.7 x 26mm /23mm (EU Edition)
Capacity: 4.5ml/2ml (EU Edition)
Material: Stainless steel
Cobra drip tip
Bulb glass tube with large capacity to 4.5ml
Patented locking mechanism
Top rotary refill system
Adjustable bottom airflow
Thread: 510 thread
Colours: Matte Black, Stainless, Purple, White, Auto Pink, Gold, Green, Red, Prism Blue, 7-Colour
These are the colour choices when buying the tank separately the colour with the kits matches the device.
Baby Prince Overview
The Baby Prince has been reviewed countless times and when i say that i actually mean the Baby Beast as this uses Baby Beast coils and to me seemed to vape exactly the same way as the Baby Beast. The tank has the aesthetics including the heavy texturing around the base and top of the Prince and also has the Prince's lock mechanism. The Baby Prince is top-fill and with the pre-installed bubble glass the capacity is 4.5ml it also comes with a 2ml straight glass, the tank comes with a cobra style 510 drip tip that can be changed for your own. The coils as mentioned uses the Baby beast coils that screw straight into the base, 2 coils are included which are the pre-installed Q2 0.6ohm which i found best at 45w and the M2 0.25ohm which i found the sweet spot at 40W. My preference was the Q2 coil but both gave really good stock coil flavour.
Review Continued Below:
https://www.healthcabin.net/smok-mag-bab...17507.html
Introduction
The Baby Mag is a tiny pocket friendly version of the ergonomically friendly Smok Mag device, and also comes with a baby version of the prince tank. The device itself warrants the Baby Mag title due to the almost identical pistol handle shape of it's parent but once the aesthetics and ergonomics are taken out of the equation the tiny 50w device with a built-in 1600mAh battery has more in common with the Q-Box a small device that packed a punch, so what sort of a punch does the Baby Mag pack? I give my humble opinion.
In the Box
Contents:
1pc Mag Baby Mod
1pc TFV12 Baby Prince Tank
1pc V8 Baby-Q2 0.6ohm Dual Coils(Pre-installed)
1pc V8 baby-M2 0.25ohm Dual Coils
1pc Replacement Glass Tube
1pc USB Cable
1pc User Maanual
Spare parts
Aesthetics and Ergonomics
The Baby Mag comes in typical Smok packaging and is a tiny version of it's parent the Mag. The Baby Mag like the Mag is shaped like the handle section of a gun, giving the device a pistol grip. Whatever the rights or wrongs of this there is no denying the ergonomics are unrivalled in my opinion. I received the Navy Blue Black version that comes with a matching Navy Blue Tank, it's also available in Black Red, Red Black, Silver Black, Black Prism, Gold Black, Purple Black, Green Black, and Pink Black. One side of the device has a trigger fire button at the top and underneath the device is curved, on this curved section is a Black panel that houses a Black pill shaped rocker style vertical bar for the navigational buttons, your 3 fingers (your other finger is used for firing) rests on this section comfortably and as explained later you don't alter anything by mistake despite the rocker being there. The opposite side is again shaped to make the palm of your hand feel comfortable and has a raised black panel with venting. The front of the device has a mirrored black panel shaped to match the contours of the device which houses the 0.96" OLED screen, at the bottom of this panel we have "SMOK" printed and at the top of both front and back we have more venting. The back of the device has a Carbon fiber sticker that's shaped like an upside down hockey stick, to the side of this is a vertical micro USB port and a reset hole. The bottom of the device has branding and safety stamps printed in bright White, moving to the top we have a 510 plate which is raised one side to be level as the top of the device is slightly slanted, the 510 is Gold plated and spring loaded. The tiny device is well made and the finish on mine seems durable.
Baby Prince Specs and Features:
Size: 53.7 x 26mm /23mm (EU Edition)
Capacity: 4.5ml/2ml (EU Edition)
Material: Stainless steel
Cobra drip tip
Bulb glass tube with large capacity to 4.5ml
Patented locking mechanism
Top rotary refill system
Adjustable bottom airflow
Thread: 510 thread
Colours: Matte Black, Stainless, Purple, White, Auto Pink, Gold, Green, Red, Prism Blue, 7-Colour
These are the colour choices when buying the tank separately the colour with the kits matches the device.
Baby Prince Overview
The Baby Prince has been reviewed countless times and when i say that i actually mean the Baby Beast as this uses Baby Beast coils and to me seemed to vape exactly the same way as the Baby Beast. The tank has the aesthetics including the heavy texturing around the base and top of the Prince and also has the Prince's lock mechanism. The Baby Prince is top-fill and with the pre-installed bubble glass the capacity is 4.5ml it also comes with a 2ml straight glass, the tank comes with a cobra style 510 drip tip that can be changed for your own. The coils as mentioned uses the Baby beast coils that screw straight into the base, 2 coils are included which are the pre-installed Q2 0.6ohm which i found best at 45w and the M2 0.25ohm which i found the sweet spot at 40W. My preference was the Q2 coil but both gave really good stock coil flavour.
Review Continued Below:
