Hi Vaping Underground members, In this review i take a look at the X-Force AIO Starter Kit 2000mAh from Smok. The SMOK X-Force AIO Starter Kit 2000mAh was supplied for the purpose of this review by Micky from Cloumix.
https://www.cloumix.com/smok-x-force-kit.html
Introduction
The X-Force is a refillable pod system aimed at the subohm vaper unlike the many pod systems we have seen released of late geared towards high nicotine and nic salts. Its not a new idea as the device is very similar to the Dolphin released by Joyetech in the second half of last year even the ceramic housed 0.3ohm coil heads and how they get fitted into the base of the device is pretty much identical. The X-Force comes in a TPD version which holds 2ml of e-liquid while the standard version holds an impressive 7mls. So let's have a look and i will give my thoughts.
In the Box
Contents:
Standard Edition
1x X-Force MOD
1x X-Force Tank (7ml)
1x X-Force Coil 0.6ohm (Pre-installed)
1x X-Force Coil 1.2ohm
1x USB Cable
1x User Manual
EU Edition
1x X-Force MOD
1x X-Force Tank (2ml)
1x X-Force Coil 0.6ohm (Pre-installed)
1x X-Force Coil 1.2ohm
1x USB Cable
1x User Manual
Aesthetics and Ergonomics
The X-Force Kit come in the usual Smok packaging that has the the colour of the device pictured on the box. I received the Red version which is a nice deep Red, it's also available in Black, White, Yellow, Blue and Purple, the Black version has a Red fire bar and all other versions have a Black fire bar, the rest of the device (apart from the translucent black pod) is the colour of choice. Apart from the pod section protruding out the top of the device the X-force looks more like a dual battery regulated device in size and with a very nice clicky fire bar, the protruding top section of the pod has a wide bore mouthpiece to one side then is slanted downwards. Front and back of the device tapers outwards from the sides meeting in the middle and all edges are rounded off, with the position of the fire bar, size and being lightweight the device is ergonomic and feels very nice when firing. The front of the device has "SMOK" printed on the pod section and "X-FORCE" printed at the bottom while the centre see's 5 holes lined up vertically in a row, these are for the LED's to show battery status indication. Underneath the fire bar on the side we have the micro USB port the other side is featureless. The bottom of the device has safety stamps and venting. The device is made from plastic which helps make it a budget price but the build quality is good and finish looks durable.
X-Force Specs and Features:
Parameters
X-Force MOD
Size: 102.5 x 52 x 30.4mm
Battery Capacity: 2000mAh
Power Range:＜45W
Standby Current:＜200uA
Input Voltage: 3.3V-4.2V
Charging Voltage: 5V
Charging Current: 0.6A-0.7A
Material: PC
X-Force Tank
Size: 52 x 30.3 x 51.3mm (Standard Edition)/ 52 x 30.3 x 51.3mm (EU Edition)
Capacity: 7ml (Standard Edition)/ 2ml (EU Edition)
Coil Resistance: 0.6ohm/1.2ohm Transverse Coil
Material: PCTG
Portable one-button activation device with minimalist design
Elaborately carved lines and cutting design
2000mAh battery capacity with 5 LED indicators
Multiple automatic pretections
Unique and remarkable X-Force Coil
Transverse coil with vertical airflow system
Massive cloud and dense flavour
Colours: Black, Red, White, Yellow, Blue, Purple
Check What You Get
The Kit i received came with 2 0.3 coil heads so i am obviously reviewing the device as if that's what you get but as you can see from the manufacturers specs it states it comes with a 0.6 and a 1.2 coil head it also lists this on vendors websites but then they will get their information from the manufacturers website so it could still be a mistake and the 0.6 and 1.2 coils could well be coil heads you can buy separately
The Pods and Coil Heads
The coil has cotton wicking materiel and is then housed in a ceramic casing, the casing has a juice port on top to allow the liquid in the pod to saturate the wicking material and contacts on the base which make contact inside the device. The base of the pod has a silicone casket with cutout the shape of the coil head, you simply place the coil head into the cutout where it fits perfectly and very securely. The pod has a wide bore mouthpiece to one side on the top and to the other a large airflow opening (the largest airflow i have seen on a pod device). On the side of the pod underneath where the mouthpiece is located is a removable bung which reveals your juice port, again the size of the juice port is another pro it's a very nice size. After filling the pod i would recommend letting it sit for 10 minutes before vaping, the pod is just press fitted into the device but fits very securely so no issues there. The pod is tinted black, despite this it is translucent enough to see your juice level but isn't ideal (it's not as bad as some like the EQ for example).
Review Continued Below:
https://www.cloumix.com/smok-x-force-kit.html
Introduction
The X-Force is a refillable pod system aimed at the subohm vaper unlike the many pod systems we have seen released of late geared towards high nicotine and nic salts. Its not a new idea as the device is very similar to the Dolphin released by Joyetech in the second half of last year even the ceramic housed 0.3ohm coil heads and how they get fitted into the base of the device is pretty much identical. The X-Force comes in a TPD version which holds 2ml of e-liquid while the standard version holds an impressive 7mls. So let's have a look and i will give my thoughts.
In the Box
Contents:
Standard Edition
1x X-Force MOD
1x X-Force Tank (7ml)
1x X-Force Coil 0.6ohm (Pre-installed)
1x X-Force Coil 1.2ohm
1x USB Cable
1x User Manual
EU Edition
1x X-Force MOD
1x X-Force Tank (2ml)
1x X-Force Coil 0.6ohm (Pre-installed)
1x X-Force Coil 1.2ohm
1x USB Cable
1x User Manual
Aesthetics and Ergonomics
The X-Force Kit come in the usual Smok packaging that has the the colour of the device pictured on the box. I received the Red version which is a nice deep Red, it's also available in Black, White, Yellow, Blue and Purple, the Black version has a Red fire bar and all other versions have a Black fire bar, the rest of the device (apart from the translucent black pod) is the colour of choice. Apart from the pod section protruding out the top of the device the X-force looks more like a dual battery regulated device in size and with a very nice clicky fire bar, the protruding top section of the pod has a wide bore mouthpiece to one side then is slanted downwards. Front and back of the device tapers outwards from the sides meeting in the middle and all edges are rounded off, with the position of the fire bar, size and being lightweight the device is ergonomic and feels very nice when firing. The front of the device has "SMOK" printed on the pod section and "X-FORCE" printed at the bottom while the centre see's 5 holes lined up vertically in a row, these are for the LED's to show battery status indication. Underneath the fire bar on the side we have the micro USB port the other side is featureless. The bottom of the device has safety stamps and venting. The device is made from plastic which helps make it a budget price but the build quality is good and finish looks durable.
X-Force Specs and Features:
Parameters
X-Force MOD
Size: 102.5 x 52 x 30.4mm
Battery Capacity: 2000mAh
Power Range:＜45W
Standby Current:＜200uA
Input Voltage: 3.3V-4.2V
Charging Voltage: 5V
Charging Current: 0.6A-0.7A
Material: PC
X-Force Tank
Size: 52 x 30.3 x 51.3mm (Standard Edition)/ 52 x 30.3 x 51.3mm (EU Edition)
Capacity: 7ml (Standard Edition)/ 2ml (EU Edition)
Coil Resistance: 0.6ohm/1.2ohm Transverse Coil
Material: PCTG
Portable one-button activation device with minimalist design
Elaborately carved lines and cutting design
2000mAh battery capacity with 5 LED indicators
Multiple automatic pretections
Unique and remarkable X-Force Coil
Transverse coil with vertical airflow system
Massive cloud and dense flavour
Colours: Black, Red, White, Yellow, Blue, Purple
Check What You Get
The Kit i received came with 2 0.3 coil heads so i am obviously reviewing the device as if that's what you get but as you can see from the manufacturers specs it states it comes with a 0.6 and a 1.2 coil head it also lists this on vendors websites but then they will get their information from the manufacturers website so it could still be a mistake and the 0.6 and 1.2 coils could well be coil heads you can buy separately
The Pods and Coil Heads
The coil has cotton wicking materiel and is then housed in a ceramic casing, the casing has a juice port on top to allow the liquid in the pod to saturate the wicking material and contacts on the base which make contact inside the device. The base of the pod has a silicone casket with cutout the shape of the coil head, you simply place the coil head into the cutout where it fits perfectly and very securely. The pod has a wide bore mouthpiece to one side on the top and to the other a large airflow opening (the largest airflow i have seen on a pod device). On the side of the pod underneath where the mouthpiece is located is a removable bung which reveals your juice port, again the size of the juice port is another pro it's a very nice size. After filling the pod i would recommend letting it sit for 10 minutes before vaping, the pod is just press fitted into the device but fits very securely so no issues there. The pod is tinted black, despite this it is translucent enough to see your juice level but isn't ideal (it's not as bad as some like the EQ for example).
Review Continued Below:
Last edited:
