Some help with tc

[BottleFed_2J_6766]

So I've had my rx200s for a month and just got some titanium wire and made some coils. Running .07 ohms I went to go use it on titanium setting and the tc is set to 360 and I'm on low watts but every time I go to hit it it says temp protection and drops the watts to 0.1. Confused as to why this is happening. Any advice or suggestions would be greatly appreciated.

Merry Christmas.


Sent from my iPhone using Tapatalk

 

[HondaDavidson]

Is it vaping? Could be your too low with too small a wire for the settings. BUT "temp Protect" messages are normal on some TC devices. My pico for example. That and the lower reading for wattage show the mod is regulating, assuming it IS firing. Onec the set temp is reached the mod may not need to fire at full set wattage. It only fires using the watts it needs.

 

[Markw4mms]

Try upping the temp to around 420°- 450°F.

 

[skt239]

I would first try to up the temp. If that doesn't work, you could always try the TCR function. I believe the TCR value for Ti is .00350, start there and work your way up or down until you find what works best.