Even a Wanko?
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
prolly better than the Coval?
dunno never vaped a coval.
Mark Todd liked the vape from a Wanko.
Do you want a Coral rda?
Well the question was a bit vague. therefore I went to a fitting on the mod aspect.Thanks, that was hepful.
MTL? DL? clouds?
What does the user want from their atty?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Thanks, that was hepful.
It's about a universal law: atties that come with squonkers suck
Nope but would not mind a couple of Dripbox 160 attys.
With the RBA deck that does not have the big round screws on top of the posts.
A bit of both MTL and DL but I lean more towards DL, and the more flavor/fewer clouds the better.
At home I like a Cleito 120 on a Battlestar, fun to irritate my dog with clouds bro clouds.
If I'm on the go it's always a Pico in one pocket, extra battery in the other, and whatever tank is least burny-est at the time. Usually a Serpent ...seems to have a better coil life than the Melo III mini. But both cool tiny no fuss tanks.
This atty is nice.
https://www.fasttech.com/p/6070300
basically MTL but a restricted lung with nice flavor and fairly dense moderate clouds.
comes with squonk pin.
works well in 20-40 W range depending on your build.
I do a .3-.4 26 ga SS build for a mech on mine.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Was impressed with a try on a Mello 3, might get one someday
That is kinda of bitch to squonkify and build on
- though it does produce outstanding flavorMy vote, of course, is for a Hadaly
That Coral is a hunk of shit. A o-atty clone works well, as does a NARda clone.
comes with squonk pin.Was impressed with a try on a Mello 3, might get one someday
That is kinda of bitch to squonkify and build on
My vote, of course, is for a Hadaly
Too true, the Origen Little is a good flavor atty as well.
The O-atty @The Cromwell linked comes with a bf 510 pin. I have one!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
It does, and getting that bitch in there is more than a notion, lol
If I remember, you are kinda new to building and RDAs in general
Would definitely recommend an Hadaly - great attie
If you go for a clone, get ShenRay's version, not the SXK
There are other clones of the Hadaly out there, some do not come with squonk pins
I have one, I'll trade you for a Nuppin
, Just kidding, the Melo3 isn't even in the same zip code with the Nuppin.
Like @JuicyLucy said,
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Okay folks - here is today's cautionary tale on mechs
Was vaping away on a P67 with a shift clone yesterday, enjoying the vape immensely.
Set the mod down on my nightstand and went into the other room to do something.
Can't remember how long I was gone - thinking less than 5 minutes?
Anyway, as I'm about to sit down I hear a noise I don't like, sounds like an attie hissing
Son of a gun, when I set the P67 down next to my coffee mug, it was too close and was pressing against the firing button!!!!
Swatted it away from the cup - and didn't remove the attie this this morning:
Was vaping away on a P67 with a shift clone yesterday, enjoying the vape immensely.
Set the mod down on my nightstand and went into the other room to do something.
Can't remember how long I was gone - thinking less than 5 minutes?
Anyway, as I'm about to sit down I hear a noise I don't like, sounds like an attie hissing
Son of a gun, when I set the P67 down next to my coffee mug, it was too close and was pressing against the firing button!!!!
Swatted it away from the cup - and didn't remove the attie this this morning:
Oh wow! Glad it wasn't worse, but that reminds me I have a shift clone from Hank that I have yet to try....
Sent from my iPhone using Tapatalk
Thanks! Yes, I'm brand new to rdas and building, so something pretty close to idiot-proof is good.
There is no such thing as idiot-proof....for a talented idiot! Please, don't ask how I know!
Done deal!
If I stumble across your Nuppin what's the price range? Is there specific packaging or dodads with it?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Thanks! Yes, I'm brand new to rdas and building, so something pretty close to idiot-proof is good.
Brewski's answer is spot on, lol
However, some are easier than others, that is for sure
Folks that have been building a long time sometimes forget that
There is no such thing as idiot-proof....for a talented idiot! Please, don't ask how I know!
That's why I said "pretty close to idiot proof." I have two grown boys. I'm very much aware how ingenious idiots can be.
And thank you for keeping us newbs in mind.
Good reminder, just wish it didn't happen. Look on the bright side: you still have the drip tip!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Well, shi/....is the mod ok?Nope!
That fucker is warped on the other side and definitely melted into the top cap
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Appears so - the spring didn't melt at least
Haven't had the guts to fire it up with another attie yet, lol
Closest I've ever come to venting a battery or shorting out a mod
Yikes! Everyone's worst nightmare.
Good thing you heard the hissing...
Mannn imagine if you had left the house.
No. No don't imagine that!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Since I got my first P67, I loved the button because you barely press it and the mod fires with very little resistance
But I always thought it could prove a little more dangerous - and this proves it
I didn't even remember setting it up to the mug, but I did
But I always thought it could prove a little more dangerous - and this proves it
I didn't even remember setting it up to the mug, but I did
I had no issues. Have to dissassemble and study...
Poor widdle shift clone...
I like mine. Amazing how hard they are to over squonk.
Mug magnet in the mod?Since I got my first P67, I loved the button because you barely press it and the mod fires with very little resistance
But I always thought it could prove a little more dangerous - and this proves it
I didn't even remember setting it up to the mug, but I did
New North Korean ICBM?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I over-squonked mine constantly when I first got it - guess I adjusted somewheres along the way
Thank god it's not one of my die-hard favorites
Doubt I'll replace it. Actually, if the deck is still good, I have the stock top cap around here somewhere
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
It's the Tower Of Nuppin.
Just messin' with BrewBear a little....
Move along Train, nuppin to see here!
It's the Tower Of Nuppin.
Just messin' with BrewBear a little....
Ruling!
You sure can make a grown man cry!
I must have gotten lucky on wicking. I have to work to oversquonk mine.
Stock cap? Mine came with a translucent cap and a black one.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Yeah, first attie he ever talked me into getting, lol
No, that's a weird one - the "Vinyl by SJ" tip.
I kinda like it on a few setups - similar to the Router but a little more open.
Doesn't fit everything though...
I kinda like it on a few setups - similar to the Router but a little more open.
Doesn't fit everything though...
Looks like it Melted into a Custom Derringer style Clear cap now
I'm glad nothing worse happened