Yeah. But the + is raised off the deck. Which means juice flows uneven to wicks with the barrier in the middle. Stumpy is flush with the deck (needs drilling though. Which is easy)
Sent from my LG-H815 using Tapatalk
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
Yeah. But the + is raised off the deck. Which means juice flows uneven to wicks with the barrier in the middle. Stumpy is flush with the deck (needs drilling though. Which is easy)
Sent from my LG-H815 using Tapatalk
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Oh Ok I see what you're saying.
Yeah. But the + is raised off the deck. Which means juice flows uneven to wicks with the barrier in the middle. Stumpy is flush with the deck (needs drilling though. Which is easy)
Sent from my LG-H815 using Tapatalk
I'm an over squonker so... lol
Stumpys seem to have disappeared. Impossible to find. They are great for BF as they have a flat deck bottom that drains perfectly. Glad I bought four of them when they were available. FT discontinued them.
minimum order is 5, but i ordered from here http://www.dhgate.com/product/newes...tumpy/389158447.html#s1-0-1b;searl|0884400945
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
i just missed hump back whale migration, i think they go up your west coast from near me lol
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Hmmmm
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
As scarce as they are to get these days, I wouldn't hesitate to grab 5 if I was looking for them
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
At that price, I'd have to wonder how much folks would be willing to pay for one modded for bf - plus shipping.
They are inexpensive enough to just buy and keep though.
I bought 5. I figure I'll snap at least one drill bit and get it lodged. Not sure if the fd pins will fit. I just dremeled a channel down one side of the pin on the one I have.
Another supplier on the same site might have better prices with higher minimum order.
Sent from my LG-H815 using Tapatalk
Another supplier on the same site might have better prices with higher minimum order.
Sent from my LG-H815 using Tapatalk
I was just planning to drill it myself. But does anyone know if a pin swap is possible using 1 of the fat daddy BF pins?
Cool I have 3 of those here at home. Now One of you lazy bastards volunteer yourselves to organize this!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
They're so cheap and shipping so expensive, I don't think it's worth it to try to do a co-op.
The buyer gets 5 stumpy clones $46.20
You miss are correct. even if 10 people order 5 each it will still cost around $45 - $6.79 X 5 + 6.80 shipping once they get here sorry had no thought it thru.
Alright lazy bastards as you were nothing to see here.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I think fb wanted just 1. Not 5.
On modding. Catfish charges $40 for clones.
Sent from my LG-H815 using Tapatalk
When you say $40 do you mean just to drill it or for a complete stumpy clone?
The whole thing. I think 40 + shipping is his flat rate for clones.
Sent from my LG-H815 using Tapatalk
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I'm good on Stumpies right now, but I'm sure there are some folks looking
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
He is getting $45 + shipping for SXK Narda clones that go for $12 on FT
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Word is that once Element is done with the Mods they're doing now there may be some Stumpies pumped out
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
wow, a 12$ clone and a 1$ pin... I should setup shop
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Here it is, had to get home
Here is the hobo 3.1 t he cotton fills that space where the floor is raised
Sent from my iPhone using Tapatalk
Here it is, had to get home
Here is the hobo 3.1 t he cotton fills that space where the floor is raised
Sent from my iPhone using Tapatalk
Did you drill that out or do a pin swap?
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
it will take a fat daddy m3 pin, but you'll have to file it down.
I robbed the pin in mine from the vaporshark vortices
Ok thanks Getting ready to place a FT order and I think I will add one of these along with a goon so that I can see what all the fuss Hank is on about. That hobo looks pretty nice tho so i hope I like it. If not I am definitely putting all the blame on you.
The Hobo V3.1 I got has a brass positive pin with an Allen head so it's easy to drill out. Plus, it's an M3 so you can go with a "full" 1/16" hole. I shortened the pin so it is flush and I have had no problems with flooding. Even though it is less than ideal, it still works great. I prefer the Stumpy but this Hobo is more than good enough for a fake Reo, LOL. Vapes like a motherfucker. 
Last edited:
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
hehehe dude, I ended up getting a goon. because of Spanky also. he must be getting commissionOk thanks Getting ready to place a FT order and I think I will add one of these along with a goon so that I can see what all the fuss Hank is on about. That hobo looks pretty nice tho so i hope I like it. If not I am definitely putting all the blame on you.
I converted one of the new 22mm Goons -
And how do you like it? No matter what you can still blame Hank.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Vapes perfectly and produces better flavor than the 24mm - adore it.
There isn't the same room inside as the regular, but it converted just as easy as the 24m (2.5 squonk pin)
Love how the Goon of both size squonk - they drain perfectly, so you can get a fresh squonk with each vape and never over-feed it.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
This would have been good to know day before yesterday
What is a 0 16?My o16 clones finally shipped from focalecig
Sent from my LG-H815 using Tapatalk
San Antonio,Texas
VapinVegas01
Member For 4 Years
My o16 clones finally shipped from focalecig
Sent from my LG-H815 using Tapatalk
Mine still says order prioritized whatever that means.
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
My o16 clones finally shipped from focalecig
Sent from my LG-H815 using Tapatalk
Mine shipped
What is the one on the left? That one might have enough air for me.
That's a Nuppin.
Chinese mystery metal.