Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
I think I know where a couple are available, right this very moment. Dangnabbit, you are probably gonna get the one that I've been trying to figure out how to squeeze into my budget for the last couple weeks, aren't you?
Like this ??!!
Attachments
Ding ding ding you are correct! No eyeballing it's in possession and in use. The quality of the build is fantastic.
May have found a breakthru fix for the coppervapes.
Stay tuned to your favorite channel for a big announcement!
will take a few days to verify....
Stay tuned to your favorite channel for a big announcement!
will take a few days to verify....
Just got this one today!
Thanks to @MsLoud
I must say, this is a nice squonker.
Much smaller that I thought it would be but has a nice weight and feel to it.
It will definitely be in rotation.
What kind of fix? It's there a problem I need to know?
Sent from my iPhone using Tapatalk Pro
The weak point is the contact between the switch screw and the spring conductor.Just got this one today!
Thanks to @MsLoud
I must say, this is a nice squonker.
Much smaller that I thought it would be but has a nice weight and feel to it.
It will definitely be in rotation.
What kind of fix? It's there a problem I need to know?
Sent from my iPhone using Tapatalk Pro
You have to clean between them about once a week or so.
a bit of No ox or even wd40 in between the screw and the spring helps.
A bit of 400 grit wet sand paper is what I use for cleaning.
order some spare parts kits ffrom FT while they are available and you should be able to keep the CV's going forever.
2 different kits one for the one with the skinny switch shaft and the other has a larger switch shank. you should be able to look at yours with the switch apart and be able to tell the difference from the pics on FT.
I have 2 Coppervapes and love them both.
But improvements can be made.
My out and about vape. A beltclip cell phone holder with the flap cut off. Works great.
Only 2? I seem to have collected them the way @JuicyLucy collected Merlins.
Might get another 1 or 2 later if things work out.
The aluminum is amazingly light, great carry mod. The brass? That sucker is a brick, mine is a desk mod only, never leaves my desk.
I only have silver alum ones. Light and no paint to chip.
when I get more they will also be silver/alum ones.
when I get more they will also be silver/alum ones.
jazzman
"I'm Old, Fat and Ugly with a crappy attitude!
VU Donator
Silver Contributor
Member For 4 Years
The problem is,we never stop saying "what's one more going to hurt". If you think it's bad now,just wait till your squonker gets there lol
jazzman
"I'm Old, Fat and Ugly with a crappy attitude!
VU Donator
Silver Contributor
Member For 4 Years
Once it get's here, then all of a sudden, another one show's up, then another and another. I can tell the wife, "It's the only hobby I have". But I don't think it will fly with her.
Random off-topic:
Digging through my drawers and I find an old Hammond 1590B enclosure.
Holy shit this thing is a monster.... good orca case though!
Digging through my drawers and I find an old Hammond 1590B enclosure.
Holy shit this thing is a monster.... good orca case though!
Hammond cases are great except for the slight lean from the sloped sides.
My first attempt at mod making with DNA30 boards.
My first attempt at mod making with DNA30 boards.
Hammond cases are great except for the slight lean from the sloped sides.
My first attempt at mod making with DNA30 boards.
Oh, for sure, I had just forgotten how large they actually are. It would be like building inside a shoebox after all of these tiny enclosures I've been building.
Nice work there!
Based on something I saw on Facebook*, I'm going to try to put a BF pin in the Poseidon III RDA. They are super cheap and are basically the same barrel and airflow as the upcoming Haku RDA but with Narda/Hadaly style clamps instead of the Haku's machined in slots. It has a very flat deck and relatively high airflow holes so hopefully decent for squonking. Has anyone else tried it?
*(someone was being a bit dickish, saying the Haku wasn't original, like anything actually is, lol)
*(someone was being a bit dickish, saying the Haku wasn't original, like anything actually is, lol)
They both look like an O-atty with the clamps rotated 20 degrees...
Based on something I saw on Facebook*, I'm going to try to put a BF pin in the Poseidon III RDA. They are super cheap and are basically the same barrel and airflow as the upcoming Haku RDA but with Narda/Hadaly style clamps instead of the Haku's machined in slots. It has a very flat deck and relatively high airflow holes so hopefully decent for squonking. Has anyone else tried it?
*(someone was being a bit dickish, saying the Haku wasn't original, like anything actually is, lol)
I just ordered the new Modmaker squonk refill kit.Found a US vendor that has them as well as the supersofts.He said he plans on stocking the 510s also when they have them back in stock.
http://vapeologyma.com/index.html
http://vapeologyma.com/index.html
Are there professionals that will help you buy stuff? I mean the people in this thread are pretty good enablers, but as far as I know none of us get paid for it, so technically we aren't professionals. But if you are willing to pay for the enabling...And just pulled the trigger on the Boxer clone from Fasttech.I need professional help
Great find, thank you.
If anyone wants my L'Octopus with the Odis Stab wood door and Odis 16 atty, ill let it go to a bonker for $275 PayPal friends and family plus shipping ($8) just post in my FS thread.... that's $410 in RRP prices
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
This - loving it!
What RDA is that? That combo is tough looking!
Sent from my SM-G925P using Tapatalk
Khanninnarh
Member For 3 Years
And just pulled the trigger on the Boxer clone from Fasttech.I need professional help
Please let us know how it is!! I'm interested in that one as well.
Sent from my iPhone using Tapatalk
Will do. Might be awhile before it gets here. Says ships in 7 days,but the order page estimates it will ship 6/27.
Sent from my LGMS550 using Tapatalk
Did they specify the year?
Khanninnarh
Member For 3 Years
Nope. But it will probably still get here before the real boxer squonkers start shipping lol.
Sent from my LGMS550 using Tapatalk
Cool man and thanks for throwing the links in there too.
Sent from my SM-G925P using Tapatalk
I am thinking of purchasing a squonker... Molly's will be available this Saturday and thinking of nabbing one of these. Never squonked before, and I do know there are cheaper alternatives...and local (US) vendors... But the Molly...checks off many of my wants...Sexy...fits 24's easily...easy to service (clean)...any insight from you long time Squonk-a-holics would be appreciated...even if its to bash the Molly...or to suggest what you feel is better at $150 +- $20.
Thanks!
Don
Thanks!
Don
I don't know much about the Molly's,but love the look of them. I see a lot of people on the Facebook groups wanting them,so if you have the means to buy one,I'd go for it. With the higher end squonkers if you don't like them, they can usually be traded off for something else.
Ok, I finally remembered why I didn't pick up a copper vape squonk before now. It's this
Man I really hate having to unscrew this every time I change batteries.
But on the upside, I am really liking this baby. I guess if that is the worst I can come up with, I can prob learn to live with it.
Sent from my iPhone using Tapatalk Pro
Man I really hate having to unscrew this every time I change batteries.
But on the upside, I am really liking this baby. I guess if that is the worst I can come up with, I can prob learn to live with it.
Sent from my iPhone using Tapatalk Pro