SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
it's a full on sqounk day for me
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
COOL!3d printed:
But the fit and finish leaves a bit to be desired.
What is the one on the right?it's a full on sqounk day for me
Looks like a Dripbox 160 styled mod, down to the venting locations and top screws.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
The geekvape Gbox S100. actually uses the same bottles as the drip box. It has a metal pick up tube though which is really nice
So does the Dripbox 160. the tube is nice.
It is basically a Dripbox 160 ripoff? Even the control panel is the same layout.
Case is nicer, more rounded though.
Are we sure that mod is not made for them by Kanger?
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Could be lol. I don't have a drip box to compare
Just watched Deans review of the S100.
It is basically a Dripbox 160 with a bigger case for bigger attys and a different bottom door.
The bottle Tube IS Kanger and so are the bottles.
The case even fastens together almost identically.
I do not like that the batteries fall out whenever you fill your bottle.
The little magnetic bottle door on the Kanger is a bit dinky but better imho.
I expect that the mod is made by Kanger for Geekvape.
The chip is not one I recognize though. Larger display and can adjust watts in TC mode.
I am surprised that none of the 'experts' out there have caught this.
It is basically a Dripbox 160 with a bigger case for bigger attys and a different bottom door.
The bottle Tube IS Kanger and so are the bottles.
The case even fastens together almost identically.
I do not like that the batteries fall out whenever you fill your bottle.
The little magnetic bottle door on the Kanger is a bit dinky but better imho.
I expect that the mod is made by Kanger for Geekvape.
The chip is not one I recognize though. Larger display and can adjust watts in TC mode.
I am surprised that none of the 'experts' out there have caught this.
Last edited:
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
LMAO most things tend to slip by
It should at least get Kanger styled squonk bottle and fill tube comments from reviewers like they do with Velocity Styled, Goon Styled, etc 
Maybe that only works if china copies not if other ....
Maybe that only works if china copies not if other ....
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
LMAO I don't think many people (myself included) ever had a drip box to compare lolIt should at least get Kanger styled squonk bottle and fill tube comments from reviewers like they do with Velocity Styled, Goon Styled, etc
Maybe that only works if china copies not if other ....
so sorry
jk but they are a decent dual batt squonk mod. Only for 22 mm attys though.
Funny, I haven't even been able to set up my Orca just yet and now I'm thinking about all kinds of squonkers with Star Wars insignias and designs... anyone know anyone who would make such a thing?
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
that is beyond what I was thinking. Body needs to be black with a white door!!!!I was thinking like a black one with the Empire crest, a Rebel one in orange, white, and black. A Boba Fett one with maroon and dark green with the Bounty Hunters' crest..
Sent from my iPhone using Tapatalk Pro
that is beyond what I was thinking. Body needs to be black with a white door!!!!
I was thinking like a black one with the Empire crest, a Rebel one in orange, white, and black. A Boba Fett one with maroon and dark green with the Bounty Hunters' crest..
Sent from my iPhone using Tapatalk Pro
Their pricing is as such...
PhantoHm BF RRP
## Paypal paid as F&F ##
- Phantohm Acetate panel 178€ + shipping
France 186€
EU 196€
Rest of the world 200€
- Phantohm Wood panel 202€ + shipping
France 210€
EU 220€
Rest of the world 224€
## Paypal paid as Goods ##
- Phantohm Acetate panel 178€ + shipping
France 195€
EU 205€
Monde 209€
- Phantohm Wood panel 202€ + shipping
France 220€
EU 230€
Monde 234€
Size: 73,5x24,5x42 mm
Last edited:
Goddamit. My already obsessive mind didn't need that to focus on.
Good thing my wallet makes the rules!
Sent from my iPhone using Tapatalk Pro
Todd says it best
32:00 - 35:00
32:00 - 35:00
I started a clone squonker thread...someone pointed out this box i never caught. http://www.3fvape.com/mechanical-mo...cal-box-mod-black-1-x-18650.html#.WU21ysko6BZ
Never thought it'd be so hard to sell the octo! I should just drop the price to $210 and see if it goes.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Good luck with that one! People are into disposable mods nowadays.....not the ones here, I guess. Overall. The Chinese clones invasion will erode whatever value there was in 3D printed and unless it is something that sets it apart, you're pretty much better off keeping it.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Did you try the ecf?
I sold my higher end stuff there.
Or maybe vapetrader?
BAM crew
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
The 510 is adjustable on the Geekvape squonker
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
All right Squonkaroos - back from vaycay and may just have to take this off of that Honda guy
Hey, what happened to the Odis 16 on it?
Frickin' love those little tiny atties...
Is there a place to order the mm bottles from the states.
Sent from my SHIELD Tablet K1 using Tapatalk
Sent from my SHIELD Tablet K1 using Tapatalk
still no proof that that it is not made by Kanger.
But a good improvement.
@KadlyDoWrong No offense here. Think he would have liked that.
On a side note: Right before he passed we had been making arraignments for him to ship it to me. So that I could repair the door Which he somehow managed to warp. And Replace the homemade battery holder with a sled. So I would like to extend the same offer to you. If you are willing. No charge for repairs just shipping. So if you agree just contact me for address. You can also send the your other one which I believe you mentioned had accidentally been left in a puddle of water?
And I will see if that can be restored. Sound Good?
On a side note: Right before he passed we had been making arraignments for him to ship it to me. So that I could repair the door Which he somehow managed to warp. And Replace the homemade battery holder with a sled. So I would like to extend the same offer to you. If you are willing. No charge for repairs just shipping. So if you agree just contact me for address. You can also send the your other one which I believe you mentioned had accidentally been left in a puddle of water?
And I will see if that can be restored. Sound Good?
I appreciate the offer, you are quite generous, and I will be in touch to make some arrangements though I think I'm going to play a bit with it first.@KadlyDoWrong No offense here. Think he would have liked that.
On a side note: Right before he passed we had been making arraignments for him to ship it to me. So that I could repair the door Which he somehow managed to warp. And Replace the homemade battery holder with a sled. So I would like to extend the same offer to you. If you are willing. No charge for repairs just shipping. So if you agree just contact me for address. You can also send the your other one which I believe you mentioned had accidentally been left in a puddle of water?
. Have fun. and contact when you are ready.
I just ordered from them as well. Keep in mind they take 1-5 days to process payment. My order status didn't move for 3 days so I emailed them and that's the response I got.
Sent from my iPhone using Tapatalk Pro
Bonkers for Squonkers FB group, is it related to this thread?
The MM refill kit looks great from them but $30USD to mail it to Canada... 
Good! Just wanted to warn you that they probably won't ship for a few days is all.
Sent from my iPhone using Tapatalk Pro
This is up for sale on a local group, looks dangerous or is there a mosfet buried somewhere? Anyone know what it is, 510 has a lip around it.
Not sure what brand it is. But If you could pry out the plate where the bottle goes I think you will find a mosfet under the small shelf on the bottom.
As for the 510 it could be one of the fancy ones with a removable and changeable plates or something as simple as a FatDaddy V4 ultimate which has a lip like that for 22mm atties to slide in no way to tell from image.
Much Thanks!
The seller doesn't know the name of it, here is the other picture he posted of the 510 and fire button.
Taking hanks tugboat out for a spin.
Sent from my iPhone using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Say hello to my newest squonker. Would anyone be offended if I name this one Spanky?
I named the Little Orca Minimal was making for Hank "Hanky Spanky"
gopher_byrd
Cranky Old Fart
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Incoming 
I just pulled the trigger on @Sonar505's squonker #1 http://vapingunderground.com/threads/for-sale-custom-wood-mods-by-sonar505.330305/ Will Wednesday ever get here? 
I just pulled the trigger on @Sonar505's squonker #1 http://vapingunderground.com/threads/for-sale-custom-wood-mods-by-sonar505.330305/ Will Wednesday ever get here? 
None of my vape stuff has names....
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
