Become a Patron!

Squonkers are Bonkers

1rudedog

1rudedog

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
DIYjim said:
I got a little thread over with the unlisted vendors: :) http://www.vapingunderground.com/threads/srs-mods.281972/
Click to expand...


goodluck but im sure i wont have any money to spend on vaping like i used to.ill be hacking up my own attys and using whatever cheap stuff i have already.hope i can quit soon but doesnt look promising...as id rather vape then smoke again.to much stress im my world atm to quit,although i have got my nic down to 2mg.goodluck man
 
1rudedog

1rudedog

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Hank F. Spankman said:
The authentic use a M2.5 pin. Not sure of the clones. (You'll have to file the tip & head of the pin a touch if you're using a Fatdaddy pin)
Click to expand...


i just hacked into a tohb atty and got a great vape outta it.i may take a lil more time with my next bf job,but it works so i dont really care much about anything else.thanks for the info man.the FD screws are way cheaper then spending crazy coin on attys done by others.just cant afford it anymore.i spents thousands over the last 3 yrs so i dont feel bad hackin up clones.
 
DIYjim

DIYjim

Bronze Contributor
Member For 4 Years
ECF Refugee
Unlisted Vendor
Just got my Eleaf Squeeze modded to my liking. First of all, DAMN is this thing tiny; almost too small. IMO, the Clapton coils suck that come with it- they take too long to ramp up which hurts battery life, and when they finally hit, it popped like crazy. Not good for me, so I built a dual 26 gauge nichrome setup @ .32 ohms and it ramps up immediately. Very nice! :) -As for the atty, it's much better than the Dripbox's but still needs improvement. I lathed off .100" off the bottom and .150" off the top to lower the air slots and reduce volume. This little bastard is pretty sweet now, and for $26 is pretty kickass, provided it lasts awhile. I still think the Coppervape is better as it is a pure mech with no circuitry to fail.

Pictured for size comparison is: Coppervape, Dripbox, Squeeze, and one of those SRS Mods I make.
WP_20161021_22_56_33_Pro.jpg
 
Hank F. Spankman

Hank F. Spankman

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
@DogMan
Look what was on IG
c4a9e6b497cfbfbdd3bda00f0a1731e7.png
 
inspects

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
1rudedog said:
could be worse im sure...so ill try to look at the good in my life.....my motorcycle is doing great....so thats good...lol.thanks for asking man.take care.
Click to expand...
Hey, whats more important than a bike?.....I can only think of a couple things......;)

I have one on order, which was supposed to be here last Friday, when I called Saturday they said I had the wrong Friday, although there is only one Oct 21st "Friday" in October I'm aware of...!
 
Hank F. Spankman

Hank F. Spankman

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Anyone heard anything from Focal after they ordered the O atty clone?
 
1rudedog

1rudedog

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
inspects said:
Hey, whats more important than a bike?.....I can only think of a couple things......;)

I have one on order, which was supposed to be here last Friday, when I called Saturday they said I had the wrong Friday, although there is only one Oct 21st "Friday" in October I'm aware of...!
Click to expand...

well havent had any "other things" so my bike is my new/old love!!!HAHAHAHAHA
since the OL split my bike has been the bright lite in my life.i hadnt been riding the bike at all since i was busy raising her son.so ive had to do ALOT of maintenance that had been neglected over the last 5 yrs.i had to get new front wheel bearings and races/ front lower motormount/front/rear shinko tires/some used air shocks cuz the old ones were worn ALL the way out!now she rides like a new one but maybe over the winter ima take the outer fairing off to fix a few spots on the inner fairing.a friend of mine had a newer bulb for my headlite and WOW the brightness on low and hi beam are UNREAL compared to the old one.my riding friend helped me out a LOT.he would buy ammo and other gun stuff i had so i could do all the above listed work and im runnin out of gun stuff to sell.id have never been able to do it all w/o him buying that stuff from me.hated sellin any gun stuffs but i only have 1 motorcycle and a couple of firework makers...so at least i had something to sell...or trade.had another friend thats a painter/body work guy and he fixed my one saddlebag that had a bad split in the fibreglass and he did that for 20$!! and in the end he wouldnt take the money.if ya saw what all he had to do you would know it woulda cost WAY more had he charged the regular price.i set him up with a vape setup so he could at least try to quit smoking.he primerd it and then spray canned it black but ya cant hardly tell at all.the guy is an artist with paint and fibreglass lemme tell ya!sorry for the rant but no new mods in my life so bike stuff it is!take care man
 
inspects

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
1rudedog said:
well havent had any "other things" so my bike is my new/old love!!!HAHAHAHAHA
since the OL split my bike has been the bright lite in my life.i hadnt been riding the bike at all since i was busy raising her son.so ive had to do ALOT of maintenance that had been neglected over the last 5 yrs.i had to get new front wheel bearings and races/ front lower motormount/front/rear shinko tires/some used air shocks cuz the old ones were worn ALL the way out!now she rides like a new one but maybe over the winter ima take the outer fairing off to fix a few spots on the inner fairing.a friend of mine had a newer bulb for my headlite and WOW the brightness on low and hi beam are UNREAL compared to the old one.my riding friend helped me out a LOT.he would buy ammo and other gun stuff i had so i could do all the above listed work and im runnin out of gun stuff to sell.id have never been able to do it all w/o him buying that stuff from me.hated sellin any gun stuffs but i only have 1 motorcycle and a couple of firework makers...so at least i had something to sell...or trade.had another friend thats a painter/body work guy and he fixed my one saddlebag that had a bad split in the fibreglass and he did that for 20$!! and in the end he wouldnt take the money.if ya saw what all he had to do you would know it woulda cost WAY more had he charged the regular price.i set him up with a vape setup so he could at least try to quit smoking.he primerd it and then spray canned it black but ya cant hardly tell at all.the guy is an artist with paint and fibreglass lemme tell ya!sorry for the rant but no new mods in my life so bike stuff it is!take care man
Click to expand...
Rick, sounds like things are beginning to come together, in more ways than one.....I hope things continually go in your direction, you've had a tough year...!
 
rockettj

rockettj

Hank F. Spankman said:
I ordered on the 10th. They said it was shipping around the 22nd. I paid for tracking & "box packaging". Didn't get an email except for the PayPal confirmation.
Click to expand...
i ordered on the 8th myself w/tracking and haven't heard anything either. still listed as "collecting product" and priority status. i'm not surprised by anything that happens at f/c, can't figure them out, but i'm sure it'll be here soon. now i'm wanting the hadaly to become available by them.
 
Hank F. Spankman

Hank F. Spankman

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
rockettj said:
i ordered on the 8th myself w/tracking and haven't heard anything either. still listed as "collecting product" and priority status. i'm not surprised by anything that happens at f/c, can't figure them out, but i'm sure it'll be here soon. now i'm wanting the hadaly to become available by them.
Click to expand...

The Hadaly WAS available from VaporDNA, $62isj with code JOE10. I wish I'd known it sooner. I'da ordered one ASAP lol
 
DogMan

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
KentA said:
That's why I order from fasttech when I have the choice. They seem to have a better system.
Click to expand...
And the $2 shipping upgrade is an actual upgrade. 9 days to here.

Focal charge for tracking, when parcels can be tracked anyway without paying the upgrade. To increase speed to here is $16

Sent from my LG-H815 using Tapatalk
 
kross8

kross8

Silver Contributor
Member For 4 Years
DIYjim said:
Just got my Eleaf Squeeze modded to my liking. First of all, DAMN is this thing tiny; almost too small. IMO, the Clapton coils suck that come with it- they take too long to ramp up which hurts battery life, and when they finally hit, it popped like crazy. Not good for me, so I built a dual 26 gauge nichrome setup @ .32 ohms and it ramps up immediately. Very nice! :) -As for the atty, it's much better than the Dripbox's but still needs improvement. I lathed off .100" off the bottom and .150" off the top to lower the air slots and reduce volume. This little bastard is pretty sweet now, and for $26 is pretty kickass, provided it lasts awhile. I still think the Coppervape is better as it is a pure mech with no circuitry to fail.

Pictured for size comparison is: Coppervape, Dripbox, Squeeze, and one of those SRS Mods I make.
View attachment 64518
Click to expand...
i like that atty you have on the far right squonk box,, wouldnt mind trying that one on the pico squeeze
ps--nice work on the mod you made! :)
 
kross8

kross8

Silver Contributor
Member For 4 Years
1rudedog said:
well havent had any "other things" so my bike is my new/old love!!!HAHAHAHAHA
since the OL split my bike has been the bright lite in my life.i hadnt been riding the bike at all since i was busy raising her son.so ive had to do ALOT of maintenance that had been neglected over the last 5 yrs.i had to get new front wheel bearings and races/ front lower motormount/front/rear shinko tires/some used air shocks cuz the old ones were worn ALL the way out!now she rides like a new one but maybe over the winter ima take the outer fairing off to fix a few spots on the inner fairing.a friend of mine had a newer bulb for my headlite and WOW the brightness on low and hi beam are UNREAL compared to the old one.my riding friend helped me out a LOT.he would buy ammo and other gun stuff i had so i could do all the above listed work and im runnin out of gun stuff to sell.id have never been able to do it all w/o him buying that stuff from me.hated sellin any gun stuffs but i only have 1 motorcycle and a couple of firework makers...so at least i had something to sell...or trade.had another friend thats a painter/body work guy and he fixed my one saddlebag that had a bad split in the fibreglass and he did that for 20$!! and in the end he wouldnt take the money.if ya saw what all he had to do you would know it woulda cost WAY more had he charged the regular price.i set him up with a vape setup so he could at least try to quit smoking.he primerd it and then spray canned it black but ya cant hardly tell at all.the guy is an artist with paint and fibreglass lemme tell ya!sorry for the rant but no new mods in my life so bike stuff it is!take care man
Click to expand...
if your headlight is white/foggy.. this winter take it off and into the house. put a bucket of soapy water under it,, turn on the tv. get yourself some 600,,, all the way up to 2500-3000 grit sandpaper, slowly work your way up from 600 grit to your highest paper, when you get the light perfect get it completely dry,,, take it outside and use high gloss clear coat in a spray can,,,,,make sure its the UV protected one........major dif in light output and looks.

cheer up,,, better things in store for you :)
 
MyMagicMist

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
Spanky, panky, spanky, panky!

* sitting here lost in room full of mist and cloud, only a big wide grin is visible *

I am now Sith Overlord. I has the power of Coppervape + Velocity V2, my schwartz is ever infinite and super cloudy potent. This might not be legal. *points to face* Look like it gives a fuck? :)
Reiterating that, look like it minds?
 
MyMagicMist

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
Wow! :) I am quite happy with the Coppervape mod. It is very ergonomically designed and well machined. I bought a spare repair kit just in case it's needed. Seems rather sturdy but I know how life and entropy go. If it's built it's meant to degrade, break down. Will be ordering another Coppervape mod a.s.a.p.

Have lost desire for the Reo type of nods. This is due to lacking ergonomics of the Reo types. I need to stop, find the square hole on the side and thumb it. The Coppervape style lets me simply clutch and squeeze while continuing to vape, requiring no real thought. The Reo style also use a 6ml bottle, the Coppervape a 10ml. I can vape a week on a 10ml bottle compared to three days on a 6ml.

I'll keep hold of the two Reo clones for backups. Also have a couple of Itatze and a Smok M22 for some regulated vaping if desired, though not sure why I would desire. My MVP 2 finally went kaput, the positive end got shorted. Wife is using as a spare battery pack for her phone and tablet.

Sorry if it seems I write an advertisement for Coppervape. I merely wanted to express my happiness in now using the product, and rationale for that. Well y'all run 'er slow. *hugs all around* :)
 
DogMan

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
It was the atrocious loss of voltage that put me off REOs more than ergonomics.

That, and I'm a "button masher" so used to frequently snap the weak positive contacts.

Rob finally released the harder contacts about a week after i PIF my last reo lol

Sent from my LG-H815 using Tapatalk
 
You must log in or register to reply here.

VU Sponsors

Top