Mybe a Vandy Vape Mesh RDA...You knew I was going to suggest it right?
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
You and BB with the mesh thing.
I am not even sure if you are serious about it...
I think most normal people hate waiting.When I messaged FT's CS, they told me they don't know when it will come in but usually between 10-20 days. And since the other tank I want to get for my Aegis is also on preorder, I guess it's not really that big of a deal to wait for it. But I hate waiting.
However the fake people don't seem to mind.And by fake yes I mean (Millennials)
That odis 16 shows up again. Might just buy an authentic one.
Or the "Bliss" (gloom, but in white - they're pretty
)
I was seriously considering it, to be honest. Just couldn't pull the trigger on it.
I have watched reviews on the mesh attys and the cable RDTA's and such.
I came away from all of them with WHY?
I have some mesh in case I ever want to play with it but will prolly use it in a h*rb pipe someday
Hey now! I resemble that remark. Seriously, it is not a bad atty, especially since you don't have to trap coil leads, single or dual, regular or notch coils and mesh to boot! Putting a coil in this thing is about as hard as pointing to the ground.
On a different note, Mr. Hadaly and I were aquainted but not getting a great vape from it made me give it the stink eye. I was remembering some @Train said, so I put a 3mm ID, 26g SS coil in it, followed @JuicyLucy's lead and closed the air to one hole and finally, used a narrowe drip tip. We are good buddies now.
Wait...Mike Vapes has made an RDA???
This I need to see toss me a link.
I have watched reviews on the mesh attys and the cable RDTA's and such.
I came away from all of them with WHY?
I have some mesh in case I ever want to play with it but will prolly use it in a h*rb pipe someday
The main thing that keeps me from giving it a shot is the need to buy mesh for it if I like it. Like I need one more complication in my life.
Mike vapes Icon RDA
Argh. My cart has an Ample Pixy RDTA, Wasp Nano RDA, Soul S RDA clone, Gorge RDA clone, Flave RDA clone, Therion 75C, a set of hex wrenches and various other bits and bobs. It's sitting right at $200.68. *sigh* If I get all of that, it will use up the entirety of my birthday money, which is making it hard to pull the trigger but I don't know what I would remove as it may be a long time before I can buy anything else (like Christmas maybe). Someone make me do it please.
Trendy, spendy, but it's makin' me happy.
I usually wait...like a year...before I buy the "newest" stuff - but this gear (mods and atties) just checked a bunch of boxes, so I dove in early.
All of it is working perfectly - great great vape, from the first build, no fiddling at all...
I usually wait...like a year...before I buy the "newest" stuff - but this gear (mods and atties) just checked a bunch of boxes, so I dove in early.
All of it is working perfectly - great great vape, from the first build, no fiddling at all...
Well it could be worse.
My wife just reminded me that Oct 3rd is her birthday...Fuck me running there goes my vape budget.
Or just run out to mailbox in the buff real quick.
Umm a 30 minute drive to "the mailbox".
This is why I tell my wife everything.It saves time and we have fewer arguments.Now I have to worry he will look inside and see the invoice
Most wives know everything anyway.
But they like it when you fess up and tell them anyway.
Indeed
Thanks and bookmarked
Hmm Interesting
Cheaper than the Molly to boot. You can give them a design to make it your own also to have engraved on the back side... Like this one here from a user named Nina...
This one looked really nice imo...
This one was pretty Wild looking
Crazy Stab one...
And they fit 24's...so those 22's with the beauty rings will look good.
I think I am going to order one when they are available, and start some dialogue with the modder... have 8500 pennies saved up
just need another 6000 hahaEDIT: They have White Delrin also! oogles
Last edited:
This reminds me to order some sushi soonI'm really liking the DPro from CoilArt. Nice flavor and air flow. Another is the Zion from Armageddon. Here is the DPro on my Vorbfish
(Its a front squonk Crommie)
Sent from my iPhone using Tapatalk Pro
I'm very serious about it.
Seeing the review Tony B. did on it is what made me rethink getting back into RDA's & going the squonking route!
Why...Super easy to coil up.No wrapping coils required at all.And if I want use a coil it can handle that as well.I'll just buy pre-built 1's and some cotton.I have watched reviews on the mesh attys and the cable RDTA's and such.
I came away from all of them with WHY?
I have some mesh in case I ever want to play with it but will prolly use it in a h*rb pipe someday
My thoughts exactly.
I hear they take lots of power to run though?
Hmm it seems (Vandy Vapes) is doing a few collaborations.
Speaking of collaborations...Enjoy!
It's like all the other rdas, the power requirements depend on the build. I had it on a Therion. The Wraith can power it in power mode but the Therion was better. I guess if I had something higher than 0.3 ohms in it, the Wraith would've been fine.
Well it was just a thought.
A very naughty thought yes.
I'm still allowed those even at my age...Cheers!
The only things keeping me away are the side squonk and the fact they are mechs. They are beautiful tho.Cheaper than the Molly to boot. You can give them a design to make it your own also to have engraved on the back side... Like this one here from a user named Nina...
View attachment 92322
This one looked really nice imo...
View attachment 92323
This one was pretty Wild looking
View attachment 92324
Crazy Stab one...
View attachment 92326
And they fit 24's...so those 22's with the beauty rings will look good.
I think I am going to order one when they are available, and start some dialogue with the modder... have 8500 pennies saved up
EDIT: They have White Delrin also! oogles
View attachment 92336
Very nice especially that stabwood 1Cheaper than the Molly to boot. You can give them a design to make it your own also to have engraved on the back side... Like this one here from a user named Nina...
View attachment 92322
This one looked really nice imo...
View attachment 92323
This one was pretty Wild looking
View attachment 92324
Crazy Stab one...
View attachment 92326
And they fit 24's...so those 22's with the beauty rings will look good.
I think I am going to order one when they are available, and start some dialogue with the modder... have 8500 pennies saved up
EDIT: They have White Delrin also! oogles
View attachment 92336
That Haku/Half combo is my unicorn setup! Incredijelly right now!
Sent from my iPhone using Tapatalk Pro
Yeah the mesh wire might but you could pop a single pre-built kanthal coil in it.
My bad.STOP IT! I already went over budget.
But you did ask for encouragement earlier.
Just consider me (The Advocates Devil)
yeah but I would get better performance out of an atty designed for round coils...
that thing is made for a covered wagon coil. Not exactly a tight flavor chamber for a round coil build.
More like the devil himself.
Did you see the list of shit I bought? I got a ton of stuff coming sometime in the near-ish future. 
Or the "Bliss" (gloom, but in white - they're pretty
Didn’t know they started making them in white
Keep in mind the easier something is the more I would use it.
Which is why I went the whole (Non-RDTA Tank) route in the first place.Most of the teeny little RDA/RDTA/WHATEVER are not going to do me much good as they would cause my hands to flare up.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Wow, this bitch runs hot, which is why I added the teeny ultem chuff
Flavor is rich, a tad airy, but the air is flavorful
Fairly easy to build
I saw it after posting what I did...But me a devil?More like the devil himself.
Nah more like...Well!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Sorry to bust your fantasy but: no delivery in my town
Two roads up from me, and you can get delivery to boxes along the highway but it takes about three days longer than the PO box in town