That was me.
I used an automotive finishing polish.
It's not 100% clear but it came out pretty nice.
Sent from a Galaxy far far away!
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
I used an automotive finishing polish.
It's not 100% clear but it came out pretty nice.
Sent from a Galaxy far far away!
The Pulse 22 is an awesome RDA.
I was the same as you, thinking there's no way this thing is going to be as good as some of my dual coil 24s.
The first vape on the Pulse 22 proved that wrong.
Sent from a Galaxy far far away!
Yes or the god will bless you if you share this with 10 friends....
What would god need with internet?
So yes I guess lots of FB hate here after all?
Just not for the FB vape merchandising ones?
Just not for the FB vape merchandising ones?
I won't go near it. Or the twitters or the Instagrams
I did use FB for a short while after the wife badgered me into it.
Never even been to those other sites at all.
Only for the ones that seems reasonable. After that bail out of those groups lol. Like the entheon wouldn't mind grabbing, but we'll see. I want to focus on grabbing a upgrade squonk mod. I'm looking to peorder that ijoy squonk. But just don't like the bulky look of it.
And unless you use the good 20700 battery it is no better than having a 30Q in it.
I was tempted and would order one if the had a slightly smaller one in 18650.
I like Facebook.
5 years ago my oldest daughter talked me into installing it, at first I was totally against it.
Once I started using it I reconnected with friends iv hadn't been in contact with for years.
And yes there will always be those annoying posts about so and so is eating dinner at Jack in the box, I just ignore them.
I have a hard fast rule...
I will not discuss Politics or Religion. I won't post about either or reply to posts about either subject.
I have my views on both subjects and that is exactly what they are, My Views!
Sent from a Galaxy far far away!
5 years ago my oldest daughter talked me into installing it, at first I was totally against it.
Once I started using it I reconnected with friends iv hadn't been in contact with for years.
And yes there will always be those annoying posts about so and so is eating dinner at Jack in the box, I just ignore them.
I have a hard fast rule...
I will not discuss Politics or Religion. I won't post about either or reply to posts about either subject.
I have my views on both subjects and that is exactly what they are, My Views!
Sent from a Galaxy far far away!
Oh nice what did you get?Finally got my 1st squonker from 3f in the vape mail
View attachment 94314
Some day the zero clone from FT will show up... been 2 months so far
So you're saying you ain't saying...Gotcha!Yep, sure that'll work too. Had other stuff in mind but didn't say exactly, leaving it open for ambiguity's sake in order to not say exactly.
My brother in law just kept parroting that stupid commercial.
"Still blowing smoke"
I sat him down and calming explained to him the difference.He decided to be a jackass and then I told.You don't like it there's the door.He shut up after that.
My way of saying that is "Don't let the door hit you where the Good Lord split you".
That's good to hear. I'd rather have the single coil 22 but have seen where others sing the praise of the 24 vs 22. Don't want both
I have a huge favor to ask of someone. I have been trying to order this https://gingervaper.com/product/boxer-bf-mech-replacement-510-pin-assembly/
From the gingervaper and I keep receiving an error during checkout. If someone whom has successfully checked out from this site can explain what they did differently or even make the purchase and ship it to me. I will obviously cover the payment and some extra for the trouble. I really need this part for my boxer 18650 squonker.
From the gingervaper and I keep receiving an error during checkout. If someone whom has successfully checked out from this site can explain what they did differently or even make the purchase and ship it to me. I will obviously cover the payment and some extra for the trouble. I really need this part for my boxer 18650 squonker.
Finally got my 1st squonker from 3f in the vape mail
View attachment 94314
Some day the zero clone from FT will show up... been 2 months so far
That one is on the to do list. Please let us know how it works for you. Tomorrow I'm ordering the YFTK Punto Zero. I'm digging the Mosfet mods.
If you only want one or the other for mostly flavor I'd definitely recommend the pulse 22. Update on your doors..... I'm having a little issue with my more expensive 3d printer! So I dusted off my el cheapo and printed this door this morning. I don't think you'll like this see through red filament but it was already in there and I was only testing it out. I'll print the solid red in a few mins when I go dig out my other red spool lol. The other red seemed kinda red/orange anyways. (I have a lot of filament if you couldn't tell)That's good to hear. I'd rather have the single coil 22 but have seen where others sing the praise of the 24 vs 22. Don't want both
Sent from my SM-G955U using Tapatalk
It shows finger prints and scratches pretty badIt's really not that bad
Sent from my SM-G955U using Tapatalk
Gonna have to break out Sketchup and draw up a BAM design
It will export .stl files
BAM? Got it going again... here's a pic of my lab, my mess up pile lol and the new red I just took out.Gonna have to break out Sketchup and draw up a BAM design
You can see the other "red" in the mess up pile. Doesnt look completly red to me.
Sent from my SM-G955U using Tapatalk
I use FB a lot. I use it to keep in touch with kith and kin, to read news I wouldn't be exposed to otherwise, to discuss views contrary to my own to learn new things. I discuss politics and religion a lot. And share a shit ton of animal-related stuff.
Yeah like I said I have a lot of filament! Lol I even have some poor man's alumide, witch is Aluminum mixed with pla instead of nylon.
Sent from my SM-G955U using Tapatalk
So basically your saying no one here should ever send you a friend request? Lol jk I promise.I use FB a lot. I use it to keep in touch with kith and kin, to read news I wouldn't be exposed to otherwise, to discuss views contrary to my own to learn new things. I discuss politics and religion a lot. And share a shit ton of animal-related stuff.
Sent from my SM-G955U using Tapatalk
I was trying to tinker with some design software but stopped. Really really wish I was better with computers. I can definitely use them and even built one last year but some of the software and other technical stuff I got lost in. Probably because I kinda skipped the whole beginning BOOM of computers and the internet getting so big in the early 2000's.
I will try Autodesk fusion 360 again soon though.
Sent from my SM-G955U using Tapatalk
So basically your saying no one here should ever send you a friend request? Lol jk I promise.
Sent from my SM-G955U using Tapatalk
Oh, they can. They just need to know what to expect.
Oh, I also do a LOT of movie quotes.
"It is by will alone I set my mind in motion. It is by the juice of Sapho that thoughts acquire speed, the lips acquire stains, stains become a warning. It is by will alone I set my mind in motion."
"It is by will alone I set my mind in motion. It is by the juice of Sapho that thoughts acquire speed, the lips acquire stains, stains become a warning. It is by will alone I set my mind in motion."
Oh, I also do a LOT of movie quotes.
"It is by will alone I set my mind in motion. It is by the juice of Sapho that thoughts acquire speed, the lips acquire stains, stains become a warning. It is by will alone I set my mind in motion."
Dune, great movie!
Sent from planet Krypton
They are both great mods at the price... But the 510 sucks! It's extremely frustrating.. It's a manually adjustable from the top and never seems to stay in place. I just sold both because i moved to all 2x700 but i replaced the 510 on the dna75 with a Varitube squonk 510. The MM510 did not fit FYI
OH OH I know that movie!Oh, I also do a LOT of movie quotes.
"It is by will alone I set my mind in motion. It is by the juice of Sapho that thoughts acquire speed, the lips acquire stains, stains become a warning. It is by will alone I set my mind in motion."
The Worm movie.
Children of dune is good as well.
I have the 22 and I love it. It's easy, single coil, airflow is on point. 24 is somewhat build for dual coils imo. You can fit in a single coil but the chamber be so airy from the tubes bring further way. ImoThat's good to hear. I'd rather have the single coil 22 but have seen where others sing the praise of the 24 vs 22. Don't want both
22 it is then!
AndriaD
Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Trying to sell stuff?
Little Squonk porn..... Ti Flav 22 on a Ti-CC mod and a Entheon on a SS-CC
I made some custom tips for them because the included drip tips are waaaay too short for my liking
I made some custom tips for them because the included drip tips are waaaay too short for my liking
cool, mod is in the States as of this morning. Hopefully I get it tomorrow or Saturday
BAM? Got it going again... here's a pic of my lab, my mess up pile lol and the new red I just took out.
You can see the other "red" in the mess up pile. Doesnt look completly red to me.
Sent from my SM-G955U using Tapatalk
love my CR-10. I just need an i3 to go with it
This makes me feel good about ordering from them now
Thanks for the guinea pig purchase!
This makes me feel good about ordering from them now
Thanks for the guinea pig purchase!
lol
2 days to go from France to the local post office where it will sit for a week before it goes out to me
edit: think they're the only official seller for 67 so I would hope they're legit. Maybe I'll end up with a brick in a box
Bought the robo thinking it'd be a big upgrade but all it's really been is disappointing. Makes no sense because sometimes it prints perfect.
Sent from my SM-G955U using Tapatalk
looks like moisture in the filament or one of the belts is slipping
Filaments brand new, not that it means it's not it and the belts are all visable and I can't see anything going on. The printing nerd made a few vids on this printer and how it has some problems the manufacturer is supposed to take care of. Fingers crossed....
Sent from my SM-G955U using Tapatalk
You have any neon/lime green type color?If so,i may have to throw some money at ya haha.I've got files for a door and button i want in that green,but can't find a place that has it.
I don't sorry, I do want to experiment with dying my clear resin from my sla printer though. Only thing that sucks about experimenting with that resin is that it costs $120 a box.
Sent from my SM-G955U using Tapatalk