Become a Patron!

Squonkers are Bonkers

troydestroy

Silver Contributor
Member For 4 Years
If you held off on getting that 528 driptech now is the time... 40% off!
1d9b3874b723680fbe2c34a86c857bd5.jpg
 

ben73

Gold Contributor
Member For 4 Years
There's a YFTK clone of Scar available so you can try it out before you waste any real cash.

I've noticed that some RDAs seem to never get reviewed I was trying to find a review on the Crafter's Den Pocket RDA for ages and still nothing ...strange!

Sent from my Redmi Note 4 using Tapatalk
The Pocket RDA (clone) is great been using it for several weeks every day now its been my daily atty ,
very similar to Narda just easier setup on the posts can get quite warm tootin away so i use the driptip off the byKa v6 with it has a longer Plastic tip
Its a low top cap so you need to make sure coil is mounted right height for allowing airflow under over it without touching base top cap basically same as Narda id say there close but slightly different than each other,
Other than that im really enjoying it ,
if you like the middle ( restrictive type draws not too loose or too tight)
46a5f8cb22b0fc03961e4ca254423f13.jpg


Sent from my ONEPLUS A3003 using Tapatalk
 

jcash74

Gold Contributor
Member For 5 Years
Just placed an order. Thanks for the link, I appreciate new concentrates! I got the cwc and some cheesecake.

I've been using DIYorDie concentrates so far and have found some good ones.

Bronuts - is a chocolate glazed donut (I get more chocolate than glaze but I do enjoy it with coffee!) This and obsidian are a couple of my favorites!

Rose Milk - a strawberry creme/milk (I get a light strawberry and a heavier milk/creme) it's good and light another nice refreshing juice after using my adv mixes.

Obsidian - caramel, light tobacco, Graham cracker and cookie dough (I get a nice caramel with some tobacco and the Graham cracker has a little hint in there as well. This one has quickly become one of my adv) Note: he left some room in this mix to add something of your own. I don't have any flavorings but added a little Bronuts to the top. I think it was around 3% to my mix of obsidian. It's good so far and I'll report once I actually fill a squonker with it and place a fresh build in the hadaly.

Triple C's - caramel cake with butterscotch and vanilla cream (I get more caramel than butterscotch but another great vape with coffee)

Rhodonite - raspberry and apple macron (I get a nice blend of raspberry and apple with a light bakery note) I really enjoy this juice and it is very refreshing after using my other juices alot.

I think that's all I've tried so far. The profiles might be a little off of what Wayne has listed.
http://www.ecigexpress.com/shop/diy-e-liquid/one-shot-concentrates/diyordie-concentrates.html
 
Last edited:

R3alJim Shady

Platinum Contributor
Member For 4 Years
Just placed an order. Thanks for the link, I appreciate new concentrates! I got the cwc and some cheesecake.

I've been using DIYorDie concentrates so far and have found some good ones.

Bronuts - is a chocolate glazed donut (I get more chocolate than glaze but I do enjoy it with coffee!)

Rose Milk - a strawberry creme/milk (I get a light strawberry and a heavier milk/creme)

Obsidian - caramel, light tobacco, Graham cracker and cookie dough (I get a nice caramel with some tobacco and the Graham cracker has a little hint in there as well. This one has quickly become one of my adv)

Triple C's - caramel cake with butterscotch and vanilla cream (I get more caramel than butterscotch but another great vape with coffee)

Rhodonite - raspberry and apple macron (I get a nice blend of raspberry and apple with a light bakery note)

I think that's all I've tried so far. The profiles might be a little off of what Wayne has listed.
http://www.ecigexpress.com/shop/diy-e-liquid/one-shot-concentrates/diyordie-concentrates.html

Nice! Do you find these flavor concentrates to be more cost effective than blending your own individual flavors? Seems like it would be way more efficient too.


Sent from my iPhone using Tapatalk Pro
 

troydestroy

Silver Contributor
Member For 4 Years
Squonkers can you help???

It's coming time to start putting out hay for the cows and I'm needing an AIO that's sturdy, cheap, portable and rebuildable for use in the tractor... (Probably do nic salts to cut down usage) Preferably one that can be capped off and thrown in a pocket. I've looked at the Aspire Breeze and it's a strong contender except not rebuildable... Is there anything out there or am i better off with a Pico and a kfl or something of the like?
TIA!
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
Squonkers can you help???

It's coming time to start putting out hay for the cows and I'm needing an AIO that's sturdy, cheap, portable and rebuildable for use in the tractor... (Probably do nic salts to cut down usage) Preferably one that can be capped off and thrown in a pocket. I've looked at the Aspire Breeze and it's a strong contender except not rebuildable... Is there anything out there or am i better off with a Pico and a kfl or something of the like?
TIA!

I’ve got a Goblin Mini V2 built with a single coil ohming out to .95 and a COV Mini Volt that I plan to use for that express purpose. Got that Goblin Mini AFC closed down tight!


Sent from my iPhone using Tapatalk Pro
 

troydestroy

Silver Contributor
Member For 4 Years
I’ve got a Goblin Mini V2 built with a single coil ohming out to .95 and a COV Mini Volt that I plan to use for that express purpose. Got that Goblin Mini AFC closed down tight!


Sent from my iPhone using Tapatalk Pro
Yeah, I'm thinking one of those AIO devices will be a PITA... Not to mention cost of coils. Anyone recall that small mod, similar chip to a Pico squeeze that is a side by side with a cage around the tank... Think it's made by Tesla...


Found it... Tesla stealth
https://www.myvaporstore.com/Tesla-Stealth-100W-Mod-p/tes-st10.htm
 

SteelDriver

Gold Contributor
Member For 4 Years
It sure does, but for that money I could get a bucket full of Pico Squeeze! I'm using mostly the Therions so I may look again at the Geek Vape....
I ordered a vt this morning could not pass up 55 for dna75. Now I'll have a regulated again.

Sent from my LG-D850 using Tapatalk
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
It squonks on the front.......

Sent from my LG-D850 using Tapatalk
That is side.

VU seems to use opposite terminology to elsewhere.

It's a mixed up mess which is front and side. Context dependant which people are speaking of.

I prefer "REO style" or "dibi style" since it leaves no question marks
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
Squonkers can you help???

It's coming time to start putting out hay for the cows and I'm needing an AIO that's sturdy, cheap, portable and rebuildable for use in the tractor... (Probably do nic salts to cut down usage) Preferably one that can be capped off and thrown in a pocket. I've looked at the Aspire Breeze and it's a strong contender except not rebuildable... Is there anything out there or am i better off with a Pico and a kfl or something of the like?
TIA!
Nic salts are poorly absorbed, you'll use more nic salt to satisfy than alkaline nic
 

SteelDriver

Gold Contributor
Member For 4 Years
That is side.

VU seems to use opposite terminology to elsewhere.

It's a mixed up mess which is front and side. Context dependant which people are speaking of.

I prefer "REO style" or "dibi style" since it leaves no question marks
Luna squonks on front fires on side

Sent from my LG-D850 using Tapatalk
Oh I got you nm lol
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
Nic salts are poorly absorbed, you'll use more nic salt to satisfy than alkaline nic

Really? I’ve been reading that the body absorbs them more efficiently which leads to you feeling satisfied quicker.


Sent from my iPhone using Tapatalk Pro
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
Really? I’ve been reading that the body absorbs them more efficiently which leads to you feeling satisfied quicker.


Sent from my iPhone using Tapatalk Pro
No. There is that myth, mostly perpetuated by people who have never tried them reading on the internet.

Are you making your own from regular nic? Just need enough citric acid to neutralise the PH
 

crazydmnd

Gold Contributor
Member For 5 Years
Squonkers can you help???

It's coming time to start putting out hay for the cows and I'm needing an AIO that's sturdy, cheap, portable and rebuildable for use in the tractor... (Probably do nic salts to cut down usage) Preferably one that can be capped off and thrown in a pocket. I've looked at the Aspire Breeze and it's a strong contender except not rebuildable... Is there anything out there or am i better off with a Pico and a kfl or something of the like?
TIA!
Do yourself a favor and get a billetbox, sxk clone or genuine, they are almost indistinguishable. I've had many mods over the last 5 years, many AIOs, and the billet box has been the best since gen 1.

I can't think think of any other that can beat it in terms of performance, convenience, and especially durability. You can literally drive over it with your Massey Ferguson and it prob won't have so much as a scratch.

In fact , your requirements are the exact same reason the dude invented it.

I LOVE mine!



Sent from my SM-G935V using Tapatalk
 

crazydmnd

Gold Contributor
Member For 5 Years
Do yourself a favor and get a billetbox, sxk clone or genuine, they are almost indistinguishable. I've had many mods over the last 5 years, many AIOs, and the billet box has been the best since gen 1.

I can't think think of any other that can beat it in terms of performance, convenience, and especially durability. You can literally drive over it with your Massey Ferguson and it prob won't have so much as a scratch.

In fact , your requirements are the exact same reason the dude invented it.

I LOVE mine!



Sent from my SM-G935V using Tapatalk
Aaand I just saw this is the squonker post...

Well this one is very good and super tough, entire body is solid Delrin. It's a li-mo.

b19054c4e306bddc0b0370909d1ad07f.jpg


Sent from my SM-G935V using Tapatalk
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
No. There is that myth, mostly perpetuated by people who have never tried them reading on the internet.

Are you making your own from regular nic? Just need enough citric acid to neutralise the PH

So you have an article or something or is this your opinion based on experience? Not arguing, just curious.

I’ve used them for a couple of months now and I’m finding it to be true. I still use freebase for my DIY juice so I have a basis for comparison. Could be a placebo effect.


Sent from my iPhone using Tapatalk Pro
 

troydestroy

Silver Contributor
Member For 4 Years
Do yourself a favor and get a billetbox, sxk clone or genuine, they are almost indistinguishable. I've had many mods over the last 5 years, many AIOs, and the billet box has been the best since gen 1.

I can't think think of any other that can beat it in terms of performance, convenience, and especially durability. You can literally drive over it with your Massey Ferguson and it prob won't have so much as a scratch.

In fact , your requirements are the exact same reason the dude invented it.

I LOVE mine!



Sent from my SM-G935V using Tapatalk
Ya know, you might be onto something there... Was looking for a little more portable (light weight) but i once had the sxk 70w(poor chip imo) and loved much about it besides the chip. Think I'll look for a sale on the dna60 version! Thanks!
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
So you have an article or something or is this your opinion based on experience? Not arguing, just curious.

I’ve used them for a couple of months now and I’m finding it to be true. I still use freebase for my DIY juice so I have a basis for comparison. Could be a placebo effect.


Sent from my iPhone using Tapatalk Pro

i've seen an article or two, but am really bad at keeping records

salts are good to use high MG, because they give less throat hit, so people can increase nic, which is their advantage
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
Aaand I just saw this is the squonker post...

Well this one is very good and super tough, entire body is solid Delrin. It's a li-mo.

b19054c4e306bddc0b0370909d1ad07f.jpg


Sent from my SM-G935V using Tapatalk

the ultem version will be sturdier. I think delrin is $200, ultem $300

you'll likely see all the delrin maintenance questions if you join the group
 

Sonar505

Silver Contributor
Member For 4 Years
Member For 3 Years
Modder
Lol. That was my point. I've been confused with which is front which is side for years.

Me too and what makes it worse for me is trying to ask someone where they want the squonk hole put when I am making a custom squonker for them.:headbang:

One thing that struck me strange on that video was his naming them as left hand and right hand. I don't know about the rest of you but I tend to switch the mod from my left to right and back again hands all day long no matter where the squonk hole is. Am I the only one that does not keep it in the same hand all the time?
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
Me too and what makes it worse for me is trying to ask someone where they want the squonk hole put when I am making a custom squonker for them.:headbang:

One thing that struck me strange on that video was his naming them as left hand and right hand. I don't know about the rest of you but I tend to switch the mod from my left to right and back again hands all day long no matter where the squonk hole is. Am I the only one that does not keep it in the same hand all the time?

i do that too, but do favour my left [right for coffee cup etc]

john is a lefty, so i think he was just always sick of modders assuming right handedness?
 

~Don~

Platinum Contributor
Member For 5 Years
White molly v2 on its way to this guy

Sent from my SM-G950U using Tapatalk

I passed on them myself...Love the Molly, like the improvements of the V2, but not enough change to warrant a new one yet. Trying to lobby Ludovic in giving one to Stefan for free lol

Very curious who will win the free V2 though. A lot of people joined the group just for that, which is sort of shitty...nearly 1000. Hopefully he sees the trashcan accounts who joined just for the giveaway.
 

derrickfosgate

Gold Contributor
Member For 4 Years
I passed on them myself...Love the Molly, like the improvements of the V2, but not enough change to warrant a new one yet. Trying to lobby Ludovic in giving one to Stefan for free lol

Very curious who will win the free V2 though. A lot of people joined the group just for that, which is sort of shitty...nearly 1000. Hopefully he sees the trashcan accounts who joined just for the giveaway.
Yea i noticed that as well when is he runnin the giveaway anyways? Iv wanted a molly dont have one yet so why not the v2 now i must let my orca go to make room

Sent from my SM-G950U using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
Thought about that but iv aquired 5 mods in 2 months misses is not to happy

Sent from my SM-G950U using Tapatalk

You broke the rule then huh? Mod for you...must have something delivered for her... Mod buying 101 my dude!

Wife: What is that another mod, my goodness!

You: This came for you btw!

Wife: forgets about mod and is happy with item you got her.

You: WIN!
 

crazydmnd

Gold Contributor
Member For 5 Years
the ultem version will be sturdier. I think delrin is $200, ultem $300

you'll likely see all the delrin maintenance questions if you join the group
Ya I would love to have gotten the ultem version but when I ordered mine the black ultem was all that was available on the next batch. Yes, it was $200 but think $40 of it was shipping, but I could be wrong. Can't remember much anymore it seems lol

Sent from my SM-G935V using Tapatalk
 

VU Sponsors

Top