Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
The biggest reason I've never tried my hand at DIY e-liquid is I know I'd just mess up the math real bad.Funny I can whip out codes for programs and do the really big math stuff but the simple things like percentages just gets all jumbled up in my skull until my eyes damn near cross...Not kidding!To be honest, I haven't tried many different juices, or mfgs of juices. I've tried maybe a handful +2, and its the first handful that made me get into mixing.
Most of the flavoring I have,I bought to make a juice that sounded good, but just didnt work for me...I like using this site mostly for rummaging through for recipes...
https://www.lediypourlesnuls.com/
I like the pictures lol
Then I read the recipes and go ok, I can make that... and then make a lil taster of it. Transfer the %'s to http://e-liquid-recipes.com save them and revisit later if they pan out.
How so?
Give me as many details as you can...Thanks!
No math needed, plug the desired percentages into that eliquid recipies site that socal linked to and it tells you how many ml to add for nic, vg, pg and flavorings. That's the easy part, coming up with or finding a mix that you like is the hard part if there is going to be one.
The math part is pretty simple...use the many online mixing calculators plug in the % recipes call for...and it give it back in grams...digital scale and weigh as you go.
Similar to this...
Or by weight, I still use syringes. My digi scale only goes down to 0.1 so haven't gotten into mixing by weight
Yeah, they don't even cost that much anymore. I really should grab one but I've been using syringes for a couple years now and fine with it.
The scale $ can go towards a never normal cap or NRC DT & ring for the haku to match the Pulse's Kawi green doors
The scale $ can go towards a never normal cap or NRC DT & ring for the haku to match the Pulse's Kawi green doors
Well fuck me running I didn't know there were online mix-master sites.
Last I remember there was something called (EJuice Me Up) which I just recently downloaded again...Sigh!
I can vouch for those scales, some of the best I’ve owned, used them multiple times a day for over 3 years on the original battery no less.
I don’t mess with syringes anymore, too much of a hassle. Got this graduated plastic beaker set from eBay for 5$ (nic river has the same ones)
And do 500 ml batches faster than I could do a couple 60 ml bottles. Hated drawing vg into a syringe.
Nope, not quick enough... Lol
I did get the allumide Tiki in the randomizer tho.
Sent from the Twilight Zone!
Thanks a lot all of you! I just bought a scale! 
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
AndriaD
Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Yeah it's like SUPER FRITOS! the minute you open the bottle.
I usually use TFA hazelnut DX to get the nutty effect; it's a little easier to work with, a little more subtle than either AP or CAP's hazelnut.Andria
I got the 3D squonker built. There are quite a few things I don't like about it, but for the price and if you already have a board and 510 lying around it's ok.
The squonk hole is a little tiny and there is no obvious method to get the output wire to the 510. The designer just lays it up against the top of the case which I didn't like, so I cut a groove for the wire with a Dremel ball mill. I would have much rather had the battery and bottle reversed, making it a side squonk and easy wire routing.
I have other bottles inbound and will be chopping some off of that BF tube. Also the PoS 21700 is just temporary until my KeepPower 20700's arrive from Illumn.
The squonk hole is a little tiny and there is no obvious method to get the output wire to the 510. The designer just lays it up against the top of the case which I didn't like, so I cut a groove for the wire with a Dremel ball mill. I would have much rather had the battery and bottle reversed, making it a side squonk and easy wire routing.
I have other bottles inbound and will be chopping some off of that BF tube. Also the PoS 21700 is just temporary until my KeepPower 20700's arrive from Illumn.
AndriaD
Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
That's why there are DIY ejuice calculators. http://www.ecigvape.com/pvn_calculator.php
I'm a total math doofus... but I can measure stuff! Been cooking for years.... and I think you cook, too. If you can cook anything more complicated than a bowl of cereal, you can DIY ejuice.
Andria
I got the 3D squonker built. There are quite a few things I don't like about it, but for the price and if you already have a board and 510 lying around it's ok.
The squonk hole is a little tiny and there is no obvious method to get the output wire to the 510. The designer just lays it up against the top of the case which I didn't like, so I cut a groove for the wire with a Dremel ball mill. I would have much rather had the battery and bottle reversed, making it a side squonk and easy wire routing.
I have other bottles inbound and will be chopping some off of that BF tube. Also the PoS 21700 is just temporary until my KeepPower 20700's arrive from Illumn.
View attachment 97733
I think if the bottle and battery were switched, I'd fear any juice leaking on the chip set, and it would be a 3d printed VT-Box
What
Went to a bit of trouble to put the bottle at the edge and then made a pokey hole squonker?
I cannot see is why not an edge squonker?I think if the bottle and battery were switched, I'd fear any juice leaking on the chip set, and it would be a 3d printed VT-Box
Went to a bit of trouble to put the bottle at the edge and then made a pokey hole squonker?
TD said they would want them switched, I said it would look like a VT-In Box since the squonk hole would of moved additionally the 510 would be centered. But I do agree that the squonk probably could of been edge
Ahh a communion topper.
what it reminds me of
what it reminds me of
Nope, not quick enough... Lol
I did get the allumide Tiki in the randomizer tho.
Sent from the Twilight Zone!
better looking mod IMO
I could easily live with a 3D printed Inbox style and a divider wall to keep the board out of the path of any leaks.I think if the bottle and battery were switched, I'd fear any juice leaking on the chip set, and it would be a 3d printed VT-Box
I agree, I'm just an old gamer that played Super Mario alot! Kinda want one just for kicks.
Sent from the Twilight Zone!
A DB2 style cutout would have been better, but I think the squonk option was an after thought to his regular 3D boxes. That offset tubing drives my OCD crazy, but it's using a 25mm Varitube BF and could have been made straighter with a 22mm one closer to the edge.
I could put a Sherman RDA on it will just a tiny smidgen of overhang on the sides. Trying to find a build for that with a DNA 75 would be quite the challenge though.
dunderhead
edit: this octo door is going to cost half the price that I paid for the mod
edit: this octo door is going to cost half the price that I paid for the mod
Last edited:
That RDA I linked above, is from Pe Ma and Raphael of 67 mods, watching the live video now...interesting RDA... Similarities to the Flave Deck, but both posts are on the same side... more designed for the high Ohm/low wattage vapers... Not a MTL...air compared to the NarDa in volume. They are in talks still about which caps will come with the RDA...Ultem/Delrin/Acrylic stock.
For 100mg, you just move the decimal place back for every ten millilitres.
10mg is 1ml per 10 ml
9mg is 0.9ml p/10ml etc
But it sez Smok on it?The perfect mod for the Wasp @Cromwell?
Not a squonk but great for tasting new juice.
View attachment 97754
JK
And it is not White!
It's a piece of Smok junk that was returned, the poor design of the battery door just needed a bit of adjustment. Looked good with the Wasp so it lives at the shop now...
Eh, didn’t know all of the Octo doors were for the Verso. Whomp whomp whomp
1 hour of sleep in last 36 while staring at a 10 hour shift is a bad place
I know how ya feel, I've had about 3 hours total inn the last 48 and still have 7 more nights of 12 hour graveyard shifts to go
A little follow up on those Apocalypse's on eBay, 100% authentic, wahoo!
Lightning fast shipping too.
Annnd I got lucky with the HMM drip tip color.
Gonna pick another couple up while all the colors are still around.
I KNEW there was a reason I bought six Gen2 BF pins..
Lightning fast shipping too.
Annnd I got lucky with the HMM drip tip color.
Gonna pick another couple up while all the colors are still around.
I KNEW there was a reason I bought six Gen2 BF pins..
Turned mine into an edge squonker
Also fucked up the original door and threw another together from a storage basket. It works, but isn't pretty
It's a rat rod...
3dp body arrived today... All assembled except for the magnets (hence the rubber bands)
Really enjoying it! It's so tiny and is packing a 21700! Feels great in the hand as well.
have one in black alumide coming also
S21 a+ by mushroom
2x700 mechanical
Nylon SLS print
MM510
YFTK 8ML silicone bottle
Solid silver contacts
Really enjoying it! It's so tiny and is packing a 21700! Feels great in the hand as well.
have one in black alumide coming also
S21 a+ by mushroom
2x700 mechanical
Nylon SLS print
MM510
YFTK 8ML silicone bottle
Solid silver contacts
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
3dp body arrived today... All assembled except for the magnets (hence the rubber bands)
Really enjoying it! It's so tiny and is packing a 21700! Feels great in the hand as well.
have one in black alumide coming also
S21 a+ by mushroom
2x700 mechanical
Nylon SLS print
MM510
YFTK 8ML silicone bottle
Solid silver contacts
Rubber band by???
Edge squonkers rule!Turned mine into an edge squonker
Also fucked up the original door and threw another together from a storage basket. It works, but isn't pretty
It's a rat rod...
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
That Ijoy showed up today -
Think I need to step back, at first I was feeling pissy and hyper critical about it - then realized had been squonkin' top-shelf mechs all day and was likely just being bratty with unfair comparisons, lol
But, it is certainly no power hitter
Think I need to step back, at first I was feeling pissy and hyper critical about it - then realized had been squonkin' top-shelf mechs all day and was likely just being bratty with unfair comparisons, lol
But, it is certainly no power hitter
Link me up, before you go go....A little follow up on those Apocalypse's on eBay, 100% authentic, wahoo!
Lightning fast shipping too.
Annnd I got lucky with the HMM drip tip color.
Gonna pick another couple up while all the colors are still around.
I KNEW there was a reason I bought six Gen2 BF pins..
View attachment 97768
I mean link (again) please
@hellcatrydr , get yo'self in here! You can MTL and squonk too!
I gave up MTL a year ago! I caved in to the pressure... and I sold all my Reos in 2012.
I'm so ashamed!
I'm still a dual user....so to speak, both MTL and DL! No other squonk mods????I gave up MTL a year ago! I caved in to the pressure... and I sold all my Reos in 2012.
I'm so ashamed!
What are you using to store your batches?