Ohming around .2 and not warm enough for meIm using 22 guage grinch wire and height might be a hair lower on mine
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
Sent from my SM-G950U using Tapatalk
With the above 2 pics now showing... on my computer wouldnt let me edit them out...so just added the same 2 from imgur instead...
I didn't get out today to mail those coils, but I will tomorrow... the charge didn't take on the battery so had to buy a new one. (Love Amazon same day delivery)
For that wire... do a 5 wrap with a slight spacing... remember its stainless... that .21 you're rocking jumps when heated.
That .15 Alien I made you...you're gonna like the vape of it, but hate the ramp up lol triple 24g cores uggh...but its just the first hit...once they warm its good...the fused and single wire coils wont have that issue.
That lil 2.5 alien will be a fast ramp and I think will be pretty decent...
Same with those single wire N80s I wrapped up... those will almost be insta hot
U say stainless when i pulse them on my regulated the resistance does not move i now have a 5 wrap para and it .o9 a little low and fn hot 22 is the smallest wire i have
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Para a no go burnt hits yuckU say stainless when i pulse them on my regulated the resistance does not move i now have a 5 wrap para and it .o9 a little low and fn hot 22 is the smallest wire i have
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Hows thiswell I was going off the fused clapton cover you showed me, just assumed that the round wire you had was also ss...only wire type that hit your .16 Ohm was Stainless on Steam Engine
View attachment 98049
Same with that coil...only thing that comes close to .09 is SS
Sent from my SM-G950U using Tapatalk
Got another Wasp in Vapemail today.
That makes either 6 or seven... I forget.
That makes either 6 or seven... I forget.
Hows this
Sent from my SM-G950U using Tapatalk
Do a placebo test for me with that coil...raise it up a tad more
I think why I get the warmth out of the coils I use at .2 and you dont get the warmth you want is coil height.
Hows this
Sent from my SM-G950U using Tapatalk
Pulled the cotton so you can see the height i run mine.
Now were talkin 5 wrap 3 id little space cant remember .16 or .19 and its warm to my likeingEither way... I'll mail those coils to you tomorrow flat rate 2 day... should have them Saturday latest. Homie needs some coils ;-) I'll spin the .2 Alien I use, I really think it will be warm enough for you...if not, remove a wrap for .16
Sent from my SM-G950U using Tapatalk
Mine might need to be a tad lower to rid the wistle are u seein my picks there all showin broke on my end
Sent from my SM-G950U using Tapatalk
The last one I saw was this one... but it said there was another picture...although only one showed up...
Edit: Also for the whistle...just slightly close the AF...should go away...I don't get the whistle unless I have it full open.
One of my attys was whistling the other day. The wife commented on it.
I told her I was vaping Asthma ejuice in it
After a confused look I got a swat on the shoulder
I told her I was vaping Asthma ejuice in it
After a confused look I got a swat on the shoulder
Hows the flav 22 af compared to phenom is it a little more or less
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
My take on the 20700 in a mech now that I've had a couple days with it.
It barely makes it through the day, but an 18650 doesn't.
I had to tweak my build to raise the resistance 0.2 to come in at 2.2 ohms due to the lack of voltage sag from a fresh battery. 2.0 was too hot with the 20700 and liveable with the 18650.
A more energetic vape as you are getting down to 4.0 volts. Much better vape when you are getting to around 3.9-3.8v, less sag.
20700 is hanging in there at 3.7, cooler but not feeling like I need to change cells right now right now. 18650 would be coming out by 3.7v.
3.6v the 20700 is done.
I think reduced sag lends to a hotter vape throughout the entire curve and being able to run it down a little lower without your vape production falling flat.
It barely makes it through the day, but an 18650 doesn't.
I had to tweak my build to raise the resistance 0.2 to come in at 2.2 ohms due to the lack of voltage sag from a fresh battery. 2.0 was too hot with the 20700 and liveable with the 18650.
A more energetic vape as you are getting down to 4.0 volts. Much better vape when you are getting to around 3.9-3.8v, less sag.
20700 is hanging in there at 3.7, cooler but not feeling like I need to change cells right now right now. 18650 would be coming out by 3.7v.
3.6v the 20700 is done.
I think reduced sag lends to a hotter vape throughout the entire curve and being able to run it down a little lower without your vape production falling flat.
AF is very similar...just not as finicky as the Haku ( my opinion) ... Like jmoney426... he gets whistling from his( Flave ) .. myself, train, lucy dont...similar to how I get whistling from the Haku, others don't. With the Flave I just do legs down, drop it in, center and shes rocking... Haku I need to adjust height depending on the build.
The Flave is a lot better since I bought the 510 adapter for it... out of the box you were stuck with their proprietary DTs...which almost suck as bad as the stock one on the Haku...almost
I used the DT from my SOI SZRDA til I bought the adapter.Building on the 2 is similar, but the Haku has the one open side where you can swing coils in... I just remove the screw if the coils I am using cant be poked in easily on the Flave...this is a non issue with fused and single wire.
Flavor I will give the ever so slight nod to the Flave...could be placebo...but my Bourbon DIY doesn't taste as good in the Haku with the exact same build, why I am interested in obtaining a cruiser...some have noted the cruiser highlights flavors differently than the Phenom due to the deck differences...don't really know...could be a total crap shoot and I end up instead of having the Flave which my Bourbon DIY tastes really good in...end up with a Cruiser where its worse off than the Phenom lol
But back to the AF... very similar in flow and amounts available...just how it interacts due to the differences in how the AF is delivered and the actual chamber size changes the way one would perceive the vape to be...and truthfully that is very subjective.
Nice write up im not that finicky of a vapor if it taste alright then its alright my palet is not strong enough to tell.unless its a hudge diff im vapein the b2k and phenom with same juice but complete diff builds and it taste almost the same lol im just not completly satisfied yet with this haku to me its another atty o well we will see in a day or soAF is very similar...just not as finicky as the Haku ( my opinion) ... Like jmoney426... he gets whistling from his( Flave ) .. myself, train, lucy dont...similar to how I get whistling from the Haku, others don't. With the Flave I just do legs down, drop it in, center and shes rocking... Haku I need to adjust height depending on the build.
The Flave is a lot better since I bought the 510 adapter for it... out of the box you were stuck with their proprietary DTs...which almost suck as bad as the stock one on the Haku...almost
Building on the 2 is similar, but the Haku has the one open side where you can swing coils in... I just remove the screw if the coils I am using cant be poked in easily on the Flave...this is a non issue with fused and single wire.
Flavor I will give the ever so slight nod to the Flave...could be placebo...but my Bourbon DIY doesn't taste as good in the Haku with the exact same build, why I am interested in obtaining a cruiser...some have noted the cruiser highlights flavors differently than the Phenom due to the deck differences...don't really know...could be a total crap shoot and I end up instead of having the Flave which my Bourbon DIY tastes really good in...end up with a Cruiser where its worse off than the Phenom lol
But back to the AF... very similar in flow and amounts available...just how it interacts due to the differences in how the AF is delivered and the actual chamber size changes the way one would perceive the vape to be...and truthfully that is very subjective.
Sent from my SM-G950U using Tapatalk
Use that Asthma ejuice it will cure the whistle.
Whistle is caused by your ejuice
Whistle is caused by your ejuice
Ya know, when I first got the Haku Phenom in, I was like, "My Goodness, fuck this POS" $125 and its not even that great...still think its a $60 atty at best.
But then I started going through the gauntlet of builds and found 3 that I like... slightly spaced 6 wrap 22g N80 3mm (.28) 3mm 26x2x36 Fused N80 3mm (.29-.31) and 26x3x36 N80 3mm Alien (.21-.22)
Of all the attys I bought since switching to squonking... Flave-Haku-Flave24 have been my top 3... Didnt like the Solo, Sentinel (AF is amazing though) Armor 1.0... Goon is actually pretty good...Hoping to be pleasantly surprised with the Stumpy I got from George... will find out on Friday
I should buy a Goon 22 and slap a BF pin in it.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Ya know, when I first got the Haku Phenom in, I was like, "My Goodness, fuck this POS" $125 and its not even that great...still think its a $60 atty at best.
But then I started going through the gauntlet of builds and found 3 that I like... slightly spaced 6 wrap 22g N80 3mm (.28) 3mm 26x2x36 Fused N80 3mm (.29-.31) and 26x3x36 N80 3mm Alien (.21-.22)
Of all the attys I bought since switching to squonking... Flave-Haku-Flave24 have been my top 3... Didnt like the Solo, Sentinel (AF is amazing though) Armor 1.0... Goon is actually pretty good...Hoping to be pleasantly surprised with the Stumpy I got from George... will find out on Friday
I should buy a Goon 22 and slap a BF pin in it.
I love the Goon 22 - have several of them lol
They are a totally different atty than Flave 22 though
But Odis 16 is my absolute fave at the moment - gotta have the ultem cap though or they get hotter than a bitch
Theres been quit a few of these problems he is replacing mine to very straight foward guy
Sent from my SM-G950U using Tapatalk
Too short for me...Cheers!The 2 drip tips I am currently using...
Sent from my iPhone using Tapatalk
If you haven't with those setups I'd suggest you might be doing it wrong.
Ah darn it!
Let a dude have his dreams.
I loved my Flave 22 enough to buy another. I love my Haku, and I'm getting another.
And I have two BF Goon 22's that I'd have to say are still among my favorites - I run duals in em - and I like to run duals - it lets me get extra surface area with simple wire builds...
And I have two BF Goon 22's that I'd have to say are still among my favorites - I run duals in em - and I like to run duals - it lets me get extra surface area with simple wire builds...
Ya know, when I first got the Haku Phenom in, I was like, "My Goodness, fuck this POS" $125 and its not even that great...still think its a $60 atty at best.
But then I started going through the gauntlet of builds and found 3 that I like... slightly spaced 6 wrap 22g N80 3mm (.28) 3mm 26x2x36 Fused N80 3mm (.29-.31) and 26x3x36 N80 3mm Alien (.21-.22)
Of all the attys I bought since switching to squonking... Flave-Haku-Flave24 have been my top 3... Didnt like the Solo, Sentinel (AF is amazing though) Armor 1.0... Goon is actually pretty good...Hoping to be pleasantly surprised with the Stumpy I got from George... will find out on Friday
I should buy a Goon 22 and slap a BF pin in it.
Stay safe by staying sane.In other words don't do anything crazy!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
It was easier to get four Flave 22 TIs than one Haku
36 hours exact to get a Bellcap & 4 bottles from Birmingham UK to Wisconsin (ordered it early Sunday morning).
Now if I could find my Entheon
Now if I could find my Entheon
Yep I like the Goon 22 clones I have.
Not Wasps but nice.
Yeah he's been hooking people up. Idk why he doesn't just send people a new positive block because everyone I've seen it was on the positive side. But Im not complaining, think I'm gonna send my SS cap out to get engraved!
Sent from my SM-G955U using Tapatalk
Ok enough is enough from AllianceTech
Sent from my iPhone using Tapatalk
I love that the Ti version doesn’t have any engraving on it. They should keep with that across all models... that logo is really tacky IMO.
Sent from my iPhone using Tapatalk Pro
Slow morning on my day off. Starting my day right with a haircut, shower, straight razor shave, a cup of Ethiopian Sidamo, and this setup filled with Yojimbo’s Reserve (vanilla caramel bourbon creme).
Sent from my iPhone using Tapatalk Pro
Still waiting on the TI Coppervape....
Good to see that you are still around Brewbear.
Hope you stuff did not get burned up.
Hope you stuff did not get burned up.
B2K KRNK in sale thread. Mine. Not a steal but throwing it out there...
Why didn't you like it?B2K KRNK in sale thread. Mine. Not a steal but throwing it out there...
Sent from my SM-G955U using Tapatalk
I do like it. It's a great vape, and easy to build. Just like others more
Nitpicks:
-It's a little tall
-I don't like the "vikset" style ufo cap... A little busy for my taste
-White is a little translucent
figured I'd try to get my cost back out of it while still a hot item.
AndriaD
Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
I saw a thing on weather.com that said Bel-Air has been evacuated. Maybe now that super-rich people are inconvenienced, it'll make the gov't get more serious about fire fighting. Or maybe half of the super-rich will move somewhere else and free up water resources for the rest of ya, instead of keeping it in their swimming pools.
Andria
I love being able to see through my caps and nothing's to tall for me after the Entheon. But I do get some leaking with it if it's tipped sideways at all after squonking, that's my only gripe.I do like it. It's a great vape, and easy to build. Just like others more
Nitpicks:
-It's a little tall
-I don't like the "vikset" style ufo cap... A little busy for my taste
-White is a little translucent
figured I'd try to get my cost back out of it while still a hot item.
Sent from my SM-G955U using Tapatalk
I've got the entheon slam cap set on the way to me
Am I the only one that's kinda pissed off at psyclone mods for the new accessories bundles? I like it but to get what I want I'd basicly have to buy all 4 kits for a $100! Fuck that.... Why not have a wide bore set and include the rings and colored orings? Idk maybe I'm crazy(no maybe about it, but I mean about this 
)
Sent from my SM-G955U using Tapatalk
)Sent from my SM-G955U using Tapatalk