Good to see u pop in mr buildersx
Sent from my SM-N950U using Tapatalk
x 
Sent from my SM-G950U using Tapatalk
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
Sent from my SM-G950U using Tapatalk
Funny u say that a guy on bookface pmed me asking if i wanted another bliss i told him yes always but depending condition and price he said brand new never fired stickers still on it i said sweet how much he said cant sell for rrp i paid more so okay how much he said 525 i almost pulled the trigger
Sent from my SM-G950U using Tapatalk
Love mine.Really liking the B2K
Sent from the Twilight Zone!
Sent from my SM-G950U using Tapatalk
Wow that looks like mine same build i think are u playin monkey see lol
It rounded up in ohms ...steam engine says its .286
It's the Cruiser though that I recoiled...but installed the same way.
Sent from my iPhone using Tapatalk
Sent from my SM-G950U using Tapatalk
Hate samsung i have one and its a fn headache never again
Sent from my SM-G950U using Tapatalk
Lol people slept on the DAV list, I was one of the 20 spots they had. Didn’t fill for almost an hour
Did I make you 3x28 core Aliens? Can't remember lol
Thought I made ya 3x26 core
Either way I need to get new swivels or one of those Spin LT deals...
Wow that got to you fairly quick too...much faster than the 35 days it took me for my Phenom
10 days, hit the list on the 13th and received/paid my invoice this past Friday and came today.
Awsome didnt care all that much for mine then got caps now ther both 2 of my favs
Sent from my SM-G950U using Tapatalk
Hell i dont no they look the same to me and they produce vapor lmao
Sent from my SM-G950U using Tapatalk
Must have gotten slammed during the holidays no doubt
Can you tell? Lmao yeah still learning the in's and outs...so far it's just been money flying out of my pocket.
Sent from my SM-N950U using Tapatalk
Welcome to the club! Bad bug this is, much money spend you will! But the SQUONK is strong!
No idea, they did a teaser post and nothing yet.
Without a deck picture it's just a cap.
Really debating on trading one of my Haku's for the Hussar...but I'll grab the clone first to see
Sent from my iPhone using Tapatalk
I guess it's a wait and see! Is the Hussar a better atty? Tighter draw? It looks like a fixed air flow.....kinda like the Apple of rda's iHussar v1.0
Last edited:
I guess it's a wait and see! Is the Hussar a better atty? Tighter draw? It looks like a fixed air flow.....kinda like the Apple of rda's iHussar v1.0
Pretty sure you can still turn down the air flow
Yup you can
Sent from my iPhone using Tapatalk
If that's a picture of the clone, they could've forgotten to drill it all the way thru?Pretty sure you can still turn down the air flow
Yup you can
Sent from my iPhone using Tapatalk
Hello bonkfuckr strangers!
Hope everyone is good...
I miss it here, busy as all gettout so just popping in to shoot a feeler because I've become more aggressive about my search for Le Concorde.
If anyone has an authentic they'd be willing to part with, please shoot me a PM.
Will pay cash. Or trade for a Flave22 Titanium.
As you were, soldiers...
A+
Hope everyone is good...
I miss it here, busy as all gettout so just popping in to shoot a feeler because I've become more aggressive about my search for Le Concorde.
If anyone has an authentic they'd be willing to part with, please shoot me a PM.
Will pay cash. Or trade for a Flave22 Titanium.
As you were, soldiers...
A+
Sounds like u need the new single airflow cap for the phenom
Sent from my SM-G950U using Tapatalk
That's part of the super secrecy of the facebook groups though. *grin*
Today it’s all about those three little words that get me all tingly and worked up.
Out For Delivery
Sent from my iPhone using Tapatalk Pro
Out For Delivery
Sent from my iPhone using Tapatalk Pro
First the good, it's Innokin and they are reputable for making good product. It is also a regulated mod which if you need that is of value. Alright, now I'll go on to my view. Apologies if my view holds an unbalanced number of negative points. You can take or leave my thoughts for what they're worth, or they're not worth.
That looks highly awkward to me. Not sure I like the idea of a vacuum built in as such. Yes, I know when one squonks it creates a vacuum, then you let off the vacuum goes to negative pressure. What this seems to go toward is a constant vacuum under pressure.
I would think that would lead to more wear down, more quickly. You would constantly have juice on the 510 pin to erode it away more so. Of course, this only from me seeing one video and consider too I'm human ergo prone to error, might be not seeing it correctly.
Filling from the top of mod like that reminds me of the top filled tanks. Sure, I reckon lots of folks find that handy. Not sure I could myself. I rather prefer taking a bottle out of a mod, fill the bottle insert full bottle back into mod and go. For myself the way I'm doing it seems the crux of simplicity.
All in, I would need to use one of these to give it further review. Not currently interested enough to seek out much as far as "new" product. These might indeed be the knees of bees.
Don't let my discouragement above stop you from trying them out and seeing for yourself. I'm just writing what I think from what little I see of it in the video.Well, I better get to ambling on a bit. Got some housework to do & I might ... who knows?
Today it’s all about those three little words that get me all tingly and worked up.
Out For Delivery
Sent from my iPhone using Tapatalk Pro
Saw your traffic post earlier... would of figured the 3 words would of been... Can of Worms and or Fuck this Shit, Why Today God! etc. lol
Haha I’m actually off today. Had to drive across town to get my car looked at. They give me a free rental while they have my car so it’s worth it to me.
I’ve actually got a black delrin Li-Mo DNA 75 with an extra stab wood door coming
Sent from my iPhone using Tapatalk Pro
Anyone ever swap a Mod Maker 510 for a Mod Dog Nano? I’m wondering if the hole for the treaded section needs to be modded to fit.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
MM510 the Diameter of the flange is the same, the thickness is different with the MM510 being .5mm and the threaded part is 12mm
MD510 has a 10mm thread and the thickness of the flange is 1mm
Length of the 2 is different also with the total length of the MM510 being 20.5mm and the MD510 17.8mm
ModDog510
Mm510
Okay so if I’m going from a MM510 to a MD510 that should be fine. The added washer that makes the MM 510 from 16mm to 22mm makes the landing pad 1mm thick... so long as the nut is tight on the threads the hole size should be fine as well. Thanks!
Sent from my iPhone using Tapatalk Pro
Also depends on the type of mod
conventional box squonker with the L shaped contact...the connecting point will be different and also if you're using the MD510 bridge or not can change how firm the button is and the throw distance.
Also depends on the type of mod
Yeah, if it can fit, the large nut is worth the extra $1.50.
Tempted to grab a sunbox game over from Squonk Radar when they go up on the site.
Also I suck at measurements. About to setup a stereo and my receiver is just a little too wide for my tv stand ;_;
Saw his post about those...but I've also read of mosfet failures on them recently on FB where they weren't responding to people and Customer service responses warranty etc.
Yep well designed Mosfet circuits are great. However ones that are not designed properly and have a tiny little SMT Mosfet that cannot dissipate the power/heat generated with normal operation...
Hadnt heard that, hoefully they fixed them with the new revision
I have doubts about the little switchfet thingys holding up well.
Hope I am wrong though.
Hope I am wrong though.
So the posts were answered, the Dudes of I'M etc were at a vape Expo so the whole weekend they weren't answering anything lol...
They said he could buy the replacement Mosfets from them directly.
Still doesn't change that a few posted int he same thread within 2 months of usage they killed a few...but they didn't elaborate on their usage... like 50w vaping or CloudsBroClouds near amp limit vaping.
Edit: Could just be the fail % that all manufacturing experience...or anything really...just speculating
In the GameOver Fb page...
https://www.facebook.com/groups/1911492052458957/
They said he could buy the replacement Mosfets from them directly.
Still doesn't change that a few posted int he same thread within 2 months of usage they killed a few...but they didn't elaborate on their usage... like 50w vaping or CloudsBroClouds near amp limit vaping.
Edit: Could just be the fail % that all manufacturing experience...or anything really...just speculating
In the GameOver Fb page...
https://www.facebook.com/groups/1911492052458957/
Even at a .0017 on resistance for a B3034 PBF Mosfet 20 amps will still generate around .7 watts and those mosfets on the switchfets are tiny...
and I am not sure what the on resistance is for those mosfets on the switchfet boards.
Using a full sized B3034PBF mosfet one should be fine though since they have a heatsink on the 220 package and are rated at a max of 375 watts with proper (massive) cooling. So intermittent use at .7 watts should not be an issue.
And with the B3034PBF the minimum on resistance is with 4.5 volts VGS. Since single battery mods will operate more around the 3.7 volt range the on resistance will be higher than .0017 ohms. I expect the switchfet mosfets are similar in this respect.
And as the on resistance rises so does the heat dissipated in the mosfet rise.
and I am not sure what the on resistance is for those mosfets on the switchfet boards.
Using a full sized B3034PBF mosfet one should be fine though since they have a heatsink on the 220 package and are rated at a max of 375 watts with proper (massive) cooling. So intermittent use at .7 watts should not be an issue.
And with the B3034PBF the minimum on resistance is with 4.5 volts VGS. Since single battery mods will operate more around the 3.7 volt range the on resistance will be higher than .0017 ohms. I expect the switchfet mosfets are similar in this respect.
And as the on resistance rises so does the heat dissipated in the mosfet rise.
Epic vape mail day... delrin Li-Mo DNA 75.
Just need to do something about that finger print and scratch magnet faceplate.
Sent from my iPhone using Tapatalk Pro
Just need to do something about that finger print and scratch magnet faceplate.
Sent from my iPhone using Tapatalk Pro
Epic vape mail day... delrin Li-Mo DNA 75.
Just need to do something about that finger print and scratch magnet faceplate.
Sent from my iPhone using Tapatalk Pro
Get a matchy matchy stab FP?
Get a matchy matchy stab FP?
Thought about that but I have no idea where to look!
Sent from my iPhone using Tapatalk Pro
DPM no?
EDIT: If you like the Ss FP, could pop it off and micro mesh it to remove the mirror finish...Micro mesh is only a few bucks
Just MM it in the same direction
DPM no?
EDIT: If you like the Ss FP, could pop it off and micro mesh it to remove the mirror finish...Micro mesh is only a few bucks
Just MM it in the same direction
I think that’s what I want to do is give a brush finish for the time being. Just PM’d a mod from DPM to see what my options are. Thanks for the tips!
Sent from my iPhone using Tapatalk Pro
Hi all. Got this mod and rda for review. With some time I'll post it up! The 2nd version if this mod just came out a few weeks ago. So far this one is full of flaws which is disappointing since it retails for $190....
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
Hi all. Got this mod and rda for review. With some time I'll post it up! The 2nd version if this mod just came out a few weeks ago. So far this one is full of flaws which is disappointing since it retails for $190....
Sent from my SM-G935V using Tapatalk
Is that an Anchor? The switch makes it look like a mosfet.
Sent from my iPhone using Tapatalk Pro
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Hi all. Got this mod and rda for review. With some time I'll post it up! The 2nd version if this mod just came out a few weeks ago. So far this one is full of flaws which is disappointing since it retails for $190....
Sent from my SM-G935V using Tapatalk
If the RDA came with it as a kit, I can guarantee it is garbage