Oh who shills?
And for whom?
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
And for whom?
Doubtfully that looks like a Japanese MapleHe meant trees.... like trees >>>>>
Edit- wonder if this will get removed? Lol
Sent from my SM-G955U using Tapatalk
Looks like something out of Heisenberg labs.Trying out the Dead Rabbit SQ for the first time tonight. So far I have ran a SS316L Fused 28g*2/40g and a 24g 316L Parallel through it. The vape is as good as the Pulse 22 so far but I'll be testing all night
Using this 510 drip tip with it:
He must have sold the S18 to YiLoong
http://www.3fvape.com/mechanical-mo...chanical-box-mod-white-pom-8ml-1-x-18650.html
km00
Member For 4 Years
Them gaps look terribly irritating!
Geekay Vapes’ review of the Gas Mods G.R.1 is up! Think I’ll be getting one.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Gonna have to watch later.I'm too tired currently.It is almost 6am here and I've only gotten 5 hours sleep in the last few days.
So goodnight to y'all bonking squonkies!
Who’s got something I want for my limo and pocket ds setup? ;-)
Last edited:
km00
Member For 4 Years
Anything specific that might tickle your fancy?
Squonk and squonk only lol, prefer regulated but may consider mosfet/mechs.
km00
Member For 4 Years
Of course squonk!
only thing I have in that ballpark in a Minerva dna 40 with 22mm and 16mm catch cup and extra door, panel and button
Edit: I could also throw in a matrix v2 with both flavour and cloud cap (cloud cap is hardly what would be classified at clouds bro clouds)
Of course squonk!
only thing I have in that ballpark in a Minerva dna 40 with 22mm and 16mm catch cup and extra door, panel and button
Edit: I could also throw in a matrix v2 with both flavour and cloud cap (cloud cap is hardly what would be classified at clouds bro clouds)
Appreciate at it but I’m not a fan of galactikas.
km00
Member For 4 Years
Yup, seems to be the norm. I suppose tootle puffin is not in fashion. Hey, the Minerva qnd the reo mini get along great :smoke:
I usually vape sub 40w just can’t stand the cups on them ;-) it’s why I get rid of my old galactika.
km00
Member For 4 Years
Totally, would of been so much nicer with a flush cup
Either crappy magnets, poor quality print or the bottle is installed incorrectly. My S21's do not have a gap like that!
Exactly! I’ve sold a few mods I didn’t want because of it not being flush.
True dat!
km00
Member For 4 Years
Oh you tease!Either crappy magnets, poor quality print or the bottle is installed incorrectly. My S21's do not have a gap like that!
would an 18650 work with a sleeve?
You should be able to use an adapter on any mod that's made for 2*700. So imo yes it would work.Oh you tease!
would an 18650 work with a sleeve?
Sent from my SM-G955U using Tapatalk
Thinking about putting up my two Orca mechs to get something special... I’m going to post in the Hardware thread once I get home from work but I thought I’d give a heads up. They’re going to be priced very nicely 
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
km00
Member For 4 Years
Dudes Just sent me pictures! Perfect
Edit: Are my batt wraps okay to use to shrink wrap the contacts? Or do I need the other type?
Last edited:
So I can see the allure of the Le Concorde...settled in on a simple 24g N80 3mm 5/6 wrap ( .40 ) slightly spaced sitting on the Pico Squeeze and its a pretty good vape... I think this RDA would be perfect for a regulated squonker where one could dial in the wattage regardless of coil...with me using mechs I was reaching for a little more wattage but unable to get it due to the lack of wire selection available. Was either just a tad much...or a tad short lol
Slapped it on my DNA and vaped it at 42w and its REALLY nice and smooth... just had to be a little careful dripping...the Squonk pin is perfect also...fairly robust and wide open.
The SXK's O-ring is shit though...I really think this RDA could of benefited from a dual o-ring system... and I don't have a thicker one to replace it which is odd... its like a stretched 16 x .75 ...everything I have is the 17 plus variant...you will have to wipe it down or the inside of the cap often to make sure it stays snug. Probably a non-issue with the authentic. The provided drip tip was sufficient but a larger radius one suits my preference...
Surprisingly I was rocking it with 2 holes open which is comparable to the Haku with just 1/5th open...but that comparison is also only single inlet air compared to dual...which is making me think about the single AF cap for the Haku...hmm
I'll probably pass on getting an authentic, but not because its not a good vape, but more its not my vape.
Like a few of you who found and stick with what works for you, I think the Haku is just that for me...that and the Stumpy/Flave22...I really like the vape from those two.
Apologies for the wall of text for those on your phone reading this
Slapped it on my DNA and vaped it at 42w and its REALLY nice and smooth... just had to be a little careful dripping...the Squonk pin is perfect also...fairly robust and wide open.
The SXK's O-ring is shit though...I really think this RDA could of benefited from a dual o-ring system... and I don't have a thicker one to replace it which is odd... its like a stretched 16 x .75 ...everything I have is the 17 plus variant...you will have to wipe it down or the inside of the cap often to make sure it stays snug. Probably a non-issue with the authentic. The provided drip tip was sufficient but a larger radius one suits my preference...
Surprisingly I was rocking it with 2 holes open which is comparable to the Haku with just 1/5th open...but that comparison is also only single inlet air compared to dual...which is making me think about the single AF cap for the Haku...hmm
I'll probably pass on getting an authentic, but not because its not a good vape, but more its not my vape.
Like a few of you who found and stick with what works for you, I think the Haku is just that for me...that and the Stumpy/Flave22...I really like the vape from those two.
Apologies for the wall of text for those on your phone reading this
I think it would. I'm out of town for the night but tomorrow I'll try a Pulse bf mod sleeve... If not it could be modified... These things are seriously tiny so you wouldn't notice externally. Here's next to a Pico squeeze for reference.Oh you tease!
I look forward to checking them out and hopefully purchasing one.Thinking about putting up my two Orca mechs to get something special... I’m going to post in the Hardware thread once I get home from work but I thought I’d give a heads up. They’re going to be priced very nicely
Sent from my iPhone using Tapatalk Pro
I agree.I just got my S21 body today and can't believe how small they are.Now i can't wait to get it built.
I have used Le Concorde extensively it was my favourite RDA of 2017.
I don't think it's about the ohm of the coil it more to do with positioning and wire type.
I found this RDA hates claptons etc and really shines with plain 24 or 26awg wire wrapped on 2.5mm ID. After much experimentation I've found the higher you can put the coil the better.
After hundreds of builds in it, my favourite is 6 wraps of 24awg Ni80 2.5id spaced. Gives a lovely warm dense vape with a perfect throat hit a 6mg
Sent from my Redmi Note 4 using Tapatalk
Finished my BF mod ,
Noisey Cricket V2 25mm
Installed a mod maker Feed tube from 510 into MM bottle,
Cut the front sqounky hole all working pretty dam well,
Now just need to buff out a scratch an be all shiney an new looking
Sent from my ONEPLUS A3003 using Tapatalk
Noisey Cricket V2 25mm
Installed a mod maker Feed tube from 510 into MM bottle,
Cut the front sqounky hole all working pretty dam well,
Now just need to buff out a scratch an be all shiney an new looking
Sent from my ONEPLUS A3003 using Tapatalk
I have used Le Concorde extensively it was my favourite RDA of 2017.
I don't think it's about the ohm of the coil it more to do with positioning and wire type.
I found this RDA hates claptons etc and really shines with plain 24 or 26awg wire wrapped on 2.5mm ID. After much experimentation I've found the higher you can put the coil the better.
After hundreds of builds in it, my favourite is 6 wraps of 24awg Ni80 2.5id spaced. Gives a lovely warm dense vape with a perfect throat hit a 6mg
Sent from my Redmi Note 4 using Tapatalk
I agree with a lot of what you said... I did a near same build as you mentioned but in 3mm and enjoyed the vape. Talked about it in post #29614
Finished my BF mod ,
Noisey Cricket V2 25mm
Installed a mod maker Feed tube from 510 into MM bottle,
Cut the front sqounky hole all working pretty dam well,
Now just need to buff out a scratch an be all shiney an new looking
Sent from my ONEPLUS A3003 using Tapatalk
Awesome job!
Sent from the Twilight Zone!
In an attempt to keep my response below PG-13.I was just going to just post a picture of an old timey feather duster.
But what the hell here's hoping for no judgments.
Another tiny cute mod/device.Either crappy magnets, poor quality print or the bottle is installed incorrectly. My S21's do not have a gap like that!
Link me up.
Very slick looking setup right there!Finished my BF mod ,
Noisey Cricket V2 25mm
Installed a mod maker Feed tube from 510 into MM bottle,
Cut the front sqounky hole all working pretty dam well,
Now just need to buff out a scratch an be all shiney an new looking
Sent from my ONEPLUS A3003 using Tapatalk
It's a byo "build your own" mod
Thanks , just had to wait on a few mod maker parts to arrive to complete , bottle and feed tube,
And buy a few more dremel disks ,
didnt think case would be as thick as it was,
been asked on Facebook to either sell it or build for a few other already .
loved my Coppervape V1 size shape but constantly cleaning contact so wanted switchfet type,
now saving for switchfet limelight in stab be my treat. For this year,
Sent from my ONEPLUS A3003 using Tapatalk
Oh never-mind then.
Thanks , just had to wait on a few mod maker parts to arrive to complete , bottle and feed tube,
And buy a few more dremel disks ,
didnt think case would be as thick as it was,
been asked on Facebook to either sell it or build for a few other already .
loved my Coppervape V1 size shape but constantly cleaning contact so wanted switchfet type,
now saving for switchfet limelight in stab be my treat. For this year,
Sent from my ONEPLUS A3003 using Tapatalk
While you're saving for your Switchfet, go ahead and save up for mine also... My address is 1336 La... Thx!
Thanks , just had to wait on a few mod maker parts to arrive to complete , bottle and feed tube,
And buy a few more dremel disks ,
didnt think case would be as thick as it was,
been asked on Facebook to either sell it or build for a few other already .
loved my Coppervape V1 size shape but constantly cleaning contact so wanted switchfet type,
now saving for switchfet limelight in stab be my treat. For this year,
Sent from my ONEPLUS A3003 using Tapatalk
I have a NC 25. Would you be interested in converting it to a squonk for a fee?
Sent from the Twilight Zone!
Maybe later...Cheers!
Two Little Orcas are up for sale in the Hardware section!
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Great job!Finished my BF mod ,
Noisey Cricket V2 25mm
Installed a mod maker Feed tube from 510 into MM bottle,
Cut the front sqounky hole all working pretty dam well,
Now just need to buff out a scratch an be all shiney an new looking
Sent from my ONEPLUS A3003 using Tapatalk
That didn't take long!
That's cause you got them rubber bands!Either crappy magnets, poor quality print or the bottle is installed incorrectly. My S21's do not have a gap like that!
Ha ha, not any more!That's cause you got them rubber bands!
So 90 plus 20 shipping for the KRMA :/
Probably a long shot,but anybody have a spare Modmaker large positive nut they'd be willing to part with?The only place i know of that sells them in the U.S. is Broscience and they are out,and shipping is too cost prohibitive to order just 1 all the way from the U.K. If anybody has one,let me know what ya want for it.