Become a Patron!

Squonkers are Bonkers

jasonandsarah

Gold Contributor
Member For 3 Years
it's a crappy boxmod, and $9.99 is the price.
Just searched it and I think your wrong. Only other cheap place is fasttech for $16.16, everywhere else is $24-$30. I can't speak to the quality as I haven't owned one, have you? If so what was wrong with it?

Sent from my SM-G955U using Tapatalk
 

PoppaVic

Gold Contributor
Member For 4 Years
I have yet to get my boss to spray a vt133 battery cover with rubberoid... He has car parts done with it, but...

I've got two coated in Bed Liner - you absolutely MUST put them aside for at least 3 days.
 

Papachaz

Silver Contributor
Member For 2 Years
it's a crappy boxmod, and $9.99 is the price.

Of course it’s not regulated for under 10 bucks and yes it’s abs and pc, just like in the description. The price is 9.90 but thanks for playing anyway.
dcaa63b7f5d4a6886c5c237d4a862c55.jpg



Carpe Nidor
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Of course it’s not regulated for under 10 bucks and yes it’s abs and pc, just like in the description. The price is 9.90 but thanks for playing anyway.
dcaa63b7f5d4a6886c5c237d4a862c55.jpg



Carpe Nidor
Might as well. Change the 510 and contact stripvif needed and bam. Good mod. I was looking at a vapor storm mod at fasttech today. I may still pick it up. And top it with the gunmetal recurve rsa but it's in pre order still. So would take forever.

Sent from my Nexus 6P using Tapatalk
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
FT has the Pulse regulated squonker on pre order for 40% off if you use the CC they provide when you look at the squonker.
Does not come in white.
And is a poke yer finner in the hole sqounker.
 

Arthur-VU

Silver Contributor
Member For 2 Years
Well I'm calling a hand check in, boss. Here we go.

View attachment 109423 View attachment 109424 View attachment 109425 View attachment 109426 View attachment 109427 View attachment 109428 View attachment 109429 View attachment 109430

Alright, @The Cromwell I hope these can let you see if I'm doing fair with the 26 awg SS316 parallel building, or not. If I'm not what can I do to improve? The brass Wasp's build is only 9 wraps and that put in at ~ 0.35 ohm according to Steam Engine, the Stainless Wasp is built at 10 wraps, which SE says is ~0.36 ohm or so.

Got no hot legs and they glow from center out in a nice even orange/red glow. The coils are not gunk covered, rather, the stainless steel has annealed itself with the pulsing heat. I just did use a wee bit of space between each wrap too. This genuinely made them into springs in a way. *chuckles* Keeps reminding me of the old Slinky toy.

Thanks for the photos.

Why is your Wasp Nano not screwed down all the way to sit flush on your mod here?

Is there something wonky with the 510 pin?
 
Last edited:

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Where is Floris delphino located? Italy correct? Trying to get location for currency conversion to see about shipping rape.i have all the internals already just need the box button and door

Sent from my Nexus 6P using Tapatalk
Nevermind it's in the site. Duh
 
Last edited:

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Just ordered a little black orca with a white button and frosted pearl white door. And on top will go my Entheon with white cap. Maybe call it the Storm Trooper.

Sent from my Nexus 6P using Tapatalk
 

BrewBear

Platinum Contributor
Member For 4 Years
Where is Floris delphino located? Italy correct? Trying to get location for currency conversion to see about shipping rape.i have all the internals already just need the box button and door

Sent from my Nexus 6P using Tapatalk
Nevermind it's in the site. Duh
You got it in one! Might want to check his site and see if you have to pay in euros (italian lira is pretty much on par with the mexican pesos) or USD.
 

PoppaVic

Gold Contributor
Member For 4 Years
Bear in mind, I posted of MAP before - that isn't a lie. (Not really a CC, either).

I'm just not sure it's still the best-price. I am SURE it's the best you'll get from FT, (but only if you remember it).
 

PoppaVic

Gold Contributor
Member For 4 Years
I really have no reason to do "us all a favor", but I been trying for years.

MAP is the one major "I see you!" code at FT.. I don't want to even know how many orders I was screwed on before I learned of it.
 

BrewBear

Platinum Contributor
Member For 4 Years
Think I'm going to order the Rage squonker by Desire. The rectangle jobs are getting a bit boring until a 250c comes along at a decent price...:wait:
It all depends on what a "decent price" means.....you could get a ultem BAM mod made with a DNA 250c for $550 or so, some might consider it a decent price, not that I would.....
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
You got it in one! Might want to check his site and see if you have to pay in euros (italian lira is pretty much on par with the mexican pesos) or USD.
It was euros. 50 euros ended up being like 63 usd

Sent from my Nexus 6P using Tapatalk
 

Train

Gold Contributor
Member For 5 Years
Woot. Got my long-wished-for blue Molly.
It's second-hand, but clean. Better than new, actually - first owner put silver contacts in, and did it properly.
Not the topper I'll leave on...I figured hey, it's blue, but....nah. I'll do some swapping around soon, I just wanted to vape it!

fourmollies-1.jpg
 

jcash74

Gold Contributor
Member For 5 Years
Woot. Got my long-wished-for blue Molly.
It's second-hand, but clean. Better than new, actually - first owner put silver contacts in, and did it properly.
Not the topper I'll leave on...I figured hey, it's blue, but....nah. I'll do some swapping around soon, I just wanted to vape it!

View attachment 109562
Those are beautiful!

I have to ask what is the blue one?
 

ben73

Gold Contributor
Member For 4 Years
Still awaiting some parts
But the mods here ,
Did sand a little on front an top to make smoother as i do have plans to redye it before building up
Its supposed to be a very tight squeeze,
Being such a small mod , I'm hoping will be perfect for pocket carrying.
But looks very fragile too,
f9475c39a742e9c3c36cf34eea4cd21b.jpg
c839db16d367ed3092d12828d9971dd4.jpg
b939bcd5ecd9069bfdeea45b60bd7327.jpg
cd5a4cab3777b74672ff4c3ae0bf0602.jpg


Sent from my ONEPLUS A3003 using Tapatalk
 

snake94115

Diamond Contributor
Member For 4 Years
OH! The "MAGIC CODE", yes.. "MAP" all items.. Of course, it's prolly still a lie, but yes - MAP all the thingies.
I remember a time when the only time "Map" meant anything was for use in (cartography)
And ship only meant a damn boat.
 

snake94115

Diamond Contributor
Member For 4 Years
It all depends on what a "decent price" means.....you could get a ultem BAM mod made with a DNA 250c for $550 or so, some might consider it a decent price, not that I would.....
Hey $550 is exactly how much my next trip to Mexico is going to cost.Want to contribute?
 

Zohmbiebuilds

Silver Contributor
Member For 3 Years
Wow that guys funny and the facial expressions! He should have more subs just for comedic purposes

Sent from my SM-G955U using Tapatalk
I feel like I'm the only one who hates comedy when I look for a quality review. I am by no means saying they have to have no personally. Not at all. But to make the entire first 5 minutes being a retard.. it's ok once maybe twice... But every fucking video?

I prefer Vic, Todd, postman. Even the bogan. I've chatted with Sam a couple of times in Instagram.

He's funny all around, but had decent reviews and isn't scared to tell it how it is.



Sent from my Z981 using Tapatalk
 

VU Sponsors

Top