Become a Patron!

Squonkers are Bonkers

fq06

Gold Contributor
Member For 4 Years
I picked up a Dead Rabbit SQ. Any thoughts?

Next acquisition likely to be the Ghoul...

Sent from my LG-H931 using Tapatalk


What did you think of the DRsq?
I moved up from a 3.5mm coil to 4.0 to fill up the chamer a bit more. Coil still at about a mm above the posts.

Really improved it, thick, wet, no spit vape:cloud:

20180428_130128.jpg
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Wismec Luxotic finally arrived. Nice little mod. First impressions, reminds my of a REO Grand in the hand. Door fits nice, magnets are crazy strong. The silicone bottle is nice, but stinks, literally stinks. Boiled it with some vinegar and water, got some of the stink off, now soaking in vodka.

All in all, nice little mod for the money.

View attachment 109756

Sounds like it is probably the mod putting out the stink, lol

I handled a Luxotic the other day for the first time - didn't remind me of the REO I had on me at all :confused:
 

b.m.

Silver Contributor
Member For 4 Years
You can get a pretty good alumilite resin on Amazon for like $90 a gallon. Witch comes with a gallon of each part A and B so it's actully 2 gallons. https://www.amazon.com/dp/B004Y46G10/ref=cm_sw_r_cp_apa_i_x4h5AbJ50YPJH
And reg epoxy resin for about $70 https://www.amazon.com/dp/B00NLPCA5Y/ref=cm_sw_r_cp_apa_i_z5h5AbN1S8CAY you could probably get this one cheaper if you looked hard enough is my guess.

Still trying to get my wife to get this for me from her work. She's a composite tech and works with carbon fiber and fiberglass so they get pretty good deals on "good" resin, west systems.

Sent from my SM-G955U using Tapatalk
Yeah,the alumilite was what i was looking at,but after a $100 cactus juice order,i just couldn't justify another almost $100 resin purchase at the moment haha.I'll get it evenually though,as i've seen a bunch of cool stuff made with it.Some very cool resin/wood hybrid pens and bowls,etc,not to mention the stab wood/resin hybrid mods.Another factor that has held me off is that to do it properly,you need a pressure pot to get all of the air out of the resin,so that's another $100 plus investment.I spent quite a bit on stabizing equipment,so it may be a long while haha.
 

SteelDriver

Gold Contributor
Member For 4 Years
Damn right. They have to get the TC to a point where it works better than that review by DJLSB (if I got the reviewer right) if they want to get me to spend my cash.


Sent from my iPhone using Tapatalk
DNA if you want tc all others pale in comparison.

Sent from my LG-D850 using Tapatalk
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Clear caps for O16 are sold out:gaah::gaah: I got an answer from Odis Designs, the clear caps and the ultem caps are $20 (from $25) and the black delrin caps are $15.
On second thought, maybe we can talk @The.Drifter to make a couple for us????

Ah, well at least I have ultem caps for all three and a spare black one - but I am really getting into the clear cap thang
 

Arthur-VU

Silver Contributor
Member For 2 Years
...It has always struck me as odd that so many 'reviewers' won't even give TC a little test since they don't vape that way normall
...Reviewers should review all the features of a mod, not just the mode they use regularly.

Love or hate him, but the only reviewer I've seen that regularly does TC testing on a mod, with the same atty, same resistance and testing for 420F, is 'Vaping with Vick'. He is pretty consistent with that part of his videos.
 

fozzy71

Silver Contributor
Member For 4 Years
Ah, well at least I have ultem caps for all three and a spare black one - but I am really getting into the clear cap thang
eww, i don't even like clear/frosted/ultem drip tips. I hate seeing all the vapor droplets collecting on them. I am however curious to see what options will be available for the recurve caps.
 

fozzy71

Silver Contributor
Member For 4 Years
Love or hate him, but the only reviewer I've seen that regularly does TC testing on a mod, with the same atty, same resistance and testing for 420F, is 'Vaping with Vick'. He is pretty consistent with that part of his videos.
yep, I actually like him and I don't buy a tc capable mod until I have watched a review by vic or djlsb. dj's tests are more technical but vic's tests are valid and equally as important IMO. phil does technical tc tests also but he hardly ever does reviews anymore, at least not on any mod I am have an interest in recently.
 

shawn.hoefer

Gold Contributor
Member For 4 Years
Love or hate him, but the only reviewer I've seen that regularly does TC testing on a mod, with the same atty, same resistance and testing for 420F, is 'Vaping with Vick'. He is pretty consistent with that part of his videos.
I wrote a piece about reviewers rejecting TC because "that's not the way they vape" comparing them to car reviewers that never actually drive the car... Hey, it starts and runs, and the radio works... Must be a great car... Who cares if the transmission or axles fail.

Sent from my LG-H931 using Tapatalk
 

Arthur-VU

Silver Contributor
Member For 2 Years
I just saw some new SHINY...

Wasp Nanos with polished/clear top caps, $13.59 USD on 3fvape:

authentic-oumier-wasp-nano-mini-rda-rebuildable-dripping-atomizer-w-bf-pin-transparent-silver-pc-ss-22mm-diameter.jpg

click to see the silver one on 3fvape

authentic-oumier-wasp-nano-mini-rda-rebuildable-dripping-atomizer-w-bf-pin-transparent-gold-pc-ss-22mm-diameter.jpg

click to see the gold one on 3fvape

I had tried to polish the frosted PC top cap on mine with toothpaste, and it did not do very much.

Some may be put off by seeing the condensation inside the cap, but I like the fact that I can see if the cotton is dry or wet inside and I don't mind the condensation.
 

Arthur-VU

Silver Contributor
Member For 2 Years
FT now has Wasp nano clones???
Not clones as far as I can tell, they have the authentics in various colors.

I dont see how or why the cloners would bother with the Wasp Nano since the authentics are so cheap.

What are they going to sell a clone for? $5?
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
FT now has Wasp nano clones???


:crazy:

eww, i don't even like clear/frosted/ultem drip tips. I hate seeing all the vapor droplets collecting on them. I am however curious to see what options will be available for the recurve caps.

To each his own Fozman

The mess is still there, lol
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
Not clones as far as I can tell, they have the authentics in various colors.

I dont see how or why the cloners would bother with the Wasp Nano since the authentics are so cheap.

What are they going to sell a clone for? $5?
Naah over $8.

Have 10 Wasps now but even as cheap assed as I am I would not get a clone when the authentic was only $2 more.

I have been polishing wasp caps. But have not gotten them to my satisfaction yet.
Close though.
Pretty clear though. I can see when my wick gets wet or if it is dry.
Have some polishing compound on order.
 

RSZ1

Bronze Contributor
Member For 2 Years
Member For 1 Year

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Naah over $8.

Have 10 Wasps now but even as cheap assed as I am I would not get a clone when the authentic was only $2 more.

I have been polishing wasp caps. But have not gotten them to my satisfaction yet.
Close though.
Pretty clear though. I can see when my wick gets wet or if it is dry.
Have some polishing compound on order.

Too bad I'm so lazy - I'd love to spiff up the frosted cap on the Demon Killer
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years

Arthur-VU

Silver Contributor
Member For 2 Years
Thanks for the link.

So a little more than half-price of the authentic ($8 vs $14).

I dunno, I am a frugal bastard, but not so much that the clone of a sub-$20 item would tempt me.

I'd rather feed money to Oumier so they keep making new and cool stuff for us.

Now an atty that costs $50+, and has a sub-$20 clone, sure, I will by the clone to try it out, and if I like it, then consider the authentic.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Which do you like better the Demon Killer Tiny or the Odis 16?

Authentic Odis 16 hands down for flavor - but the Demon Killer is just fun and a little cloudier than I normally vape

I have drip tips larger than the Demon Killer :giggle: It's like the cap is a drip tip
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
The clear one, which OMG INCLUDES the atomizer is also a lot cheaper than a Trinity glass cap, and less likely to shatter than glass if dropped.

I busted the shit out of a resin Wasp top cap - but in all fairness, I slammed it in a car door not once, but twice :facepalm:

Three posts in a row - Lord help me I'm turning into Snake :eek:
 

~Don~

Platinum Contributor
Member For 5 Years
So I tried to get along with the Hellfire Sentinel again today... no bueno...its shitty lol

Anyone want it? Free... I'll ship it out whenever I know I have errands near the post office.

SXK version.


EDIT: And we have a taker... I'll mail it off in the next few days
 
Last edited:

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
Authentic Odis 16 hands down for flavor - but the Demon Killer is just fun and a little cloudier than I normally vape

I have drip tips larger than the Demon Killer :giggle: It's like the cap is a drip tip
Am curious about the demon killer.
Can you use a drip tip on it?
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Okay - generally, Todd liked the Furyan - think I'll go for it even though it's presale

Anyone see a price less than FT with MAP?

Got the same issue as someone else at Yosen, $43 on the page, 70 something in the cart o_O
 

~Don~

Platinum Contributor
Member For 5 Years
Okay - generally, Todd liked the Furyan - think I'll go for it even though it's presale

Anyone see a price less than FT with MAP?

Got the same issue as someone else at Yosen, $43 on the page, 70 something in the cart o_O

Your favorite place...3f has it with 5% off
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
Okay - generally, Todd liked the Furyan - think I'll go for it even though it's presale

Anyone see a price less than FT with MAP?

Got the same issue as someone else at Yosen, $43 on the page, 70 something in the cart o_O
I got $58.67 with MAP.
Carried into checkout.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years

BrewBear

Platinum Contributor
Member For 4 Years
Okay - generally, Todd liked the Furyan - think I'll go for it even though it's presale

Anyone see a price less than FT with MAP?

Got the same issue as someone else at Yosen, $43 on the page, 70 something in the cart o_O
That's because they show the lowest price if you buy 100 or more units. If you buy 5, it will be $51.....
 

VU Sponsors

Top