Become a Patron!

Squonkers are Bonkers

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
This has huge compensation value. You know that rule about big, powerful, expensive mods? This has all 3
 

BrewBear

Platinum Contributor
Member For 4 Years
Alright since I’ve been MIA for a little bit, any suggestions on a flavorful MTL atty?
If you like a very tight draw, the old standards remain ( VA Cyclone v1, Chalice 3) as far as I know. A bit airier draw, Berserker MTL and Galaxies. I found them both to have a bit more air than I care for, put them back in the box....
 

Train

Gold Contributor
Member For 5 Years
I cannot, but just have to say - that's one of the most stunning mods I've ever seen - thought so since before you got it I think (I ogled pics when that batch was underway). And not just pretty, but REALLY well designed and built. Buyer's gonna be happy.


any interest in this?

asking $200 to your door with tracking [6-10 bus days]

series 8.4v MOSFET with 15 amp resettable fuse. Not a switchfet, no protection other than a fuse.

3000 year old bog oak stab, with corian caps

becu bridge with other internals 999 silver

more pics if needed

View attachment 112100 View attachment 112101 View attachment 112102 View attachment 112103
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
I cannot, but just have to say - that's one of the most stunning mods I've ever seen - thought so since before you got it I think (I ogled pics when that batch was underway). And not just pretty, but REALLY well designed and built. Buyer's gonna be happy.
thanks :)
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
longer term members of this thread may be familiar with mum's health issues

she went to a party today, and discovered her clothes don't fit with her new cute little pot belly

a year ago she was a US size 4/UK size 8 with a belt, now a comfortable US 6/UK 10

:bliss:
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
longer term members of this thread may be familiar with mum's health issues

she went to a party today, and discovered her clothes don't fit with her new cute little pot belly

a year ago she was a US size 4/UK size 8 with a belt, now a comfortable US 6/UK 10

:bliss:

Glad for you both!!!
 

chohan

Silver Contributor
Member For 4 Years
guess i need to order a couple more regular squeeze's before they discontinue them in favor of the Maxi Squeeze.

I may grab a couple more also. It seems they've deliberately disobeyed me after the email where I told them to give us the same form factor, unregulated mosfet and just slightly larger for a 21700. Although perhaps there is still hope?

Anyway, apologies for my absence bonkers. Trying to play catch up here but I got some new toys in from the UK to cater to my obsession for all things British.

Finally got my powder coated picos back from Nigel, this be the slimer green:

Pico_1200.png

Difficult to capture the texture...

pico_884.png

Also fresh from England (and the reason for my absence), my new Daystate Huntsman. I finally found a way to get back into shooting that won't drive my tinnitus through the roof, mwhahaha…

Huntsman01.png

cheers
 

Michael H.

Silver Contributor
Member For 4 Years
Placed an order for a new squonker...Pics to follow when I receive it...going with a black body with red transparent doors and red button and picked up an Ultem looking door set and button.. Made in the U.S.A. and very affordable.:cool:
 

BrewBear

Platinum Contributor
Member For 4 Years
I may grab a couple more also. It seems they've deliberately disobeyed me after the email where I told them to give us the same form factor, unregulated mosfet and just slightly larger for a 21700. Although perhaps there is still hope?

Anyway, apologies for my absence bonkers. Trying to play catch up here but I got some new toys in from the UK to cater to my obsession for all things British.

Finally got my powder coated picos back from Nigel, this be the slimer green:

View attachment 112116

Difficult to capture the texture...

View attachment 112117

Also fresh from England (and the reason for my absence), my new Daystate Huntsman. I finally found a way to get back into shooting that won't drive my tinnitus through the roof, mwhahaha…

View attachment 112118

cheers
Beautiful, both of them. And the caliber is???? Not the Pico, the other....
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Liking the looks and shape of Avidvape Throne Squonker. Haven't looked into their chip performance or anything else about it.
 

SteelDriver

Gold Contributor
Member For 4 Years
That works for most RDA, and I can agree regarding most RDA. The Gorge RDA though is one of those rare exceptions where conventional wisdom might hinder what needs done. In fact going contrary to what seems correct is exactly what gives the Gorge a surprising edge by its simplicity in building.
Gr1 is a take both screws out atty.

Sent from my LG-D850 using Tapatalk
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Where are you putting the drip tip that makes it changes the taste of yo juice:question:
Didn't know you had to put it somewhere. Just the thought of sucking in shit fumes would make anything taste bad to me.:blech:
Why? What do you do with it?
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
Gr1 is a take both screws out atty.

Sent from my LG-D850 using Tapatalk

Yes. See it over here and see another RDA I might want, need both. The only thing I might like different from what 3F has listed is one with a SS cap. Not keen on the black coating or paint. Sure black is 'classic' color. I just don't like it for on top of a silver SS looking mod. And yes, I know the Coppervape is a hunk of aluminum.
 

voicenyerhed

Gold Contributor
Member For 4 Years
Ordered a Pulse 80w mod & a Wasp Nano today. Really excited to get this in the mail. I'm hoping that the 20700s will give me a little more battery life and with all the great things I've seen on this thread about the Nano I can't wait to try it out.

Sent from my SM-G950U using Tapatalk
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
I wuz thinkin.
And yes I know it often gets me into trouble but...

On the comments about stuff not selling on here...
Is it possible we have pretty much reached market saturation as far as the VU crowd goes?
Time of year and vacation money is a priority?
Everyone spending all their money on CBD?

Just some random thoughts which mean very little in the grand scheme of things.
 

PoppaVic

Gold Contributor
Member For 4 Years
Well, I was all poised to order some RSA's and such when - the car decided "I will not run". I tried it a dozen times, just cranked; Neighbor tried it, just cranked. Called roadside, got it to Firestone - they claim it started. Then they decide they can't find a problem, but that's $200 - then they recommend a tuneup - well, by the time they are done NOT SOLVING it, I'm pretty well wiped out.

Yeah, could be the time of year.
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Mechanic shops can be thieves. They want to tell you how much $ they want, to tell you how much to fix it. And when that's done, they'll find more reasons why the same problem persists.
 

shawn.hoefer

Gold Contributor
Member For 4 Years
btw making an official complaint to the State Attorney Generals office next week about a CBD marketer that keeps calling me multiple times per day and will not stop. Filing a telephone harassment claim.
Ya know, if you would just use a while bunch of the CBD you wouldn't care about the calls LOL

In all seriousness, and with no judgement implied, I am generally opposed to CBD in vaping. The vape industry has a hard enough climb ahead of it without packing on pseudo-drugs.

Sent from my LG-H931 using Tapatalk
 

shawn.hoefer

Gold Contributor
Member For 4 Years
Anyone here own one of the Underground "style" squonkers? They look interesting and use 20700s, so might go on my list...

Sent from my LG-H931 using Tapatalk
 

shawn.hoefer

Gold Contributor
Member For 4 Years
Mechanic shops can be thieves. They want to tell you how much $ they want, to tell you how much to fix it. And when that's done, they'll find more reasons why the same problem persists.
We live in a tiny rural town. Once took our Subaru in for some repairs and the mechanic had never worked on one. After being in the shop for 3 months and spending nearly $800 we went and took it back. Apparently. He had replaces just about every component EXCEPT the faulty one. In his defense, I'm sure he would have got there eventually :p

Sent from my LG-H931 using Tapatalk
 

VU Sponsors

Top