Become a Patron!

Squonkers are Bonkers

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Haha no worries. I like mine, but I think it's better with the Hadeon cap. It smooths out the airflow.

Sent from my SM-G965U using Tapatalk
It looks so similar to the hadalay; which, I love. I’m looking into possibly trying either the gorge or the cp from asmodus next.
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
It looks so similar to the hadalay; which, I love. I’m looking into possibly trying either the gorge or the cp from asmodus next.
I'd go with the Gorge but just because it's a known value to me. It's basically a clone of the Alliancetech Flave but with an 810 drip tip instead of the dumb proprietary tip that came with it.

Sent from my SM-G965U using Tapatalk
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I think the Gorge has more Airflow doesn't it?
I believe so; but unsure.
I mostly like the appearance of the Asmodus.
I'd go with the Gorge but just because it's a known value to me. It's basically a clone of the Alliancetech Flave but with an 810 drip tip instead of the dumb proprietary tip that came with it.

Sent from my SM-G965U using Tapatalk
Leaning thag way.... I’m just a little wishy washy
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I have a 1:1 Flave clone.
good atty but I wish I could have a 510 tip fit in it...
I’ve gotten to where I don’t really like the 510 tips.. the only atty I use that still uses them is the hadalay and the kayfun series . Even my tugboats have drip caps on them.
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
I’ve gotten to where I don’t really like the 510 tips.. the only atty I use that still uses them is the hadalay and the kayfun series . Even my tugboats have drip caps on them.
Ohh I do not care for standard straight bore 510's either.
But I have found some wide bore ones with a funnel shaped inside at the top that I really like.
These are one variety.
https://www.fasttech.com/p/9213400

Just wonderful with a Wasp Nano.
Do not really care a lot for the Wasp without a good DT on top.
But with it a wonderful little squonk atty.
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Ohh I do not care for standard straight bore 510's either.
But I have found some wide bore ones with a funnel shaped inside at the top that I really like.
These are one variety.
https://www.fasttech.com/p/9213400

Just wonderful with a Wasp Nano.
Do not really care a lot for the Wasp without a good DT on top.
But with it a wonderful little squonk atty.

Those fasttech tips are nice, may have to get one for the kf5.
I sold my wasp with that big liquidation I did a few months back.
I use a dotmod friction tip on the hadalay and something similar on the kfun. For a while I using a serpent mini with crispy cap friction tip and it was as wide as the 810s.
I tried those crispy caps on the hadalay but it looked dumb.
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
Those fasttech tips are nice, may have to get one for the kf5.
I sold my wasp with that big liquidation I did a few months back.
I use a dotmod friction tip on the hadalay and something similar on the kfun. For a while I using a serpent mini with crispy cap friction tip and it was as wide as the 810s.
I tried those crispy caps on the hadalay but it looked dumb.
I also use them on my Subtank Minis, Serpents and Merlins.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Are those 510 or 810? FT details do not say, and I dont have a Hadaly so not familiar with it (yet).

Its 510 but gives it the width of 810 - they will only fit on a few types of atties that have a lip around where the 510 DT goes and a curve to the top cap

Fits Hadaly and Stumpy for sure, think maybe the Solo, if I remember right. I don't have a Solo, but seem to remember some were using the Signature Tips for Hadaly on the Solo

Here is the Hadaly without a DT to give you a visual

Topless.jpg
 

Arthur-VU

Silver Contributor
Member For 2 Years
Its 510 but gives it the width of 810 - they will only fit on a few types of atties that have a lip around where the 510 DT goes and a curve to the top cap

Fits Hadaly and Stumpy for sure, think maybe the Solo, if I remember right. I don't have a Solo, but seem to remember some were using the Signature Tips for Hadaly on the Solo

Here is the Hadaly without a DT to give you a visual

View attachment 115255
Understood. Thanks for the photo and clarification. I've got them in my FT wishlist as of now. :)
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I do not like that style the little ledge at the bottom inside collects condensation. The funnel style drain it back well.
Do they have one with a funnel?
 

TrollDragon

Silver Contributor
Member For 4 Years
ECF Refugee
I finally got rid of that blue swirly resin panel and hard AF bottle.
e6ds3cFh.jpg


Furyan will be here tomorrow and the VLS is all built and ready to go!
 

jcash74

Gold Contributor
Member For 5 Years
Entheon is dual coil right?
I try to stick with single for Mech BF mods.
Nvm I’m not that bright, had it confused with Something else
It's a single coil flavor atty. It's a little more airy than a hadaly for example. The hadeon makes it perfect (for me). Airflow is smooth and flavor is fantastic!
Edit: I see this was already answered prior to my post.


Sent from my Pixel XL using Tapatalk
 
Last edited:

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
It's a single coil flavor atty. It's a little more airy than a hadaly for example. The hadeon makes it perfect (for me). Airflow is smooth and flavor is fantastic!
Edit: I see this was already answered prior to my post.


Sent from my Pixel XL using Tapatalk

What killed it for me on the Entheon is the wells that pool juice instead of sucking it back into the squonk bottle :eek:
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
It's a single coil flavor atty. It's a little more airy than a hadaly for example. The hadeon makes it perfect (for me). Airflow is smooth and flavor is fantastic!
Edit: I see this was already answered prior to my post.


Sent from my Pixel XL using Tapatalk
Love
T hadaly; but would love a tad more airflow.
Unfortunately I’m at the stage with vaping that I’m picky..,really really picky.
I want 24mm, single coil, side airflow, a tad more airflow than the hadaly, hadaly flavor, an 810 driptip.
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
Love
T hadaly; but would love a tad more airflow.
Unfortunately I’m at the stage with vaping that I’m picky..,really really picky.
I want 24mm, single coil, side airflow, a tad more airflow than the hadaly, hadaly flavor, an 810 driptip.
Dude, get a CSMNT with a Squonk kit. Literally ticks all your boxes. You can run a single coil in that beeotch.

Sent from my SM-G965U using Tapatalk
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
And there's one in the classies. Lol not mine just shilling for a moment.

Sent from my Nexus 6P using Tapatalk
I have a stainless clone but I'm not sure the authentic caps and squonk kit would fit. Would look great on my Humble Bee mech squonker with a black cap!

Sent from my SM-G965U using Tapatalk
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
And there's one in the classies. Lol not mine just shilling for a moment.

Sent from my Nexus 6P using Tapatalk
I’ve been glaring lovingly at that one since it was released.
Think they’ll trade for authentic kayfun :giggle:
Drop Solo?
Still can't say enough about C4 LP. :D
I’m looking hard at the c4. Something about the looks of the drop just doesn’t appeal to me
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I went digging in my little box of ancient gear looking to play.
I rediscovered the tugboat v3. Put in a build and used my crispy cap.
Love it when old gear challenges the newer stuff in vape quality.
2A039874-88F9-4C80-9362-80DDE59CB855.jpeg
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
I’m looking hard at the c4. Something about the looks of the drop just doesn’t appeal to me
Same here about Drop Solo, kinda. I'm getting one though and like the look of it w/ PMMA cap, but not with that taller tip they have in the pics.
C4 has that SS looking line that I don't care for, and the tips it comes with are narrow bores with o-rings on them, but the tip can be replaced easy enough. Since I like the small bore 810 it comes with, that ss line is my only negative and that's subjective.
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Same here about Drop Solo, kinda. I'm getting one though and like the look of it w/ PMMA cap, but not with that taller tip they have in the pics.
C4 has that SS looking line that I don't care for, and the tips it comes with are narrow bores with o-rings on them, but the tip can be replaced easy enough. Since I like the small bore 810 it comes with, that ss line is my only negative and that's subjective.
The only reason the ss line doesn’t bug me is that if I do the black, on the black mod, it’ll kind of have the aesthetic of a murdered out Buick. Lol
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
till the mod shuts down from low battery.

Have noticed that with the Squeeze as well. Also note it holds at about what I would, a 20% head space. That last 20% of 'juice' on a battery helps get more charging cycles besides being simply a good safety practice.

I think the Gorge has more Airflow doesn't it?
I believe so; but unsure.

It likely has more airflow than most other RDA. Although you can get a real good restricted DL draw by adjusting its airflow down as tight as you need. This is another reason for liking the Gorge.

Had a fun day today. We have two inspections this week. The first is tomorrow, a general complex maintainance walk through. Possibly one on Friday that will be from the state, in which they do look over your housekeeping. That one is by random selection and mandatory.

We only needed to do a little tidying up. Wife kept going back and forth trying to find stuff I've been slacking on, which was not as much as she expected nor enough to keep her busy longer than a minute at each area. I got antsy. Her pacing around stirred feeling I'd really let the place go bad, and knew that was not the case.

I was vaping on that Dead Rabbit SQ today, still am. It may level up with the Gorge for me, difficult to call that. Have decided though single coil setups are very likely what I'll continue enjoying. Well, bit tired and medications are mellowing me down. Also looked over some markets for pulp style stories. Whew, calling the rack,' it saying "come and lay down, rest. Get more than four hours."

Nitol.
 

Train

Gold Contributor
Member For 5 Years
Good advice - too crowded and too hot, but we wanted to do it anyway, and had a fantastic time. That route after the tunnel was perhaps the best hike! While we were at the top, a quickie weather change provided some of the most dramatic experiences - from clear, bright and sunny to windy and raining to this, with a 20 degree temperature drop - all over a period of maybe 15 minutes...


6452.jpg

Zion NP is spectacular, but personally, I would not go this time of the year; it's too damn crowded. Don't forget the east side of the park. Just to the east of the tunnel, there's a trail read that's give you an easy hike (not much altitude change) to an absolutely spectacular overlook. If you keep going east to Mt. Carmel Junction, and then head north, it's not too far to get to Bryce Canyon NP either. Lots of amazing stuff to see..,

I take three mods on trips. A backup for my backup. :)
 

TrollDragon

Silver Contributor
Member For 4 Years
ECF Refugee
The Furyan arrived and even with the $30 CAD price, Albert threw in a bottle of Aqua and a Bandanna... I've spent a lot more other places and haven't so much even got a thank you on the packing slip... Albert is a top shelf retailer IMHO.

Now I just need a build for the VLS, the dual N80 claptons are a little too meaty...
Furyan.jpg
 

Michael H.

Silver Contributor
Member For 4 Years
The Ulton version is really decent and as far as I can tell 1:1.

I've used mine quite a bit and it's held up well.

Sent from my Mi A1 using Tapatalk

Thank you for the feedback....its on a wish list just wasnt sure really if it was a decent clone or not...ill give it a shot...thanks again
 

VU Sponsors

Top