Become a Patron!

Squonkers are Bonkers

Papachaz

Silver Contributor
Member For 2 Years
8bf4c4e6a79eed1de7e874a0e8e28c35.png

I brought the boomstick out of retirement. Man I missed this little cloud chucker.


Carpe Nidor
 
Last edited:

czombie

Member For 1 Year
Is there paint overspray in the Gloom clone's battery tube causing the batteries to fit tight..?? Might need to be sanded down a bit.

I wouldnt know because mine still hasn't made it to the states yet.
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
@jmoney426 , how do you like the Orion?
Make sure you have a back up or three with you, my Orion just went tits up!
You know I enjoy using it, but I think I would enjoy it more with the stock tip and airflow that comes with the pods. I have a Mantis Minimal tip that I've been using that has a single airhole and it's making it more turbulent.

I'll definitely be bringing a couple backups! I've been hearing more than I'd like to about Orions shitting the bed, bad pods, etc. Sorry to hear it happened to you! Bad board maybe?

Sent from the Death Star
 

BrewBear

Platinum Contributor
Member For 4 Years
You know I enjoy using it, but I think I would enjoy it more with the stock tip and airflow that comes with the pods. I have a Mantis Minimal tip that I've been using that has a single airhole and it's making it more turbulent.

I'll definitely be bringing a couple backups! I've been hearing more than I'd like to about Orions shitting the bed, bad pods, etc. Sorry to hear it happened to you! Bad board maybe?

Sent from the Death Star
I was on the Evolve website and saw a few people posting about the Orion just quitting, there is a link there, I opened a ticket with Evolve, let's see.

I'd say to hang on to the BB for now at least.:vino:
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
I was on the Evolve website and saw a few people posting about the Orion just quitting, there is a link there, I opened a ticket with Evolve, let's see.

I'd say to hang on to the BB for now at least.:vino:
I really hope it gets resolved for you!

Yeah the BB isn't going anywhere until I decide I really like the Orion and it proves to be reliable

Sent from the Death Star
 

BrewBear

Platinum Contributor
Member For 4 Years
I really hope it gets resolved for you!

Yeah the BB isn't going anywhere until I decide I really like the Orion and it proves to be reliable

Sent from the Death Star
I was at work when the bugger bit the dust! Long arse drive too! Fortunately I keep 2 BB in the car....
 

~Don~

Platinum Contributor
Member For 5 Years
I was at work when the bugger bit the dust! Long arse drive too! Fortunately I keep 2 BB in the car....
Wonder if Evolv will warranty it...wait nvm, its a LV item, has to go through them and their "Honest assessment" of why it failed and if its covered.
 

automaticfailure

Member For 4 Years
Is there paint overspray in the Gloom clone's battery tube causing the batteries to fit tight..?? Might need to be sanded down a bit.

I wouldnt know because mine still hasn't made it to the states yet.

There is overspray a bit on the underside of the so-called tube, but where the battery gets stuck is near the top. I plan on sanding it just a smidge to get rid of that but so far it hasn't torn any of my wraps or anything. Just a bitch to remove at times.
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
Wonder if Evolv will warranty it...wait nvm, its a LV item, has to go through them and their "Honest assessment" of why it failed and if its covered.
So LV has some kind of special condition where they have to assess it before Evolv can take care of it? That's bizarre.

Sent from the Death Star
 

BrewBear

Platinum Contributor
Member For 4 Years
Wonder if Evolv will warranty it...wait nvm, its a LV item, has to go through them and their "Honest assessment" of why it failed and if its covered.
I thought so too, but the people on the Evolve DNA Go forum were saying to open a ticket with Evolve! I guess we'll see, eventually!
 

snake94115

Diamond Contributor
Member For 4 Years
Man I just spent a fucking hour trouble shooting the Chi-NarDa lol

rewicked it and noticed it was getting extremely hot...like Metal semi grounded hot...and my wicks were turning brownish fast...

took the build out, ran it through the USC... cleaned the 510, wiped the connections... wicked...same...

Slapped it on another mod... not getting hot... so thought...hmm maybe the shitty MM510 is going bad on my Palm... nope...started getting hot again...


pulled the NarDa out again, pulled it apart... looked at the insulators... couldn't see anything wrong...


BUT!... Low and behold... there was a tiny ass 32g tiny as fuck trimming inside the RDA touching the positive pin and deck... Why the hell it didn't float away after a ultrasonic bath etc. I have no idea.

I saw it only by chance when I looked with a magnifier.

Mother fuck... seriously lol


Ok nothing to see move along HAHAHA
Well you got it sorted out in the end.Glad it is back to being vape worthy for you.
 

snake94115

Diamond Contributor
Member For 4 Years
I posted it as a WTF and Jmoney picked up on my "hmm" about it instantly lol

Not a fan of DotMod, to "Chink'ish" even for me (Yes I'm a chink lol)

Reminds me of Mirrored Rooms, Black and and Gold trim furniture, plastic on couches, plastic floor runners, smell of incense and Jasmine rice
Odd I thought you were Filipino which would make you a buk-buk or a LBFM if you were a chick.But what do I know I'm just an old mean redneck,hillbilly,peckerwood.
 

~Don~

Platinum Contributor
Member For 5 Years
Funny thing is that I emailed them about servicing the board on my Li-Mo when I had it. Evolv basically said it's too high end for them to feel comfortable fixing it.

Sent from the Death Star

Well I am just mentioning what I had to go through with my Therion 166 when I had it... my VT133 they took in, for they had a partnership at the time with Hcigar... but LV I had to ship to them to fix... mind you they are both located miles from each other lol and LV had to approve the repair.

Soon after it was fixed and returned I sold it.

Why I am hesitant on buying anything LV... Whole mushy button syndrome which a majority of their mods develop. Which you can tell by looking at them when the button doesn't sit flat to the mod case anymore... mod will fire...but not at all angles when pressed... and if you're one hand dominate you will wear out a side via presses before the other.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Whoa...an expensive wasp nano...50 bucks. Hmmmmm..

Sent from my SM-G950U using Tapatalk


Whaaaaa?????

Having it overnighted from China?
 

Pastorfuzz

Gold Contributor
Member For 4 Years
VU Patreon
Hello All. Got a couple of Profiles a few weeks ago.
A friend of mine told me to try SS316 mesh in it. Grabbed some and also used regular cotton rolled up to about the same density as the Wotofo wick.
Resistance came out to .17. Got it on my BF and it works great. Lots of flavor and clouds at 1/2 airflowProfile RDA 001.JPG Profile RDA 002.JPG Profile RDA 003.JPG Profile RDA 004.JPG
 

Zaxxaz

Silver Contributor
Member For 4 Years
I ordered a Vapefly pixie rda.Had 20% off at my freedom smokes,so it was just under $18 with shipping.Looks like a nice little flavor banger for a cheap price.Should pair up well with a pico squeeze.Was going to order a topside squonker also,but they are out of stock :(
 

Zaxxaz

Silver Contributor
Member For 4 Years

snake94115

Diamond Contributor
Member For 4 Years
Yes,VaporDNA has them in stock also. I wanted to order it from MyFreedomSmokes since I was ordering the pixie anyway,and the 20% off coupon would have applied to the topside also,so I would have saved a little bit. I'll get one next month when I have a little more money.Maybe I'll get one for my birthday or xmas lol
Sounds like a plan.

e37bb854705d2cb8131b3882bfa69f4feba9621dccc739eeca868064f1cd6bab.jpg
 

VU Sponsors

Top