Become a Patron!

Squonkers are Bonkers

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
wismec site have 45% off with code

ad on VU

cheaper than that?
The wismec store has them at 80$ so that’s around 45$ on sale.
Vaporl was 21$ including shipping.

Not really in the market for one, but i couldn’t pass it up.
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
all the manufacturers sites I have checked out will burn your butt on shipping charges.
Eleaf, Kanger,....
Never Tried Wismec but...
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Kayfun Lite is my basis for comparison when it comes to MTL

Sent from the Death Star

Never did have any of the Kayfuns; I did have the Russian 91% (much like the OG Kayfun). Been thinking about firing her up, haven't used it in a few years but haven't been able to get myself to part with it either, lol
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
i got that

but 40,000 odd replies here. And i don't remember you ranting for 6 months looking for the right air, like some

so i didn't know how tight you prefer
Until now I really haven't. I've gotten back into MTL as of late and I'm okay with the newer, looser style but prefer it on the tighter side.
Describing preferred airflow is like trying to lick your elbow. It's impossible and it makes you look stupid

Sent from the Death Star
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
Until now I really haven't. I've gotten back into MTL as of late and I'm okay with the newer, looser style but prefer it on the tighter side.
Describing preferred airflow is like trying to lick your elbow. It's impossible and it makes you look stupid

Sent from the Death Star

so is making recommendations when descriptions are vague lol
 

ben73

Gold Contributor
Member For 4 Years
Until now I really haven't. I've gotten back into MTL as of late and I'm okay with the newer, looser style but prefer it on the tighter side.
Describing preferred airflow is like trying to lick your elbow. It's impossible and it makes you look stupid

Sent from the Death Star
KHW -Jorda b RDA
is on the tighter side (1st Pic) it can go single pin hole pea through straw type
or 2 or 3 airflow holes
it is on tighter side to me.


The KHW pelso V3 also has some pin hole top caps a avalible for it, not tried them
But I do prefer that as a R-DTL draw on the single airflow hole . (2nd pic)


Le Condorde can do a loose MTL
3 airflow holes or 1 like
jorda B but slightly larger holes,
I would say jorda B is tightest draw,

But prefer the le concorde and pelso v3 over them, as these are my go to bf attys
9ba1c809fdd51ed2a1de3dd101a2c50d.jpg
e15e0daac445624db2def938572cdac1.jpg


Sent from my ONEPLUS A3003 using Tapatalk
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
Tried to order 2 White pico Squeeze's from GB and got to the end of the process and it said warehouse error....
Cannot ship to your country...

Ordered one from Ebay from HK.
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
KHW -Jorda b RDA
is on the tighter side (1st Pic) it can go single pin hole pea through straw type
or 2 or 3 airflow holes
it is on tighter side to me.


The KHW pelso V3 also has some pin hole top caps a avalible for it, not tried them
But I do prefer that as a R-DTL draw on the single airflow hole . (2nd pic)


Le Condorde can do a loose MTL
3 airflow holes or 1 like
jorda B but slightly larger holes,
I would say jorda B is tightest draw,

But prefer the le concorde and pelso v3 over them, as these are my go to bf attys
9ba1c809fdd51ed2a1de3dd101a2c50d.jpg
e15e0daac445624db2def938572cdac1.jpg


Sent from my ONEPLUS A3003 using Tapatalk
Jorda B! YES! Don't know how I forgot about that one. Focusing too much on the Dvarw I suppose...

Sent from the Death Star
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
Hey, @f1r3b1rd , got that Phoenix clone back on a mod again. Seems to be doing better for me. It is giving plenty of flavor & a nice round of cloud. Not sure what is different. Set it up the same as I had before. I think an alternate dimension me tried it first and was set upon discounting it. That's all I can deduce as being different.

Oh shoot. Too soon the typed words came. I'm going back to the Gorge. I am trying to like the Phoenix. *smh* I get maybe ten minutes of using it then, got to swap out. Still no where near to a reason why I'm having such odd reaction to it. If it isn't an alternate dimension me, then, reckon I'll blame Canada. ;) :D :)
 
Last edited:

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Hey, @f1r3b1rd , got that Phoenix clone back on a mod again. Seems to be doing better for me. It is giving plenty of flavor & a nice round of cloud. Not sure what is different. Set it up the same as I had before. I think an alternate dimension me tried it first and was set upon discounting it. That's all I can deduce as being different.

Oh shoot. Too soon the typed words came. I'm going back to the Gorge. I am trying to like the Phoenix. *smh* I get maybe ten minutes of using it then, got to swap out. Still no where near to a reason why I'm having such odd reaction to it. If it isn't an alternate dimension me, then, reckon I'll blame Canada. ;) :D :)
Lmao! Reckon Canada is as good a party to blame than any.
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
Today’s squonkers.
View attachment 130277
Sent from my iPhone using Tapatalk

Nice, had not yet seen newer Ka Bar knives. These look alright. I might stick to the classic U.S.M.C Ka Bar though, or maybe the British S.A.S paratrooper dirk. Who am I kidding? My most used will be her Paw Paw's Old Timer pocket knife he passed to me. Skinned out and field dressed a deer along a creek with her Paw Paw's knife. Had it done proper and quick. Took me all of ten minutes. The longest part of which was the bleed out.

Got it in the shed to do the butchering. I had to act as teacher, showing her BIL how to clean one up effectively but quickly. I would keep tossing aside the kitchen type knives and using the Paw Paw's pocket knife. Her BIL kept watching and asking why I laid a good knife down. "Don't need it," I finally told him. Had gotten back into the rhythm of Nature, Life.

Her dad had shot the deer from atop the hill. That meant he had shot it nearly from the road if not in the road. It was on private land, his dad's, his dad was well over age for lifetime right to kill varmint. But that bit regarding the road made me want the kill tucked away out of site in case a possum cop took notion to press the issue. Her dad had taken the shot, the only shot that could have been taken and he was sure no one was in danger. Think we ended up with around 20 pounds of meat. Could have gotten more but I was to let her BIL do some. There's butchering then there's butchering, and he sure butchered it.

I couldn't follow after what he'd done to clean up. Her Paw Paw just grinned at me and had me take the rest to the creek. The next day her Paw Paw told me when anything come to him, I was to take his knife, it was the one he explicitly carried. I was humbled and honored. The old man trusted me with both his "little girl" and his knife.

Apologies for a slight derail. Sometimes , ... well I think you'll understand.
 

b.m.

Silver Contributor
Member For 4 Years
They really are nice mods. Unfortunately one of mine has a sticky fire button, it is destined for an alcohol bath when I get the time.
I wasn't sure if i'd like it or not because of the weird button placement,but it turns out that's a great spot for it to fire with your thumb haha.I'm curious as to how hard these are to get apart though,both for any type of cleaning if juice gets down in there,and also because i am thinking of polishing the wood and possibly maybe doing a ca finish on it at some point.Being i just got it today,i won't mess with taking it apart right now,but sometime in the near future it will get a makeover
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
My $45 Luna showed up today,i really like this mod,now i think i may get 2 more,thinking a green and a red one may both be coming soon haha.
See how you are now? Go play with a little shiny and next thing you know, you've turned into a raccoon cub grabbing at the stars in the sky. :) I'm happy you found a mod you like.
 

b.m.

Silver Contributor
Member For 4 Years
I'm happy you found a mod you like.
Haha,that's the problem,i keep on finding mods i like,then i see another one i like,and on and on haha.I've been vaping close to 5 years now,and have been sqounking for probably 3 1/2 years,and every time i turn around i see a new mod i want.It's not as bad as it used to be,i've slowed down a lot,but there are still plenty that catch my eye haha.
 

ben73

Gold Contributor
Member For 4 Years
Jorda B! YES! Don't know how I forgot about that one. Focusing too much on the Dvarw I suppose...

Sent from the Death Star
I its too tight a draw for me, but is made for MTL,
Dvarw-22 on other hand thats just gem of an atty and the pelso v3, which took me a while to find an authentic in stock anywhere, ended buy from the shop that makes isles of custard juice last one in stock khw mods suppiled the extras delrin top PC top cap and Clapton clamps, and socket.

Sent from my ONEPLUS A3003 using Tapatalk
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
They look great. And I have wanted to get wood back in my collection.

Been considering rehoming most of my wood collection :(

At least the non-stab; it is humid as fuck at 100% of the time where I'm moving and wood furniture, etc tends to warp over time
 

VU Sponsors

Top