Become a Patron!

Squonkers are Bonkers

~Don~

Platinum Contributor
Member For 5 Years
So which cells are these the molicell P26A , your testing as genuine, on your BTC3200 charger ,
Need some new cells now so are these worth a buy

Sent from my ONEPLUS A3003 using Tapatalk

The ones in the picture are the ones IMR had a sale on for a $1.99 a pop... thus far in my not so professional opinion are Molicel P26A's... but IMR wasn't able to sell them since Liion Wholesale is the only reseller of "Authentic" Molicel's in the USA... so they called them OEM P26As lol

Thus far they meet the eye test... and I am checking capacity atm.

AS for being a good battery... I believe them to be just that...but you can't go wrong with VTC5As... or any higher end draining capable battery with 2500+mAh


I would really like some Samsung 20s and 24s... ya know for science ;)
 

ben73

Gold Contributor
Member For 4 Years
So which cells are these the molicell P26A , your testing as genuine, on your BTC3200 charger ,
Need some new cells now so are these worth a buy

Sent from my ONEPLUS A3003 using Tapatalk
Been busy with home improvement for a long time , kitchen out, wall s channeled, new electrics , replastered papered ,
And now have a full worktop for DIY builds and mainly for juice making making
Always been OTT with concentrate over mods.
But spent a bit this year on new atties and mod,
Pic is me trying to organise my stuff finally there for mixing nearly every juice i wana try but did over spend

Main Flavour mix concentrate in top
30ml , 300+
100ml x 100
250 ml x 18
26 liters concentrate in bottom shelf
15 liters VG
+ A draw full of 30ml inw
And 30mls of FA ,
4.5 liters nice left(freezer)
5liters PG
Got 3 more plastic containers to empty yet,
Plus some new ones , great thing of new kitchen is this side is just for me for mixing and storing on/in,
Atty check on last pic ,
ceda1181b80b14bf6ef7b2f2234c8b03.jpg
141c70c8b541fd5023cf9c4fd1fa7b71.jpg
2d246e2b23d262c8821c0f0a652da88a.jpg
0d89e8b70277b57d5103519f134b5126.jpg
3e78e3878156301306c9db4f4c9a3ceb.jpg
a8bc2e91367083e9508fa5bef993abb7.jpg


Sent from my ONEPLUS A3003 using Tapatalk
Now once all trim has been done , i can just top up a couple places round house and crack on building a shed at last he he,
 

~Don~

Platinum Contributor
Member For 5 Years
Been busy with home improvement for a long time , kitchen out, wall s channeled, new electrics , replastered papered ,
And now have a full worktop for DIY builds and mainly for juice making making
Always been OTT with concentrate over mods.
But spent a bit this year on new atties and mod,
Pic is me trying to organise my stuff finally there for mixing nearly every juice i wana try but did over spend

Main Flavour mix concentrate in top
30ml , 300+
100ml x 100
250 ml x 18
26 liters concentrate in bottom shelf
15 liters VG
+ A draw full of 30ml inw
And 30mls of FA ,
4.5 liters nice left(freezer)
5liters PG
Got 3 more plastic containers to empty yet,
Plus some new ones , great thing of new kitchen is this side is just for me for mixing and storing on/in,
Atty check on last pic ,
ceda1181b80b14bf6ef7b2f2234c8b03.jpg
141c70c8b541fd5023cf9c4fd1fa7b71.jpg
2d246e2b23d262c8821c0f0a652da88a.jpg
0d89e8b70277b57d5103519f134b5126.jpg
3e78e3878156301306c9db4f4c9a3ceb.jpg
a8bc2e91367083e9508fa5bef993abb7.jpg


Sent from my ONEPLUS A3003 using Tapatalk

Saw you post this in the mixing forum... first words in my head was, "DANG" lol
 

ben73

Gold Contributor
Member For 4 Years
Saw you post this in the mixing forum... first words in my head was, "DANG" lol
Took a long time to organise it all, some money in them flavours , from TFA ,Cap, TPA, FW, INW, FA, and a couple from cupcake worlds for some jammy mixes.
I was always more of chasing Flavour mixes rather than hardware,
Now im stocked up and can actually get at it easily.
Its g
Back to hardware till i find the last few bits,

Sent from my ONEPLUS A3003 using Tapatalk
 

Just Frank

Platinum Contributor
Member For 5 Years
I decided to try out this C4 that's been here for a few days. I put the ugliest build in it with some wire I've never tried (Wotofo Clapton 26ga+38ga). The wire is pretty thin and springy so I just kind of spaced it.

This RDA is for real. Way more flavor and better draw than the Recurve. It was simple and quick to set up. I used the little cut out for my jig and tryed to kind of center it on the airflow slots. But thats it. This wire is new to me but it's kicking some massive flavor my way. I guess I've never had an RDA work this well on the first try. It's just awesome. Thanks @nadalama for recommending this. I think I love it.

Picture of said ugly coil-
0410192007.jpg
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
I decided to try out this C4 that's been here for a few days. I put the ugliest build in it with some wire I've never tried (Wotofo Clapton 26ga+38ga). The wire is pretty thin and springy so I just kind of spaced it.

This RDA is for real. Way more flavor and better draw than the Recurve. It was simple and quick to set up. I used the little cut out for my jig and tryed to kind of center it on the airflow slots. But thats it. This wire is new to me but it's kicking some massive flavor my way. I guess I've never had an RDA work this well on the first try. It's just awesome. Thanks @nadalama for recommending this. I think I love it.

Picture of said ugly coil-
View attachment 135722

Mine continues to surprise me. So glad you like it!
 

Just Frank

Platinum Contributor
Member For 5 Years
I dont know how many wraps I did, but my coil above is a parallel. 3 full wraps (parallel)? Anyways, it's a .2Ω build. I wanted to see how it'd hit on one of my mech(like) squonkers. It works really well. I've tried all sorts of builds in different RDAs and didn't quite like how they did. I did a lot of things and none of my other coil setups worked as well as this. So its not only a good RDA, I found a build that works on them types of devices. Pretty cool :shades:.
 

~Don~

Platinum Contributor
Member For 5 Years
Well Discharged to 2.9v ...my charger says 2500-2543mAh with an average just shy of 2510 total mAh.

The data sheet... located here...https://cdn.shopify.com/s/files/1/0...R18650P26A-01-1.2_WM.pdf?14928966757459309626

2600mAh average @ 2.5v discharge
2500mAh minimum @2.5v discharge

to late to do the math of what .4v is of 2510 ;)

safe to say these are legit without doing a 10/20/30/40 amp load discharge test...
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
I dont know how many wraps I did, but my coil above is a parallel. 3 full wraps (parallel)? Anyways, it's a .2Ω build. I wanted to see how it'd hit on one of my mech(like) squonkers. It works really well. I've tried all sorts of builds in different RDAs and didn't quite like how they did. I did a lot of things and none of my other coil setups worked as well as this. So its not only a good RDA, I found a build that works on them types of devices. Pretty cool :shades:.

Do you have any pre-made Clapton wire? I know, I know, I'm like a broken record lately, but hey, I'm a relative newbie. I made a cool discovery (of what I think is someone's brilliance - not mine), and I'm still excited about it!

The coil I put in my C4 is a staged heating coil. I had never heard of it, but that doesn't surprise me. I'll explain, so please don't get insulted if you already know what this is.

What I used is Geekvape MTL Clapton wire, 28x2/38 n80, plus Lightning Vapes 24ga n80. Cut a piece of each the same length for a four- or five-wrap, 3.5mm coil. Wrap them in parallel, just like you would if it were two strands of 24ga. When you install the coil make sure the grub screw holds both pieces of wire securely.

This is a kick-ass coil. Durable and very responsive. Heats up quicker than you'd think, because of the conductivity of the round wire. Simple and inexpensive to make.

Steam-engine's overview:

Staged Coil.jpg
 

~Don~

Platinum Contributor
Member For 5 Years
Small update on the OEM P26As vs "Molicel" P26As.

I took a pair of brand new ones and ran them in the charger (Authentic) and they ended up within 20mAh of the OEM P26As...

Wish I had a load tester, but in this case, I am going to have to say... Looks like a duck...Quacked like a duck (capacity)...
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
Small update on the OEM P26As vs "Molicel" P26As.

I took a pair of brand new ones and ran them in the charger (Authentic) and they ended up within 20mAh of the OEM P26As...

Wish I had a load tester, but in this case, I am going to have to say... Looks like a duck...Quacked like a duck (capacity)...
Imr are so reputable that I'd trust them. Very few vendors that I would say that. But imr batts have a proven track record longer than my 5.5 years vaping
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Small update on the OEM P26As vs "Molicel" P26As.

I took a pair of brand new ones and ran them in the charger (Authentic) and they ended up within 20mAh of the OEM P26As...

Wish I had a load tester, but in this case, I am going to have to say... Looks like a duck...Quacked like a duck (capacity)...
Im Liking them as well. Took a set to work. Didn't move much meter wise. But now I actually had to work today. So wasn't as much truck time
 

~Don~

Platinum Contributor
Member For 5 Years
Imr are so reputable that I'd trust them. Very few vendors that I would say that. But imr batts have a proven track record longer than my 5.5 years vaping

I've ordered from them plenty of times and always received the items I paid for... this was more for posterity of those that may be in doubt.

I don't want to add conspiracy to anything, but a certain company is a patron to a certain guru... and another said company is working with said guru for vape specific batteries, thus why said guru says "Authorized" vendor of said batteries are only to be considered safe... which is true... somewhat.

Only way to debunk the legitimacy of said OEM P26As is to have them discharged tested the same way said Guru does, but with my above conspiracy thought, that will never happen and be published ;)
 

~Don~

Platinum Contributor
Member For 5 Years
Unless HJK does it, which was hinted at back in January... still can't locate said comparison test.
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
will likely put these two up for sale in the next 2 days

just want to sell one, keep one for vapergeddon stash

RRP $450 usd, will list them around $100 usd OBO

*bottle is 20.5 mm wide, won't fit a standard squonk bottle, you'll need 10ml auth sunbox (20usd) or to DIY from a needletip bottle)
 

Attachments

  • 20190412_101237.jpg
    20190412_101237.jpg
    239.8 KB · Views: 39
  • 20190412_101235.jpg
    20190412_101235.jpg
    148.5 KB · Views: 38
  • 20190412_101227.jpg
    20190412_101227.jpg
    136.2 KB · Views: 37
  • 20190412_101225.jpg
    20190412_101225.jpg
    141 KB · Views: 34
  • 20190412_101222.jpg
    20190412_101222.jpg
    116.7 KB · Views: 34
  • 20190412_101220.jpg
    20190412_101220.jpg
    177.8 KB · Views: 34
  • 20190412_101218.jpg
    20190412_101218.jpg
    119.9 KB · Views: 34
  • 20190412_101210.jpg
    20190412_101210.jpg
    182.8 KB · Views: 35
  • 20190412_101208.jpg
    20190412_101208.jpg
    134.4 KB · Views: 34
  • 20190412_101204.jpg
    20190412_101204.jpg
    156.5 KB · Views: 36

Just Frank

Platinum Contributor
Member For 5 Years
My VaporDNA otder showed up. I got an Elder Dragon and a HotCigs Castle RDA. But can any of you tell me whats wrong with this picture?
0413191250b.jpg

If you can't see it here's another-
0413191251d.jpg
 

Just Frank

Platinum Contributor
Member For 5 Years
Single airflow? Is it supposed to be?
No. That one side isn't drilled out all the way. They drilled it out too shallow. Makes me wonder the process these thing go through. Mine seems to have not been looked at or inspected at in the factory.
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
If I mail it to you, do you think you can drill it out perfectly so my airflow is smooth? Lol I'm just kidding. It really sucks because they sold out of them so I cant even get a replacement.
Lol I doubt I have to tools. I'm sure someone here does though. Depends on if you just want a refund or a refurb.
 

CaFF

Platinum Contributor
Member For 5 Years
No. That one side isn't drilled out all the way. They drilled it out too shallow. Makes me wonder the process these thing go through. Mine seems to have not been looked at or inspected at in the factory.


Wow, I don't think I've ever seen an atty that was completely un-drilled like that. o_O


OTOH, here's my Ghoul RDA I got for $8:

IMG_5323.jpg IMG_5329.jpg IMG_5327.jpg IMG_0264.JPG

Why they included a knurled drip tip, I have no idea...my lips ain't touchin' that.
 

CaFF

Platinum Contributor
Member For 5 Years
Been busy with home improvement for a long time , kitchen out, wall s channeled, new electrics , replastered papered ,
And now have a full worktop for DIY builds and mainly for juice making making
Always been OTT with concentrate over mods.
But spent a bit this year on new atties and mod,
Pic is me trying to organise my stuff finally there for mixing nearly every juice i wana try but did over spend

Main Flavour mix concentrate in top
30ml , 300+
100ml x 100
250 ml x 18
26 liters concentrate in bottom shelf
15 liters VG
+ A draw full of 30ml inw
And 30mls of FA ,
4.5 liters nice left(freezer)
5liters PG
Got 3 more plastic containers to empty yet,
Plus some new ones , great thing of new kitchen is this side is just for me for mixing and storing on/in,
Atty check on last pic ,
ceda1181b80b14bf6ef7b2f2234c8b03.jpg
141c70c8b541fd5023cf9c4fd1fa7b71.jpg
2d246e2b23d262c8821c0f0a652da88a.jpg
0d89e8b70277b57d5103519f134b5126.jpg
3e78e3878156301306c9db4f4c9a3ceb.jpg
a8bc2e91367083e9508fa5bef993abb7.jpg


Sent from my ONEPLUS A3003 using Tapatalk
Now once all trim has been done , i can just top up a couple places round house and crack on building a shed at last he he,

All I can say is...

Holy-ST-Cover_V002.jpg
 

IcepickMaker84

VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
The P26a is rocking my Crea! I was using VTC5A’s and while they are great they just seemed to lack a bit...in steps the P26a.

IMG_0912.jpg


Sent from the dark side of the moon.
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Haven't squonked for 2 days. WTF. Having withdrawals.

Sent from my LG-D850 using Tapatalk

Did someone break in and steal all your squonkers? Otherwise whatever has possessed you? :)

Put a different coil on my Flave (clone) RTA tonight. Have to say, it vapes a lot better now. It had been spitting and popping, just driving me crazy. Put it on the Vapor Storm Raptor that came yesterday. Makes a nice combo.

The Raptor, to have cost something like $17, is a nice box. The magnets could be a little more substantial, but there's a certain way to hold the doors as you put them on (the edge of the door seems to "tuck in" under a narrow lip that goes around the opening on the box) that seems to make them more stable.
 

~Don~

Platinum Contributor
Member For 5 Years
I haven't squonked in a long time... been on my RTA (Dvarw) kick for the past few months... I might wick up the Le Concorde...maybe... probably not, to lazy lol
 

gadget!

"The Trader"
VU Donator
Platinum Contributor
Member For 5 Years
VU SWAT
VU Patreon
Like a glove.
30T

Ok, sweet.
The 30T is an odd ball, it's a great battery but I have 2 mods that are 20700 mods and the 30T fits in both of them.
However, none of my other 21700s will fit.

It could be just the wrap because I re-wrapped one and it no longer fits in the 20700 mods.

Sent from a Galaxy far far away!
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
The 30T is an odd ball, it's a great battery but I have 2 mods that are 20700 mods and the 30T fits in both of them.
However, none of my other 21700s will fit.

It could be just the wrap because I re-wrapped one and it no longer fits in the 20700 mods.

Sent from a Galaxy far far away!
30T might be slightly slimmer than some others that came after it. Molicel's 21700 is supposedly a little fatter. Don't know about others. I could measure 30T vs Golisi S35 but no need really. Squeezer has room for a fatter 21700 no matter the wrap. I too think the wrap can make a difference sometimes. I use 30T in 3 mechs and S35 in 75C. I got the S35 a long time ago before Samsung came out with any, or this new crop of higher Mah 21700's.
 

gadget!

"The Trader"
VU Donator
Platinum Contributor
Member For 5 Years
VU SWAT
VU Patreon
21700 batteries with original wrap

Samsung 30T - 21.10mm
iJoy 5 leg - 21.51mm
Golisi S35 - 21.52mm

Sent from a Galaxy far far away!
 

gadget!

"The Trader"
VU Donator
Platinum Contributor
Member For 5 Years
VU SWAT
VU Patreon
If I didn't have 3 if them I'd buy one at that price...

Oh who am I kidding, I've always wanted the sub ohm edition.
I'll just sell one of mine.

Anyone wanting a good deal PM me or see it in the Hardware section soon. :)

Sent from a Galaxy far far away!
 
Last edited:

VU Sponsors

Top