Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
I don't know if I wants it.
Recent events with mods needing work have me questioning my stocks though.
So sick of the buying and selling roundabout.
Oh yeah, you wants it. You wants it very bad. Don't take my two cents for anything but that. It's a nice looker but me being Luddite would pass it over.
Mod salesman pitching mod to me: "Look it's wheat thrashing mod. Think of all the, ..."
Me yelling and making hex signs: "Quick, Mabel get the kids including the Welsh ones. We need to run for the hills! These devils got wheat thrashing mods now! The horrors! Run, run I tell you!"
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
If FedEx tracking is accurate I'll tell you all about the mini stick tomorrow
It's just too cool looking, I had to order one.
Sent from a Galaxy far far away!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
If FedEx tracking is accurate I'll tell you all about the mini stick tomorrow
It's just too cool looking, I had to order one.
Sent from a Galaxy far far away!
I will look forward to your thoughts on it
So? Well, to me it might warrant getting one, or two 18350 batteries. Although if so, it'll need to wait as I'm down in the "poor me" zone again. No creds or cashie monies here to buy vape gear.
Damn it all to hell! Don't need or want the TC but this might tempt me to get a regulated squonker. Shame I can't go buy right at present.
I know, I'll go whore myself to the skank a few apartments down. I'm sure I could make worth $200 from her. Tsk, oh I'm such a terrible person for even thinking that, much less cracking it as a joke. Maybe not, maybe just a vape addict.
Took full advantage of this deal myself, and quite pleased with it...
Sent from my SM-S767VL using Tapatalk
Damn those look nice
Well since this is a Squonker thread I'll throw a size comparison shot next to my Vicious Ant
First impressions...
IT IS SMALL! LOL
I like it but not a big fan of the RDA that came on it. I have a Drop Solo on it with a single 0.50 ohm Clapton and with the air flow closed about half way it's a slightly restricted DL hit but full of flavor! I'm vaping on some "Just Dew It" juice at 3mg from @debibnv.
Sent from a Galaxy far far away!
First impressions...
IT IS SMALL! LOL
I like it but not a big fan of the RDA that came on it. I have a Drop Solo on it with a single 0.50 ohm Clapton and with the air flow closed about half way it's a slightly restricted DL hit but full of flavor! I'm vaping on some "Just Dew It" juice at 3mg from @debibnv.
Sent from a Galaxy far far away!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Well since this is a Squonker thread I'll throw a size comparison shot next to my Vicious Ant
First impressions...
IT IS SMALL! LOL
I like it but not a big fan of the RDA that came on it. I have a Drop Solo on it with a single 0.50 ohm Clapton and with the air flow closed about half way it's a slightly restricted DL hit but full of flavor! I'm vaping on some "Just Dew It" juice at 3mg from @debibnv.
Sent from a Galaxy far far away!
Cute little fucker
I couldn't have said it better! LolCute little fucker
Sent from a Galaxy far far away!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
*mocking sniffing* You make me more sad. I cannot even afford that for piece of gear at them moment. Oh well, I'll sort it out, go sane or both.
Don't let shintyitus get you down. Some times I work 7 days a week to be able to get a piece of gear. Which turns into two or 3 week without a day off at all. Is it really worth killing myself for said item? Sometimes not when when I end up selling it anyways*mocking sniffing* You make me more sad. I cannot even afford that for piece of gear at them moment. Oh well, I'll sort it out, go sane or both.
I've been looking at shapeways.com at different mods. They've got one it's the whole mod including button and door for like 30 buck. The. Just need to pick up the contacts and rest of the innards.
It's an "Approved mod"
i built peko and gdna squonkers off there years ago. Bit of fun, but the mods just didn't do it for me
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Hard hitting mech, that one
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Hard hitting mech, that one
And a quite handsome to boot - thanks DogMan!
gopher_byrd
Cranky Old Fart
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
VU Patreon
They are not adjustable like the original REO 510.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
You adjust the height up or down by using the screwdriver directly into the pin but you have to get a good grip on the bottle cap and keep it stationary as you screw it up or down
I tried - but with confirmation, will try again.
It's like, it turns, but then I tighten back the cap from the bottom, and when i check, there's no change. Same height. Oddballz.
Anyway...they're all vaping nicely. Profile running is pretty "hot" for me - even after I trim the mesh thing. It's hitting around 0.27...
It's like, it turns, but then I tighten back the cap from the bottom, and when i check, there's no change. Same height. Oddballz.
Anyway...they're all vaping nicely. Profile running is pretty "hot" for me - even after I trim the mesh thing. It's hitting around 0.27...
Some 510s are reverse threaded.
The 510 is keyed underneath to adjust where you want the air holes to line up at.If you want to raise the pin,there is a shim that comes in the spares baggie.It's basically a hard plastic washer,a small o-ring would probably work too.
Ahhh - I recall talk of this shim, when the Coppervapes were newish...
I'll go look...I know i have the bag (and I think an "kit" for new contact too, even...)
I'll go look...I know i have the bag (and I think an "kit" for new contact too, even...)
Ordered a topside
Simple, VW or bypass. No TC or replay nonsense.
I'll probably hate it. I have never got along with squonk holes in that spot.
Vaping sucks
This is a great device. enjoy it
If you update the firmware, It will have TC.Ordered a topside
Simple, VW or bypass. No TC or replay nonsense.
I'll probably hate it. I have never got along with squonk holes in that spot.
Vaping sucks
Just sayin', it is always there if ya want it.no, as i said, the simplicity is part of what i like about it
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
no, as i said, the simplicity is part of what i like about it
I have never ever ever ever even once updated a mod
I always keep my mods on the very latest version.
Of course, they're all mechs, so it's not difficult...
Of course, they're all mechs, so it's not difficult...
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I always keep my mods on the very latest version.
Of course, they're all mechs, so it's not difficult...
90% of my mods are mech also
I seriously dislike fiddling with technology
nadalama
Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
I become a raving maniac in about 30 seconds flat from "fiddling with technology." It's even worse than screwing around with a sewing machine.
It comes from 10 years as a technology support and installation person. At the end of that time, I was ready to go voluntarily into a rubber room.
Am loving my mech squonkers more all the time. Except for one CV POS that got here with a faulty (read, dangerous) fire button.
Ram boxes don't look like they'd be "all that," but damn if I don't love mine to pieces.
I always keep my mods on the very latest version.
Of course, they're all mechs, so it's not difficult...
just posting to say, i don't think this got the recognition it deserves
lol
Funny enough, I use a modified sewing machine to make coil wire for my mech mods.
I run mech squonk mods exclusively, I don't like regulated mods. Simplicity is key in my opinion. They just don't die like a regulated mod does.
wildgypsy70
“Widgy Pidgy”
Staff member
Senior Moderator
VU Donator
Platinum Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I like mine. Super simple, no bells and whistles. I even got another one for the vapocolypse stash. Workhorse mod.It's OK
Heavy
It is not BAM level comfortable, but pretty good
I like the simple board. Just works
Spotted a mini istick and a pico in the wild yesterday.
But I'm not sure I've EVER seen somebody squonking!!! Have you??
Also, got this goofy-lookin' adapter 510 to 810.
And it works for me kinda! Let's me go to my vast collection of 810 tips and pop 'em on a Haku for instance. Now I can't decide, lol.
Hard to see, but top left is CF, kinda matchy with the door.
But I left the zebra-stripey one on there, for now...
But I'm not sure I've EVER seen somebody squonking!!! Have you??
Also, got this goofy-lookin' adapter 510 to 810.
And it works for me kinda! Let's me go to my vast collection of 810 tips and pop 'em on a Haku for instance. Now I can't decide, lol.
Hard to see, but top left is CF, kinda matchy with the door.
But I left the zebra-stripey one on there, for now...
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Never in the wild
nadalama
Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Read somewhere that the fire button mechanism on the Nudge squonker is the same one that's used on the Ram box, so I ordered a Nudge box off eBay. I hope it's legit - and I will know tout suite if it isn't. Obscenely cheap ($12.99 plus $4-something for shipping), so may be a dud, and if it is, then Paypal, here I come.
yeah, she caught the bug. Has 2 BAMs, an SE Box (italian) a Palm BF delrin, and a few others
it is nice having someone to compare mods with
gopher_byrd
Cranky Old Fart
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
VU Patreon
I've met up with squonkers from ECF in my travels, I guess that counts. @Train we just haven't flown through the same airports at the same time. If I have time to go outside of TSA, my REOs and I are definitely in the wild... I think I've run into one or two others with squonks as well.
gopher_byrd
Cranky Old Fart
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
VU Patreon
I'm seen in FAT, SFO, LAX, DEN, IAH, LIT, and MSY. Occasionally in others as well.Oh and hey, you'r in CA...I'm a "regular" at BUR and SMF and ONT.